BICONIC BC-AU-BS-249 Portable Bluetooth Speaker User Manual

: June 13, 2024
: BICONIC

Table of Contents

BICONIC BC-AU-BS-249 Portable Bluetooth Speaker
Product Information
Product Usage Instructions
Package includes
Precautions
Operating Panel
Operating Instructions
Bluetooth Connection
Specifications
Frequently Asked Questions
FCC Statement
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BICONIC BC-AU-BS-249 Portable Bluetooth Speaker

Product Information

Product Name	Bluetooth Speaker
Model	BC-AU-BS-249

Product Usage Instructions

Ensure that the Bluetooth speaker is charged and turned on.
On your mobile device or computer, enable Bluetooth and ensure it is discoverable.
Locate the Bluetooth settings on your device and search for available devices.
Select “BC-AU-BS-249” from the list of available devices.
If prompted, enter the pairing code “0000” or “1234” to connect the devices.
Once connected, you can play audio through the Bluetooth speaker.
Adjust the volume using the controls on your mobile device or computer.
To turn off the Bluetooth speaker, press and hold the power button until it powers down.

Notice
Thank you for your choosing our Bluetooth speaker.
Please read user manual carefully and keep it for your records.

Package includes

1 Wireless Speaker
1 Micro USB charging cable
1 User Manual

Precautions

Please store and use the product in room temperature environment.
Do not expose this product to rain or wet conditions.
Do not drop or bump this product.
Do not disassemble or repair the speaker yourself. Disassembling this product will invalidate the warranty.
Please use the power change with rated voltage for the speaker.
It may cause hearing damage if playing music in high volume for a long time. Consider avoiding excessively high volume when playing music for a long time.

Operating Panel

TF/SD Card Input Port
USB Input Port for U-Disk
Micro USB Charging Port
Button + , long press for volume up + ; short click for next song
Button Pause/Mode , long press for switching BT, FM mode; short click for pause/play.
Button Power/Light, long press for power ON/OFF; short click for changeable lights.
Button – , long press for volume down – ; short click for previous song

Operating Instructions

Answer Call: When receiving a call, click the Pause/Mode Button to answer the call.
Hang Up Call : When call ends, click the Pause/ Mode Button to hang up the phone.
PS: If you don’t want to answer an incoming call, double-click the Pause/Mode Button to reject the call.
Last Number Redial: While on standby or playing music, double-click the Pause/ Mode Button to dial the last number in your call log.
FM Function: The FM function works when the nicro USB charging cable is plugged in and used as an antenna. In FM mode, click the Pause/Mode Button to search for the radio, the blue lights will flash. After the search is complete, the blue lights will not flash any more. Then press button – for previous radio channel and button + for next radio channel.
TWS Function: Two speakers in Bluetooth mode; double-click one of the + buttons, there will be a voice prompt indicating the search for another device; in about 2-3 seconds two speakers will connect automatically with a voice prompt indicating that the TWS connection was successful.
PS: Make sure the two speakers aren’t connected to any phone device at that moment. Otherwise disconnect from the phone. TWS pairing is not Po disconnect the os tea, long press one of the + buttons.

Note

(A) Reboot: When the pairing is successful, Bluetooth speaker will automatically connect to your phone.
(B) Low Battery Prompt: When the Bluetooth speaker battery power is low, it will issue a low battery tone.
(C) Short click means press once, long press means press and hold the button for 2-3 seconds.

Bluetooth Connection

Once power is ON, blue lights will flash, indicating that the Bluetooth speaker is in search pairing state.
Turn on your device’s Bluetooth and scan for new devices, look for BC-BS-249. Once found, pair with it.
Affer pairing, devices can connect with each other automatically

Specifications

BT Version: JL 5.1
Output Power: 5 W
Lithium Battery: 400 mAh
Transmission Distance: 10 M
Sensitivity: ≤1%
SNR: ≥85dB
FM Radio: 87.5-108 MHz
DC/5V: Input DC 5V/300mA
Operating Voltage: DC 5V
Charging Time: 1-1.5 hours
Play Tim e: 2 hours around
Material: ABS Plastic + Fabric
Dimension: 110 110 93mm
Functions : Bluetooth,TF/SD card,USB,FM,RGB Lights,TWS

Frequently Asked Questions

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Cations to this device not explicitly approved by manufacturer could Caution
Any changes or modivoid your authority to operate this equipment. RF Exposure Information The device was evaluated to meet general RF exposure requirements. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.