Aluratek ABH04F Bluetooth Wireless Stereo Headphones User Guide
- June 13, 2024
- Aluratek
Table of Contents
Bluetooth Wireless Stereo Headphones
Quick Start Guide
On Ear Controls
Operation
Charging the battery
The battery is not fully charged and it is highly recommended that you charge
ABH04F before you begin using it.
Note: Using ABH04F “out of the box” will not harm the device. You will
experience reduced battery life as the unit will not be fully charged.
Connect the larger USB end of the provided cable to your computer / power
adapter.
Connect the micro smaller micro USB end to the USB port of ABH04F. Please
charge the battery for a minimum of 6 hours. The Red LED will be on while
charging. When charging is complete, the red LED will turn Blue.
| Function | Operation | LED Indicator |
|---|---|---|
| Enter Pairing Mode | Ensure ABH04F is turned OFF. Press and hold button for 6 | |
| seconds. | Red and Blue LED flashes rapidly | |
| Power On / Off | Press and hold the button until the red LED flashes. | Red then |
Off
Note: The pairing mode will last 2 minutes. ABH04F will switch to the
standby mode automatically if no devices can be connected within 2 minutes.
Pairing with the transmitter such as iPhone, smartphone, and tablet:
The pairing procedure will vary depending on the actual device. Please refer
to the user guide of your device for detail instruction. The pairing
procedures are as follows:
- Make sure ABH04F is powered off.
- Activate ABH04F pairing mode by press and hold the button for 6 seconds. (Red and Blue LED will flash rapidly)
- Activate your device’s Bluetooth function and set your device to search for Bluetooth devices. Select ABH04F when it is found.
- For transmitter with Bluetooth version 2.1, you will not need to input a code. If you are prompted for PIN, please enter “0000”.
- If prompted by your device to connect, please select “Yes”.
- After connecting successfully, the blue LED will flash every 3 seconds.
Note: Please make sure the audio output is set to Bluetooth / ABH04F for audio streaming from the device.
Tech Support & Warranty Information
If you need further assistance, please contact the Laurate support department
for troubleshooting prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/support
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Laurate warrants this product against defect in material or workmanship for 1
Year from the date of purchase.
For more information, please visit: http://aluratek.com/warranty-return-
policy
You can register your product online at: http://aluratek.com/product-
registration
Radio and TV Interference Statement
WARNING!!! This equipment has been tested and found to comply with the
limits of a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by whatever measures may be required to correct
the interference.
ABH04F
qsg Q10328 Copyright © 2013 Aluratek, Inc.
All Rights Reserved.
aluratek.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>