Curtis 13498 Class 3 Round Hitch Receiver Instruction Manual
- June 13, 2024
- Curtis
Table of Contents
INSTALLATION MANUAL
13498
13498 Class 3 Round Hitch Receiver
WARNING
Never exceed the vehicle manufacturer’s recommended towing capacity.
Product Photo
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time
required.
This installation requires:
- May require lowering of exhaust
- Removal of recovery loop
Periodic inspection of the trailer hitch should be performed to ensure all
mounting hardware remains tight and structural components are secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
SAFETY INSTRUCTIONS
Safety glasses should be worn at all times while installing this product.
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get
copies of the product warranties, register your purchase or provide feedback,
visit: warranty.curtgroup.com/surveys
Level of Difficulty
Easy
Installation difficulty levels are based on time and effort involved and may
vary depending on the installer level of expertise, condition of the vehicle
and proper tools and equipment.
Weight Carrying Capacity
| Gross trailer weight (GTW) | 2,000 lbs. |
|---|---|
| Tongue weight (TW) | 200 lbs. |
Parts List
| Item | Qty | Description |
|---|---|---|
| 1 | 4 | Hex bolt, M12 |
| 2 | 4 | Conical-toothed washer, 1/2″ |
Tools Required
| Ratchet | Socket, 19mm |
|---|---|
| Socket, 12mm | Torque wrench |
| Socket, 17mm | — |
- For a tools reference guide visit curtmfg.com/trailer-hitch-installation
ASSEMBLY
| Item | Qty | Description |
|---|---|---|
| 1 | 4 | Hex bolt, M12 |
| 2 | 4 | Conical-toothed washer, 1/2″ |
CONICAL TOOTHED WASHER ORIENTATION
Step 1
Using a 12mm socket, remove the two bolts securing the muffler hanger bracket
from the frame on both sides of vehicle. Unhook the exhaust hanger isolator in
front of the muffler as well.
NOTICE
Make sure to support the exhaust to prevent damaging it.
Step 2
Use a 17mm socket to remove the two bolts securing the recovery loop to the
frame.
Return the recovery loop and fasteners to the vehicle owner.
Step 3
Remove the decals / plugs over the weldnuts on the inner side of the frame
rails. Raise hitch into position between the frame rails and loosely install
the supplied M12 bolts (#1) and conical-toothed washers (#2) with a 19mm
socket.
Step 4
Torque all M12 fasteners to 86 ft-lbs.
Step 5
Reinstall the exhaust hanger brackets and isolator removed in step 1.
Final Installed Image
TOWING BASICS & SAFETY INFORMATION
For information on safely towing your trailer, visit curtmfg.com /understanding-towing.
CURTMFG.COM
• PRODUCT SUPPORT: 877.287.8634
• 13498-INS-RA
• 01/18/2023
• ECN10466
References
- CURT: Trailer Hitches - Trailer Wiring - 5th Wheel - Gooseneck
- 8 Easy Steps - Trailer Hitch Installation How-To
- Towing Guide, How-tos, References & Glossary
- CURT: Trailer Hitches - Trailer Wiring - 5th Wheel - Gooseneck
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>