Prestel SP-H2-14T60 18Gbps HDMI 1×4 Splitter Over 60m CAT User Manual
- June 13, 2024
- Prestel
Table of Contents
Prestel SP-H2-14T60 18Gbps HDMI 1×4
**Splitter Over 60m CAT User Manual**
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
The 18Gbps HDMI 1×4 Splitter can distribute 1 HDMI source signal to any 4 display devices. Support video resolution up to 4K2K@50/60Hz 4:4:4. It is designed with 1 HDMI loop output and 4 CAT outputs. The HDMI signal transmission distance can be extended up to 35 meters at the resolution of 4K2K@60Hz, or 50 meters at 4K2K@30Hz, or 60 meters at 1080P@60Hz via a single CAT6/6a/7 cable. The product supports one-way IR control signal pass-through, audio extract function and advanced EDID management.
Features
- HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant
- Support 18Gbps video bandwidth
- Support video resolution up to 4K2K@50/60Hz 4:4:4
- Support HDR, HDR10+, HLG and Dolby vision
- Support up to 7.1CH HD audio pass-through
- Support digital and analog audio de-embedded output
- Extend the signal transmission distance up to 35 meters at the resolution of 4K2K@60Hz, 50 meters at 4K2K@30Hz, 60 meters at 1080P@60Hz via a single CAT6/6a/7 cable
- Support 1 HDMI input, 1 HDMI loop output and 4 CAT outputs.
- Support one-way IR control signal pass-through
- Advanced EDID management
- Support one-way PoC function (only from transmitter to receiver)
- Compact design for easy and flexible installation
Package Contents
- 1× 18Gbps 1×4 HDMI Splitter over 60m CAT
- 4× CAT Receiver
- 1× IR Blaster Cable (1.5 meters)
- 4× 20K~60KHz IR Receiver Cable (1.5 meters)
- 1× 12V/2.5A DC Locking Power Adapter
- 1× User Manual
Specifications
Operation Controls and Functions
5.1 Transmitter Panel
Front Panel
Rear Panel
Side Panel
5.2 CAT Receiver
5.3 IR Pin Definition
Note : When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.
EDID Mode
The defined EDID setting list of the product is shown as below:
ASCII Commands
The product also supports ASCII command control. Connect the SERVICE port of
the product to a PC with an USB cable. Then, open a Serial Command tool on PC
to send ASCII commands to control the product.
The ASCII command list about the product is shown as below.
Application Example
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>