PUTCO 581002I Jeep Gladiator Element Sky View Instruction Manual
- June 13, 2024
- PUTCO
Table of Contents
PUTCO 581002I Jeep Gladiator Element Sky View
Product Information
The Element Sky View is a high-quality roof panel designed for installation on vehicles. It provides an enhanced view of the sky while maintaining the structural integrity of the vehicle.
Contents:
- Element Sky View Roof Panel
- M8 Bolt – Quantity: 4
- M8 Washer – Quantity: 4
Tools Needed:
- 6mm Hex Key – Quantity: 1
Product Usage Instructions
Installation Instructions:
-
Remove the front section of the factory hard top.
-
Place the Element Sky View panel on the top of the vehicle.
Installation Instructions Continued: -
Close the two front clamps. Then close the two front L-shaped clamps.
-
Close the rear two L-shaped clamps.
-
Loosely thread the four M8 bolts into the adapter plates.
-
Tighten the M8 bolts leaving a small gap between the Skyview hardware and the roll bar on the vehicle. Do not overtighten.
Your new Element Sky View Roof is now successfully installed on your vehicle!
Element Sky View Roof Panel Care Instructions
To keep your Element Sky View roof panel in optimal condition, please follow these care instructions:
- Avoid using abrasive materials or harsh chemicals that can scratch the Element Sky View roof panel.
- When washing your vehicle, do not use brushes in a regular car wash as they can scratch the Element Sky View roof panel.
ELEMENT SKY VIEW
INSTALLATION INSTRUCTIONS
Congratulations on your purchase of a high quality PUTCO product. Should you
need any application or technical assistance, feel free to call us at:
1-800-247-3974
Monday-Friday 8:00 a.m. – 5:00 p.m. (Central Standard Time)
Contact your PUTCO dealer for other quality accessories.
Please read all instructions before installation and to check to see that all parts are included.
CONTENTS
CONTENTS:
Description| Qty.
Element Sky View Roof Panel| 1
M8 Bolt| 4
M8 Washer| 4
Tools Needed:
- 6mm Hex Key
Installation Instructions
- Remove the front section of the factory hard top.
- Place the Element Sky View panel on the top of the vehicle.
- Close the two front clamps,. Then close the two front L-shaped clamps.
- Close the rear two L-shaped clamps. (picture pointing to the rear clamps)
- Loosely thread the four M8 bolts into the adapter plates.
- Tighten the M8 bolts leaving a small gap between the Skyview hardware and the roll bar on the vehicle.
Do not overtighten.
Your new Element Sky View Roof is now successfully installed on your vehicle!
ELEMENT SKY VIEW
ROOF PANEL CARE INSTRUCTIONS
- Do NOT use chemicals or abrasives on the clear roof panel.
- Use only water and wipe GENTLY with a microfiber towel for cleaning. Applying too much pressure can scratch the Element Sky View roof panel.
- When taking the Element Sky View roof panel through a car wash, use only a TOUCHLESS car wash. The brushes in a regular car wash can scratch the Element Sky View roof panel.
