J M CORPORATION LPCBA-100 License Plate Mounted CB Antenna Instructions

June 13, 2024
J M CORPORATION

LPCBA-100 License Plate Mounted CB
Antenna Instructions

LPCBA-100 License Plate Mounted CB Antenna

#LPCBA Series
LICENSE PLATE MOUNTED CB ANTENNA

INSTALLATION

  1. Hold the antenna mounting bracket against the license plate bracket in the desired position. Mark the position of the holes to be drilled and the line where the excess mounting bracket is to be trimmed off.
  2. Drill holes and saw off the excess bracket.
  3. Sandwich the antenna mounting bracket between the license plate and the license plate mounting bracket and secure.
  4. Attach the ground wire to a frame bolt.
  5. Run the coaxial cable to the JMCB-2003 handlebar-mounted audio system and connect.

Note: This antenna has been designed to mount to your motorcycle easily and attractively. The antenna staff has been pre-tuned specifically for use with J&M’s JMCB-2003 CB. No further tuning is required.
Thank you for the confidence you have shown in J&M by purchasing one of our innovative products. If you have any questions during installation, or require further assistance, you may call J&M at 800-358-0881 from 8:00 a.m. to 5:00 p.m. Mountain Standard Time, Monday through Friday.
J M CORPORATION LPCBA 100 License Plate Mounted CB Antenna -
feager

J & M Corporation Tucson, AZ USA
800-358-0881
e-mail: audio@jmcorp.com
web: http://www.jmcorp.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals