GOLD NOTE A3 EVO II Two-Way Bookshelf Speaker with Rear Bass Reflex User Manual
- June 6, 2024
- GOLD NOTE
Table of Contents
- GOLD NOTE A3 EVO II Two-Way Bookshelf Speaker with Rear Bass Reflex User
- IMPORTANT SAFETY INFORMATION
- GENERIC INFORMATION
- SERIAL NUMBER
- CAUTION!
- PACKAGE CONTENT
- A3 EVO II STAND PACKAGE CONTENT (optional)
- INTRODUCTION AND FEATURES
- MAIN FEATURES
- DIMENSIONS AND WEIGHT
- UPGRADE
- KEY FEATURES
- ASSEMBLING THE STAND
- CONNECTING THE LOUDSPEAKERS
- POSITIONING THE LOUDSPEAKERS
- WALL MATERIAL
- CEILING
- FLOOR
- SIDE WALLS
- REAR WALL
- OPPOSITE WALL
- WINDOWS AND DOORS
- FURNITURE
- AUDIO RACKS
- SUBWOOFER
- LOUDSPEAKERS SETUP
- PRODUCT REGISTRATION
- WARNING
- WARRANTY
- PLEASE NOTE
- TROUBLESHOOTING
- CLEANING THE UNIT
- RELATED PRODUCTS
- POWER AMPLIFIER
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GOLD NOTE A3 EVO II Two-Way Bookshelf Speaker with Rear Bass Reflex User
Manual
IMPORTANT SAFETY INFORMATION
PLEASE NOTE
- Do not disassemble any part of the product.
- Do not use any part of the product for other purposes.
- For service and problems of any kind, contact qualified Gold Note personnel.
- Protect the product from rain, humidity and keep away from heat sources, electric and electronic motors etc. The power cord supplied must be used only on this unit.
- Gold Note does not have responsibility for any improper use of this unit.
GENERIC INFORMATION
| Read these instructions and store them.
| Heed all warnings.
| Follow the instructions.
| Do not use this apparatus near water.
| Clean only with a dry cloth.
| Do not block the ventilation openings and install in accordance with the
manufacturer’s instructions.
| Do not install near heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
| Do not defeat the safety purpose of the polarised or grounding-type plug: a
polarised plug hastwo blades with one wider than the other.
| A grounding type plug has two blades and a third grounding prong. The wide
blade or.
the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet. or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
| Only use attachments/accessories specified by the manufacturer.
| Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
| Unplug this apparatus during lightning storms or when unused for long
periods of time. Refer all servicing to qualified service personnel only.
Servicing is required when the apparatus has been damaged in any way (such as
when the power cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or
moisture) and in any case when the apparatus does not operate normally or has
been dropped.
This appliance has a serial number located on the rear panel.
Please record the model and serial number and retain them for your records.
SERIAL NUMBER
CAUTION!
To reduce the risk of electric shock, do not remove cover (or back). No user-
serviceable parts inside. Refer only to qualified Gold
Note service personnel for service.
WARNING!
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
GOLD NOTE – Information on the correct management of waste from
household Equipment pursuant to the European Directive 2012/19/EU
The crossed-out wheelie bin symbol shown on the equipment or its packaging
indicates that the product, at the end of its useful life, must be collected
separately from other waste to allow its proper treatment and recycling. The
user must therefore deliver, free of charge, the end-of-life equipment to the
centres for the separate collection of waste electrical and electronic
equipment, or return it to the dealer in accordance with the procedures
established by the legislation.
The appropriate separate collection of discarded equipment allows for proper
recycling, treatment and environmentally compatible disposal, helping to avoid
the possible dispersion of hazardous substances and negative effects on the
environment and health, favouring the reuse and/or recycling of the materials
of which the equipment is composed of. Illegal dumping of the product by the
user involves the application of administrative sanction provided for by the
legislation in force.
We invite you consult the current legislation and the measures adopted by the
public service operating in your country or territory.
PACKAGE CONTENT
A3 EVO II STAND PACKAGE CONTENT (optional)
INTRODUCTION AND FEATURES
The A3 EVO II is a two-way bookshelf speaker with rear bass reflex design
featuring a 6” mid-woofer and a 1.1” dome tweeter in silk. This compact but
extremely powerful loudspeaker provides a naturally smooth sound, complemented
by the distinctive beauty of the unique diamond design.
From the cabinet to the drivers, this speaker is entirely made in Italy by
local suppliers and craftsmen to deliver the highest quality in terms of
sound, design and materials. The crossover is developed with audio-grade
components to match the unique characteristics of the drivers and deliver
exceptionally powerful responses across the entire frequency spectrum,
achieving a most natural and dynamic sound.
The drivers are supported by extra-rigid flanges in aluminum and the silk dome
ensures ultra-clean high frequencies with a noteworthy extension thanks to its
powerful magnet. A premium material such as aluminium is used to support the
drivers and for the rear reflex port.
To increase the rigidity of the structure, the cabinet is made of hardened HDF
and reinforced with beautiful side panels featuring our exclusive diamond
design. Luxurious finishes are used for the cabinet and the side panels, a
statement of true Italian craftsmanship.
The A3 EVO II is a perfect companion for our electronics, especially when
paired with the DS-10 Plus Streaming DAC and the PA-10 power amplifier – a
contemporary High-End system that’s compact in size but delivers unbeatable
audio quality. And if you love vinyl, simply add a turntable like Pianosa and
the PH-10 phono stage.
The A3 EVO II combines elegance, performance and audio pleasure in
unconventional ways to satisfy even the most demanding audiophiles.
MAIN FEATURES
| 2-way design with rear bass reflex port
| Frequency response: 45-20000Hz ±3dB
| Sensitivity: 87dB SPL 2,83V/1m
| Nominal Impedance: 6Ω
| Tweeter: 1.1” dome driver
| Mid-woofer: 6” cone driver
| Suggested power amplifier: min. 10W
| Max power handling: 100W RMS
| Crossover: 2000Hz at 12dB/Oct.
| Connectors: Gold Note gold plated nickel-free
DIMENSIONS AND WEIGHT
Dimensions: 240mm W x 350mm H x 295mm D Stand: 291mm W | 742mm H | 441mm D
Weight: Kg. 20/pr. net Kg. 25/pr. boxed.
UPGRADE
Dedicated stand
KEY FEATURES
| 6” cone mid-woofer
| 1.1” silk dome tweeter
| Aluminium rear bass reflex port
ASSEMBLING THE STAND
STEP 1
Place the column vertically on a soft cloth. Turn the base upside down and place it over the topside of the column aligning the central holes on the base with those on the column. Insert the M4x35 screws into the four central holes and firmly tighten them to join the base to the column.
STEP 2
Insert the spike feet into the four holes on the base as shown into picture 2, tighten them firmly to lock them in place.
STEP 3
Turn the assembly upside down to place the base on the ground ensuring the spike feet sit on the spike pads to prevent damages to the floor. Place the shelf on the column, the Gold Note logo should be facing upwards and marks the front-facing side of the stand. Insert the M4x20 screws into the four holes and firmly tighten them to join the shelf to the column.
STEP 4
Use the shelf caps to cover the head of the screws.
IMPORTANT
Please pay attention to the screws and ensure you are using the correct type for each step.
CONNECTING THE LOUDSPEAKERS
EXAMPLE CONNECTION
POSITIONING THE LOUDSPEAKERS
The dimensions of your listening room don’t have as much of an effect on the
audio quality as the position of the loudspeakers so we recommend to place
them carefully. The better the positioning, the better the focus and the sound
stage will be.
Managing reflective surfaces is a key factor to get the best out of your
loudspeakers, especially because the sound waves carry enough energy to bounce
off surfaces twice, affecting the sound performance of the system greatly.
Depending on the size of the room and the materials, the first reflection can
create a 25m/s delay disturbing the sound. Reflections creating delays between
40 and 80m/s are less important as they contribute to creating the so called
ambience. Therefore it is very important to mitigate reflections resulting in
25m/s delays.
We recommend to place the loudspeakers as far as possible from the side walls
and to cover the floor area in front of them with carpets if possible.
Ensuring the loudspeakers are located at the same distance from the walls to
the sides as the one at the back (symmetrical layout) can be highly
beneficial.
WALL MATERIAL
Thick walls provide good control over the bass extension as well as acoustic insulation. Dry and thin walls can vibrate, therefore they are usually to be avoided or treated accordingly.
CEILING
High ceilings tend to offer better results, with an ideal constant height of
2,50m to 3,60m. Vaulted ceilings can be difficult to deal with as they act as
a magnifier lens for specific frequencies.
If the ceiling is not flat but at an angle, we recommend to position the
loudspeakers closer to the side where the ceiling is lower while the listening
point should be where the ceiling is higher.
FLOOR
Marble and hard-stone floors are difficult to manage due to the reflections they create. Carpeted floors can also prove difficult because of how they absorb the sound waves. Wooden floors tend to perform well in most cases. In any case, floors can be easily treated with a 2/4cm thick carpet placed in front of the loudspeakers.
SIDE WALLS
You should avoid naked side walls around the system as well as hanging carpets. Hanging objects, such as framed pictures and paintings, are usually okay if they come without glass protections and are located symmetrically on both sides of the loudspeakers. Treating the walls with wall sound traps and diffusers tends to give the best results.
REAR WALL
The rear wall is generally to be treated as the side walls, taking measures to facilitate sound diffraction using sound traps or diffusors (such as a bookshelves, bookcases and record racks).
OPPOSITE WALL
If your listening room is small in size and the system is too close to the opposite wall, it’s worth considering treating the wall with thick curtains or other diffusors.
WINDOWS AND DOORS
Windows and doors will most likely produce vibrations when the music is playing. It’s best to avoid rooms with windows, doors and other glass surfaces in corners or at the center of the side walls. If that’s not possible, treatment should be applied to prevent overwhelming reflections. If using curtains, it’s recommended to opt for lighter materials to allow some of the sound waves to travel through it and bounce off the surface.
FURNITURE
Avoid furniture with large quantity of glass and/or doors and drawers. Open shelf furniture usually work quite well. If possible, avoid placing racks and flat surfaces between the loudspeakers and the listening point as they might reflect heavily the high and mid-frequencies.
AUDIO RACKS
Audio racks are greatly influenced by their design and the material used so, depending on these factors, it might be best to place them between the loudspeakers or to the side of the system. The Gold Note Galileo rack features a special curved design to effectively diffracting the sound waves and can therefore be placed between the loudspeakers.
SUBWOOFER
Subwoofers generate sound waves that behave similarly to the waves created by the loudspeakers so they should be placed keeping in mind the principles listed here.
LOUDSPEAKERS SETUP
If possible, try to follow these rules to place the loudspeakers in their
initial setup. From here, you can then perform listening tests to fine tune
the position of each loudspeaker and improve the focus and soundstage
perceived from the listening point.
The distance between the loudspeakers and the listening point should be
approximately the same as shown in the picture below. In the same way, the
distance between each loudspeaker and the closer side wall should be
approximately the same as the distance between them and the back wall.
If this is not possible, then it’s crucially important to adjust the position
and angle of the loudspeaker to find the preferred balance between a wide
soundstage and focussed sharp details.
PRODUCT REGISTRATION
PRODUCT REGISTRATION
We recommend to register the unit on our internet website within 15 days from
the purchase at www.goldnote.it/product-registration
If the unit is not registered correctly or has been purchased from a different
country of the purchaser home address the unit will
not be covered by any warranty and the registration will be refused. Please
note that the warranty does not cover in any case: Tubes, Phono Cartridge
Stylus and Batteries.
WARNING
Gold Note products should only be opened, serviced and inspected by certified
Gold Note technicians and dealers. Work performed by unqualified personnel may
cause serious damage or personal injury.
Opening of the product by non-authorised personnel will void the guarantee. In
this case, contact your dealer to be advised on how the fault can be solved.
Do not return any object directly to the factory or to the distributor without
being authorised to do so.
WARRANTY
All Gold Note products come with a warranty against defective materials and
workmanship.
Any service and inspection must be carried out by a Gold Note dealer or
distributor so in case you need any assistance with this product, please
contact the seller.
PLEASE NOTE
Descriptions and technical characteristics may vary at any time and without notice.
TROUBLESHOOTING
CLEANING THE UNIT
With EXTREME care use ONLY water or detergents for delicate surfaces with a
very soft cloth to sweep dust and remove stains.
Any acid or not extremely soft cloth will irreversibly damage the unit. Do not
use alcohol.
RELATED PRODUCTS
INTEGRATED AMPLIFIER IS-1000
Class-A/B streaming integrated amplifier delivering 125Watt @ 8Ω per ch. with
High-
Current Mosfet technology. Features UPnP streamer, BurrBrown PCM1796 DAC, MM/
MC phono stage.
POWER AMPLIFIER
| PA-10 Gold Note’s newest power amplifier of the smaller but not less efficient product range called Series 10.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>