PUTCO ELS-1-24-23 Element Sky View Instruction Manual
- June 13, 2024
- PUTCO
Table of Contents
PUTCO ELS-1-24-23 Element Sky View Instruction Manual
INSTALLATION INSTRUCTIONS
Congratulations on your purchase of a high quality PUTCO product. Should you need any application or technical assistance, feel free to call us at: 1-800-247-3974 Monday-Friday 8:00 a.m. – 5:00 p.m. (Central Standard Time) Contact your PUTCO dealer for other quality accessories.
Please read all instructions before installation and to check to see that all parts are included.
No Tools Needed!
| Description | Qty. |
|---|---|
| Element Sky View Panel | 1 |
| Foam Weather Seal | 2 |
| Velcro Strip | 2 |
Installation Instructions:
-
Remove the front section of the factory hard top.
-
Remove the Velcro strip from the foam seal and attach to the vehicle above the door frame.
-
Attach the foam seal to the Velcro on the vehicle.
-
Place the Sky View roof panel on the vehicle
-
Turn the front wing latches then close the two front clamps.
-
Turn the Rear wing clamps starting with the center two clamps
Your new Element Sky View is now successfully installed on your vehicle!
ROOF PANEL CARE INSTRUCTIONS
- Do NOT use chemicals or abrasives on the clear roof panel.
- Use only water and wipe GENTLY with a microfiber towel for cleaning. Applying too much pressure can scratch the Element Sky View roof panel.
- When taking the Element Sky View roof panel through a car wash, use only a TOUCHLESS car wash. The brushes in a regular car wash can scratch the Element Sky View roof panel.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>