anko 42778912 Solar Powered 24 LED White String Lights User Manual
- June 4, 2024
- Anko
Table of Contents
anko 42778912 Solar Powered 24 LED White String Lights
Assemble :
- Remove the film on the solar panel
- Turn the ON/OFF switch to “ON” position. You will only need to do this once, as the solar panel will turn the lights on and off automatically.
- Clip the solar panel in a spot that is exposed to sunlight. Direct sunlight will yield the best results.
Specification:
- White LED
- 2V/30mA Solar Panel
- 1x AAA Ni-Cd Rechargeable Battery 1.2V, 150mAh
IMPORTANT:
- Charge battery for at least 8 hours before first use.
- The solar light panel MUST be placed in a well-lit location for maximum sunlight. Anything that shades the panel will affect the brightness and lighting duration
- Put the switch on the “OFF” position when not in use or in storage.
- Use a damp cloth to clean it when there is a buildup of dust and/or dirt on the surface of the solar panel.
Battery Replacement
The battery is non-replaceable. DO NOT attempt to replace it.
Bulb Changing
The light set is constructed with non-replaceable bulbs. DO NOT attempt to
replace any of the bulbs in the light set.
WARNING : FOR DECORATION ONLY. THIS IS NOT A TOY. DO NOT ALLOW CHILDREN TO PLAY WITH AND HANDLE LIGHT SETS.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>