How to set up the router to work as a AP mode?
- June 13, 2024
- TOTOLINK
Table of Contents
How to set up the router to work as a AP mode?
It is suitable for: N100RE, N150RT , N200RE, N210RE, N300RT, N302R Plus, A3002RU
Application introduction
AP mode,connect the superior AP/Router by wire, you can bridge the superior’s AP/Router wired signal into wireless Wi-Fi signals for Wi-Fi devices. Here we take A3002RU for demonstration.
Note: Confirm that your wired network can share the Internet.
Diagram
Set up steps
STEP-1:
Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.0.1 into the address bar of your browser.
Note:The default access address varies depending on the actual situation. Please find it on the bottom label of the product.
STEP-2:
User Name and Password are required, by default both are admin in lowercase letter. Click LOGIN.
STEP-3:
Enter the Advanced Setup page of the router, then follow the steps illustrated.
① Click Operation Mode > ② Select AP Mode- > ③ Click Apply button
STEP-4:
Next set the wireless SSID and password. Finally click Connect.
STEP-5:
Congratulations! Now all your Wi-Fi enabled devices can connect to the customized wireless network.
Note:
After the AP mode is set successfully, you cannot log in to the management page. If you need to make changes, please Reset the router.
DOWNLOAD
How to set up the router to work as a AP mode – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>