TWINART 320 Passenger Floorboard Covers Instruction Manual
- June 13, 2024
- TWINART
Table of Contents
320 Passenger Floorboard Covers
Instruction Manual
PASSENGER FLOORBOARD COVERS – 320
Parts included:
BOARD COVER LEFT SIDE ——– 1
BOARD COVER RIGHT SIDE —— 1
ALCOHOL PAD ———————-2
-
Park on a level surface and shut off the motorcycle.
-
Clean the mounting surface with hot water and soap to remove all dirt and debris.
-
ATTENTION: Thoroughly clean the mounting surface with included alcohol pads to remove all wax, oil, and residue.
*NOTE: Do not install if the temperature is below 50° F. The adhesive will not cure properly. -
Remove the red adhesive backing and install the covers. Press the covers firmly onto the surface for 60 seconds. The adhesive cures within 24 hours.
WARNING:
Ignoring the instruction may result in potential serious injury, death or
material damage.
Limited Warranty:
Products are warranted to be free of defects in material and workmanship for 1
(one) year from date of purchase by the consumer.
Customer must show proof of purchase for warranty.
Twiner shall not be liable for any consequential and incidental damages.
The products must be installed properly and operated under normal conditions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>