Prestel EHD-4K100U 18Gbps HDBaseT Extender 150m with USB 2.0 User Manual
- June 13, 2024
- Prestel
Table of Contents
Prestel EHD-4K100U
18Gbps HD BaseT Extender (150m)
with USB 2.0
EHD-4K100U 18Gbps HDBaseT Extender 150m with USB 2.0
USER MANUAL
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
This 18Gbps HD BaseT Extender can extend HDMI signal, bi-directional IR
control signal and USB KVM signal to a distance up to 492ft / 150m (Long Reach
Mode) via a single CAT6 cable. This product converts HDMI signal to standard
HDBaseT signal and transmits it through LAN cable. It can easily control
signal source device or display device from the remote end through bi-
directional IR signal pass-through function. Video resolution is up to 4K2K
@60Hz YUV 4:4:4. It also supports POC function.
The extender can be widely used in other fields such as video conference
system, multimedia signal broadcasting, HDMI signal extension, etc.
Features
☆ HDMI 2.0b and HDCP 2.2 compliant
☆ Support 18Gbps video bandwidth
☆ Support video resolution up to 4K2K@60Hz YUV 4:4:4
☆ With Mode DIP switch to select HDBaseT Mode & Long Reach Mode HDBaseT Mode:
USB supports USB 2.0 transmission (support connecting with USB camera, USB
flash drive and other devices); the audio & video signal transmission distance
can be extended up to 328ft / 100m for 4K60 Long Reach Mode:
USB only supports HID (Human Interface Device) device; the audio & video
signal transmission distance can be extended up to 492ft / 150m for 1080P or
394ft / 120m for 4K60
☆ Bi-directional IR signal and USB KVM signal pass-through are supported
☆ Support bi-directional POC (Power over Cable) function
☆ Advanced EDID management
☆ Compact design for easy and flexible installation
Package Contents
- 1 x 18Gbps HDBaseT Extender (Transmitter)
- 1 x 18Gbps HDBaseT Extender (Receiver)
- 1 x IR Blaster cable (1.5 meters)
- 1 x IR Wideband Receiver cable (1.5 meters)
- 4 x Mounting Ears
- 8 x Machine Screws (KM3*4)
- 1 x 24V/1A Locking Power Supply
- 1x User Manual
Specifications
Technical|
---|---
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2
Video Bandwidth| 18Gbps
Video Resolution| Up to 4K2K@60Hz YUV 4:4:4
USB Compliance| USB 2.0
IR Level| 5Vp-p
IR Frequency| Wideband 20K-60KHz
** Transmission Distance| HDBaseT Mode: 4K60 –328ft / 100m Long Reach Mode:
1080P–492ft / 150m；4K60 — 394ft / 120m
Color Space| RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth| 8/10/12bit
HDR| HDR, HDR10, HDR10+, Dolby Vision, HLG
Audio Format| LPCM 7.1CH, Dolby True HD and DTS-HD Master
ESD Protection| Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact
discharge)
Connection**
Transmitter| Input: 1×HDMI IN [Type A, 19-pin female] 1×IR IN [3.5mm Stereo
Mini-jack] 1×SERVICE [Micro-USB jack] 1×USB [USB-B, 4-pin female] Output:
1×HDBT OUT [RJ45] 1×IR OUT [3.5mm Stereo Mini-jack]
Receiver| Input: 1×HDBT IN [RJ45 with light] 1×IR IN [3.5mm Stereo Mini-jack]
1×SERVICE [Micro-USB jack] Output: 1×HDMI OUT [Type A, 19-pin female] 1×IR OUT
[3.5mm Stereo Mini-jack] 2×USB 2.0 [USB-A, 4-pin female]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver:140mm (W)×65mm (D)×18mm (H)
Weight| Transmitter: 245g, Receiver: 249g
Power Supply| DC 24V/1A;
Support bi-directional POC function
Power Consumption| 13.2W (Max.)
Operating Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Operation Controls and Functions
5.1 Transmitter Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | PWR LED | The red LED is on when the Transmitter is powered on. |
| 2 | EDID DIP switch | Used for audio EDID setting (dial to COPY by default). |
COPY: Copy the EDID of the HDMI OUT port of Receiver.
STD: Default 1080P 2CH
3| SERVICE| Firmware update port.
4| DC 24V| DC 24V/1A power input port.
Note that the extender supports POC function, it means that either Transmitter
or Receiver is connected to 24V/1A power supply, the other doesn’t need power
supply.
5| HDBT OUT| HDBT output port, connecting to the HDBT IN port of the Receiver
with CAT6 cable.
6| Link Signal Indicator (Green)| ▪ Illuminating: Transmitter and Receiver are
in good connection status.
▪ Flashing: Transmitter and Receiver are in poor connection status.
▪ Dark: Transmitter and Receiver are not connected.
7| Data Signal Indicator (Yellow)| ▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
8| HDMI IN| HDMI signal input port, connecting to HDMI source device such as
DVD play or Set Top Box.
9| IR IN| Connect to IR receiver cable, the IR receive signal will emit to the
IR OUT port of the Receiver.
---|---|---
10| IR OUT| Connect to IR blaster cable, the IR emit signal is from the IR IN
port of the Receiver.
11| PC| USB-B port, connecting to PC.
5.2 Receiver Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | The power LED is on when the Receiver is powered on. |
| 2 | MODE DIP switch | Used for Mode switching (dial to HDBT by default). |
HDBT: Switching to the HDBaseT Mode.
Long Reach: Switching to the Long Reach Mode.
3| SERVICE| Firmware update port.
4| DC 24V| DC 24V/1A power input port.
Note that the extender supports POC function, it means that either Transmitter
or Receiver is connected to 24V/1A power supply, the other doesn’t need power
supply.
5| HDBT IN| HDBT input port, connecting to the HDBT OUT port of the
Transmitter with CAT6 cable.
6| Link Signal Indicator (Green)| ▪ Illuminating: Transmitter and Receiver are
in good connection status.
▪ Flashing: Transmitter and Receiver are in poor connection status.
▪ Dark: Transmitter and Receiver are not connected.
---|---|---
7| Data Signal Indicator (Yellow)| ▪ Illuminate: HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
8| HDMI OUT| HDMI signal output port, connecting to HDMI display device such
as TV or monitor.
9| IR IN| Connect to the IR receiver cable. The IR signal will send to the IR
OUT port of the Transmitter.
10| IR OUT| Connect to the IR blaster cable, the IR signal is from IR IN port
of the Transmitter.
11| USB 2.0 ports| Two USB-A ports, connecting to USB 2.0 devices. (The
maximum output current of a single USB 2.0 port is 500mA, exceeding which it
will not work.)
5.3 IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
Note:
When the angle between the IR receiver and the remote control is ± 45 °, the
transmission distance is 0-5 meters;
When the angle between the IR receiver and the remote control is ± 90 °, the
transmission distance is 0-8 meters.
Application Example
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>