Mr Maria MRLED8 Remote Kit Remote control included User Manual
- June 4, 2024
- Mr Maria
Table of Contents
Mr Maria MRLED8 Remote Kit Remote control included
This Remote Kit contains everything you need to operate your Mr Maria lamp with a remote control. The Mr Maria Remote works best when used from a distance between 1,5 and 3 meters.
PACKAGE CONTENTS
- Mr Maria Remote incl. CR2032 battery (fig.1)
- LED light source (MRLED8), 2700 Kelvin and max. 270 Lumen
- Power cable
- Optional: adapter block (low voltage)
- This manual
MAKE IT SHINE
- The new LED light source contains a receptor for the signal of the Mr Maria Remote. Therefore first replace the current LED light source with the new one and use the same three screws to hold the LED lamp in place.
- Unscrew the strain relief from the LED light source, using a Philips screwdriver (not included), and plug the cable into the DC port. Reattach the strain relief in order to fixate the con-nected parts. (fig. 2)
- 3. Connect the power cable to the adapter block and plug the Mr Maria lamp into a power socket. A green light will illuminate on the LED light to indicate that all parts are working.Connect the USB cable to the USB adapter plug.
- Remove the plastic from the backside of the Mr Maria Remote to make it ready to use.
- Make it shine! Use the button to switch the lamp on. Read more about the controls on the right.
CONTROLS
ON/OFF – Use button
DIM – Use button (+) and (-) to make the light dimmer or brighter
respectively.
- Button The light will gradually turn on within 15 minutes.
- Button The light fades out in 5 minutes.
- Button The light fades out in 15 minutes.
- Button The light fades out in 30 minutes.
WARRANTY
There’s a 24-month warranty on your Mr Maria design*. Please contact our customer service if you have any questions. Find us at www.mrmaria.com. valid when the design is used correctly as described in this manual.
WARNING
- The product is not a toy and must be used under the supervision of an adult at all times.
- The product contains particles. Make sure they are correctly attached and keep it away from children.
- The remote control contains a small battery. Make sure the battery cover is properly closed and secured with the screw. The remote control is not a toy and should be kept away from children at all times.
- This lamp should be used indoors and is not waterproof. Do not immerse in water.
- When cleaning the article always disconnect the adapter from the power socket. Clean the product with a duster or with a damp cloth.
- Do not use an USB cable or adapter other than the one supplied.
- Keep the packaging out of reach of children.
- In case of malfunction, do not disassemble the LED module itself.
- When replacing the light source: follow the manufacturer’s instructions and use only original parts. For replacement, always first remove the adapter from the socket and the cable from the LED light source.
- Save this manual for later reference.
Caution! The Mr Maria light object is NOT a toy. For proper and safe use we ask you to read the following instructions before installation and use of the product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>