TWINART 315 Chrome Engine Guard Covers Installation Guide
- June 12, 2024
- TWINART
Table of Contents
TWINART 315 Chrome Engine Guard Covers
PARTS INCLUDED
- ENGINE GUARD COVER LEFT SIDE
- ENGINE GUARD COVER RIGHT SIDE
- ALCOHOL PAD
WARNING:
IGNORING THE INSTRUC- TION MAY RESULT IN POTEN- TIAL SERIOUS INJURY, DEATH OR
MATERIAL DAMAGE.
- PARK ON A LEVEL SURFACE AND SHUT OFF THE MOTORCYCLE.
- CLEAN THE MOUNTING SURFACE WITH HOT WATER AND SOAP TO REMOVE ALL DIRT AND DEBRIS.
- ATTENTION: THOROUGHLY CLEAN THE MOUNTING SURFACE WITH DENATURED ALCOHOL TO REMOVE ALL WAX, OIL, AND RESIDUE.
- “NOTE : DO NOT INSTALL IF THE TEMPERATURE IS BELOW 50° F. THE ADHESIVE WILL NOT CURE PROPERLY.
- THIS ITEM HAS LEFT AND RIGHT SIDES. CHECK THE SIDE BEFORE ADHERE. THROTTLE SIDE IS A RIGHT SIDE*
- REMOVE THE RED ADHESIVE BACKING AND INSTALL THE COVERS. PRESS THE COVERS FIRMLY ONTO THE SURFACE FOR 60 SECONDS. THE ADHESIVE CURES WITHIN 24 HOURS.
LIMITED WARRANTY
- PRODUCTS ARE WARRANTED TO BE FREE OF DEFECTS IN MATERIAL AND WORKMANSHIP FOR 1 (ONE) YEAR FROM THE DATE OF PURCHASE BY THE CONSUMER.
- CUSTOMER MUST SHOW PROOF OF PURCHASE FOR WARRANTY.
- TWINART SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND INCIDENTAL DAMAGES.
- THE PRODUCTS MUST BE INSTALLED PROPERLY AND OPERATED UNDER NORMAL CONDITIONS.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>