GOLD NOTE A6 EVO II Loudspeakers User Manual

: June 13, 2024
: GOLD NOTE

GOLD NOTE A6 EVO II Loudspeakers

Product Information

Gold Note A6 EVO II

Thank you for purchasing the Gold Note A6 EVO II. Welcome to the Gold Note world, where we turn High-End audio and music into a new experience. The A6 EVO II is a premium audio unit designed to provide exceptional sound quality and performance.

Founder: Maurizio Aterini

Important Safety Information

Do not disassemble any part of the product.
Do not use any part of the product for other purposes.
For service and problems, contact qualified Gold Note personnel.
Protect the product from rain, humidity, and heat sources.
Use the supplied power cord only with this unit.
Gold Note is not responsible for any improper use of this unit.

Generic Information:

Read and store these instructions.
Heed all warnings.
Follow the instructions provided.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block ventilation openings and install according to the manufacturer’s instructions.
Avoid installing near heat sources or other apparatus that produces heat.
Do not defeat the safety purpose of the polarized or grounding-type plug.
Consult an electrician if the provided plug does not fit your outlet.
Use only specified attachments/accessories.
Use with specified cart, stand, tripod, bracket, or table.
Use caution when moving the cart/apparatus combination to avoid tip-over injuries.
Unplug during lightning storms or when unused for long periods.
Refer servicing to qualified personnel if the apparatus has been damaged or does not operate normally.

Product Registration:

Please record the model and serial number located on the rear panel of the appliance and retain them for your records.

Waste Management:
GOLD NOTE – Information on the correct management of waste from household equipment pursuant to the European Directive 2012/19/EU.

Index:
INTRODUCTION AND FEATURES TECHNICAL SPECIFICATIONS ASSEMBLING THE STAND CONNECTING THE LOUDSPEAKERS POSITIONING THE LOUDSPEAKERS LOUDSPEAKERS SETUPPRODUCT REGISTRATION TROUBLESHOOTING RELATED PRODUCTS

Product Usage Instructions

Assembling the Stand:
Follow the instructions provided in the manual for assembling the stand. Ensure all components are securely fastened before placing the unit on the stand.

Connecting the Loudspeakers:
Refer to the manual for detailed instructions on how to connect the loudspeakers to the A6 EVO II. Use high-quality speaker cables and ensure proper polarity for optimal performance.

Positioning the Loudspeakers:
Follow the guidelines in the manual to position the loudspeakers in your listening environment. Experiment with placement to achiev the best soundstage and imaging.

Loudspeakers Setup:
Refer to the manual for instructions on how to set up and configure the loudspeakers. Adjust settings such as crossover frequency, volume, and equalization to suit your preferences.

Troubleshooting:
If you encounter any issues with the A6 EVO II, consult the troubleshooting section in the manual for possible solutions. If the problem persists, contact qualified Gold Note personnel for assistance.

Related Products:
Explore other Gold Note products that complement the A6 EVO II for a complete audio system experience. Refer to the manual for recommendations and compatibility information.

Thank you for purchasing one of our units and welcome into the Gold Note world, where we turn High-End audio and music into a new experience.
Maurizio Aterini,
founder of Gold Note

IMPORTANT SAFETY INFORMATIONS

PLEASE NOTE

Do not disassemble any part of the product.
Do not use any part of the product for other purposes.
For service and problems of any kind, contact qualified Gold Note personnel.
Protect the product from rain, humidity and keep away from heat sources, electric and electronic motors etc. The power cord supplied must be used only on this unit.
Gold Note does not have responsibility for any improper use of this unit.

GENERIC INFORMATION

Read these instructions and store them.
Heed all warnings.
Follow the instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block the ventilation openings and install in accordance with the manufacturer’s instructions.
Do not install near heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarised or grounding-type plug: a polarised plug hastwo blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet. or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod,bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel only. Servicing is required when the apparatus has been damaged in any way (such as when the power cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture) and in any case when the apparatus does not operate normally or has been dropped.

This appliance has a serial number located on the rear panel.
Please record the model and serial number and retain them for your records.

MODEL
SERIAL NUMBER

CAUTION!
To reduce the risk of electric shock, do not remove cover (or back). No user- serviceable parts inside. Refer only to qualified Gold Note service personnel for service.

WARNING!
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

GOLD NOTE – Information on the correct management of waste from household Equipment pursuant to the European Directive 2012/19/EU
The crossed-out wheelie bin symbol shown on the equipment or its packaging indicates that the product, at the end of its useful life, must be collected separately from other waste to allow its proper treatment and recycling. The user must therefore deliver, free of charge, the end-of-life equipment to the centres for the separate collection of waste electrical and electronic equipment, or return it to the dealer in accordance with the procedures established by the legislation.
The appropriate separate collection of discarded equipment allows for proper recycling, treatment and environmentally compatible disposal, helping to avoid the possible dispersion of hazardous substances and negative effects on the environment and health, favouring
the reuse and/or recycling of the materials of which the equipment is composed of. Illegal dumping of the product by the user involves the application of administrative sanction provided for by the legislation in force. We invite you consult the current legislation and the measures adopted by the public service operating in your country or territory.

PACKAGE CONTENT

2x A6 EVO II
2x LOUDSPEAKER GRILLES
1x USER MANUAL
1x ALLEN KEY
12x M4x25mm SCREWS with washers
8x SPIKE FEET
8x SPIKE PADS

INTRODUCTION AND FEATURES

The A6 EVO II is a three-way floor-standing loudspeaker with rear bass reflex design featuring a 6” internal sub-woofer, 2 x 5.5” mid-woofers and a 1.1” dome tweeter in silk. This compact but extremely powerful loudspeaker provides a naturally smooth sound, complemented by the distinctive beauty of the unique diamond design.

From the cabinet to the drivers, this loudspeaker is entirely made in Italy by local suppliers and craftsmen to deliver the highest quality in terms of sound, design and materials. The crossover is developed with audio-grade components to match the unique characteristics of the drivers and deliver exceptionally powerful responses across the entire frequency spectrum, achieving a most natural and dynamic sound.

The drivers are supported by extra-rigid flanges in aluminum and the silk dome ensures ultra-clean high frequencies with a noteworthy extension thanks to its powerful magnet. A premium material such as aluminium is used to support the drivers and for the rear reflex ports.

To provide an exceptionally fast transient response and retain its natural sound quality, the two mid-bass drivers have a 12dB/Octave set up at 2000Hz/70Hz range. An internal 6” subwoofer is located in a dedicated sealed chamber in the lower part of the cabinet, featuring a dedicated crossover network and bass reflex port facing downwards for perfect control over the lower frequencies down to 40Hz. The custom 1” silk dome tweeter is fine-tuned to match the cabinet shape and size, delivering crystal clear high frequencies.

To increase the rigidity of the structure, the cabinet is made of hardened HDF and reinforced with beautiful side panels featuring our exclusive diamond design. Luxurious finishes are used for the cabinet and the side panels, a statement of true Italian craftsmanship. The A6 EVO II combines elegance, performance and audio pleasure in unconventional ways to satisfy even the most demanding audiophiles.

TECHNICAL SPECIFICATIONS

MAIN FEATURES

3-way design with rear bass reflex port
Frequency response:
40-20000Hz ±3dB
Sensitivity:
88dB SPL 2,83V/1m
Nominal Impedance:
4Ω
Tweeter:
1.1” dome driver
Mid-woofer:
5,5” cone driver
Sub-woofer:
6” internal cone driver
Suggested power amplifier:
min. 20W
Max power handling:
150W RMS
Crossover:
70Hz and 2000Hz @ 12dB/Oct.
Connectors:
Gold Note gold plated nickel-free

DIMENSIONS AND WEIGHT

Dimensions:
230mm W x 1080mm H x 285mm D
Stand: 288mm W | 44mm H | 441mm D

Weight:

Kg. 60/pr. net
Kg. 80/pr. boxed

KEY FEATURES

6” cone sub-woofer
2x 5.5” cone mid-woofer
1.1” silk dome tweeter
2x aluminium rear bass reflex ports

ASSEMBLING THE STAND

STEP 1
Carefully place the loudspeaker upside down or alternatively lay it horizontally on a table to assemble the stand, covering the supporting surface with a soft cloth to avoid scratches and other damages to the cabinet. To lift the loudspeaker, you can use the bass reflex port as a lifting point but pay

attention to avoid damaging the drivers.

STEP 2
Insert the spike feet into the 4 holes on the base as shown in the picture below and tighten them firmly to lock them in place.

STEP 3
Insert the M4x25 screws into the 6 holes on the base and firmly tighten them to join the base.

STEP 4
Turn the loudspeaker upside down to place the base on the ground ensuring the spike feet sit on the spike pads to prevent damages to the floor.

IMPORTANT
Please pay attention to the screws and ensure you are using the correct type for each step.

$GOLD-NOTE-A6-EVO-II-Loudspeakers-FIG- $1$$

CONNECTING THE LOUDSPEAKERS

EXAMPLE CONNECTION

$GOLD-NOTE-A6-EVO-II-Loudspeakers-FIG- $2$$

POSITIONING THE LOUDSPEAKERS

The dimensions of your listening room don’t have as much of an effect on the audio quality as the position of the loudspeakers so we recommend placing them carefully. The better the positioning, the better the focus and the sound stage will be.
Managing reflective surfaces is a key factor to get the best out of your loudspeakers, especially because the sound waves carry enough energy to bounce off surfaces twice, affecting the sound performance of the system greatly.
Depending on the size of the room and the materials, the first reflection can create a 25m/s delay disturbing the sound. Reflections creating delays between 40 and 80m/s are less important as they contribute to creating the so-called ambience. Therefore it is very important to mitigate reflections resulting in 25m/s delays.
We recommend placing the loudspeakers as far as possible from the sidewalls and covering the floor in front of them with carpets if possible. Ensuring the loudspeakers are located at the same distance from the walls to the sides as the one at the back (symmetrical layout) can be highly beneficial.

WALL MATERIAL
Thick walls provide good control over the bass extension as well as acoustic insulation. Dry and thin walls can vibrate, therefore they are usually to be avoided or treated accordingly.

CEILING
High ceilings tend to offer better results, with an ideal constant height of 2,50m to 3,60m. Vaulted ceilings can be difficult to deal with as they act as a magnifier lens for specific frequencies.
If the ceiling is not flat but at an angle, we recommend to position the loudspeakers closer to the side where the ceiling is lower while the listening point should be where the ceiling is higher.

FLOOR
Marble and hard-stone floors are difficult to manage due to the reflections they create. Carpeted floors can also prove difficult because of how they absorb the sound waves. Wooden floors tend to perform well in most cases.
In any case, floors can be easily treated with a 2/4cm thick carpet placed in front of the loudspeakers.

SIDE WALLS
You should avoid naked side walls around the system as well as hanging carpets. Hanging objects, such as framed pictures and paintings, are usually okay if they come without glass protections and are located symmetrically on both sides of the loudspeakers. Treating the walls with wall sound traps and diffusers tends to give the best results.

REAR WALL
The rear wall is generally to be treated as the sidewalls, taking measures to facilitate sound diffraction using sound traps or diffusers (such as bookshelves, bookcases and record racks).

OPPOSITE WALL
If your listening room is small in size and the system is too close to the opposite wall, it’s worth considering treating the wall with thick curtains or other diffusers.

WINDOWS AND DOORS
Windows and doors will most likely produce vibrations when the music is playing. It’s best to avoid rooms with windows, doors and other glass surfaces in corners or at the center of the side walls. If that’s not possible, treatment should be applied to prevent overwhelming reflections. If using curtains, it’s recommended to opt for lighter materials to allow some of the sound waves to travel through it and bounce off the surface.

FURNITURE
Avoid furniture with a large quantity of glass and/or doors and drawers. Open shelf furniture usually works quite well. If possible, avoid placing racks and flat surfaces between the loudspeakers and the listening point as they might reflect heavily the high and mid-frequencies.

AUDIO RACKS
Audio racks are greatly influenced by their design and the material used so, depending on these factors, it might be best to place them between the speakers or to the side of the system. The Gold Note Galileo rack features a special curved design to effectively diffracting the sound waves and can therefore be placed between the loudspeakers.
SUBWOOFER
Subwoofers generate sound waves that behave similarly to the waves created by the loudspeakers so they should be placed keeping in mind the principles listed here.

LOUDSPEAKERS SETUP

If possible, try to follow these rules to place the loudspeakers in their initial setup. From here, you can then perform listening tests to fine-tune the position of each loudspeaker and improve the focus and soundstage perceived from the listening point.

The distance between the loudspeakers and the listening point should be approximately the same as shown in the picture below. In the same way, the distance between each loudspeaker and the closer sidewall should be approximately the same as the distance between them and the back wall.

If this is not possible, then it’s crucially important to adjust the position and angle of the loudspeaker to find the preferred balance between a wide soundstage and focussed sharp details.

$GOLD-NOTE-A6-EVO-II-Loudspeakers-FIG- $3$$

PRODUCT REGISTRATION

PRODUCT REGISTRATION
We recommend to register the unit on our internet website within 15 days from the purchase at www.goldnote.it/product-registration
If the unit is not registered correctly or has been purchased from a different country of the purchaser home address the unit will not be covered by any warranty and the registration will be refused.
Please note that the warranty does not cover in any case: Tubes, Phono Cartridge Stylus and Batteries.

www.goldnote.it/productregistration

WARNING
Gold Note products should only be opened, serviced and inspected by certified Gold Note technicians and dealers. Work performed by unqualified personnel may cause serious damage or personal injury.
Opening of the product by non-authorised personnel will void the guarantee.
In this case, contact your dealer to be advised on how the fault can be solved.
Do not return any object directly to the factory or to the distributor without being authorised to do so.

WARRANTY

All Gold Note products come with a warranty against defective materials and workmanship.
Any service and inspection must be carried out by a Gold Note dealer or distributor so in case you need any assistance with this product, please contact the seller.

PLEASE NOTE
Descriptions and technical characteristics may vary at any time and without notice.

TROUBLESHOOTING

GOLD-NOTE-A6-EVO-II-Loudspeakers-FIG-5

CLEANING THE UNIT
With EXTREME care use ONLY water or detergents for delicate surfaces with a very soft cloth to sweep dust and remove stains.
Any acid or not extremely soft cloth will irreversibly damage the unit. Do not use alcohol.

INTEGRATED AMPLIFIER

IS-1000
Class-A/B streaming integrated amplifier delivering 125Watt @ 8Ω per ch. with High-Current Mosfet technology. Features UPnP streamer, BurrBrown PCM1796 DAC, MM/MC phono stage.
POWER AMPLIFIER
PA-1175 MKII
Class-A/B power amplifier with variable Damping Factor technology for a perfect match with all types of loudspeakers.

Discover more on our website www.goldnote.it

Designed and handmade in Firenze, Italy
www.goldnote.it
copyright ©2023 Akamai S.r.l. All rights reserved