Prestel DSP-OC4 4 Channel Line Output Card User Manual
- June 13, 2024
- Prestel
Table of Contents
Prestel DSP-OC4 4 Channel Line Output Card
Product Information: 4-Channel Line Output Card DSP-OC4
The 4-Channel Line Output Card DSP-OC4 is an analog output card that provides 4-channel line output. It is designed with a plug-in connector and electron balance output. This card allows control functions for each output, including gain level and mute control.
Features
- 4 balanced line outputs
- Dynamic range of 118dB
- Quick installation ports
- Control and configuration completed via software
Specifications
- Model : DSP-OC4
- Dynamic range : >118dB
- Frequency response (+/-2dB ): 20Hz-20kHz
- Output impedance: 102 ohms
- Channel crosstalk: -112dB
Product Usage Instructions
- Ensure that your device is powered off and disconnected from the power source.
- Locate the slot where the 4-Channel Line Output Card DSP-OC4 will be installed.
- Gently insert the card into the slot, aligning the plug-in connector properly.
- Tighten any screws or fasteners to secure the card in place.
- Connect the necessary audio cables to the balanced line outputs on the card.
- Power on your device and launch the software required for control and configuration.
- Use the software interface to adjust the gain level and mute control for each output channel.
- Test the outputs by playing audio through the connected devices and verifying the sound quality.
Refer to the user manual for more detailed instructions on using the software interface and additional features of the 4-Channel Line Output Card DSP-OC4.
4-Channel Line Output Card DSP-OC4
Analog output card provides 4-channel line output. lt uses plug-in connector and electron balance output. Control functions for each output include gain level and mute control.
Features
- 4 balanced line outputs
- Dynamic range 118dB
- Provides quick installation ports
- Control and configuration completed via using software
Specification
| Model | DSP-OC4 |
|---|---|
| Dynamic range | > 118DB |
| Frequency response (+/-O 2dB) | 20HZ-20KHZ |
| Output impedance | 102 ohms |
| Channel crosstalk | -112dB |
| Total harmonic distortion(THD+N) | <0.002% |
| Maximum input level(@1% distortion) | +22dBu |
| interface | Four 3-pin Europeansplit terminals |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>