BICONIC AUOH102 True Wireless Headphone User Manual

: August 10, 2024
: BICONIC

Table of Contents

ICONIC AUOH102 True Wireless Headphone
Package Contents
SPECIFICATION
Operation Guide
Function of Buttons
Getting Started
Bluetooth’ Functions
Troubleshooting
FCC STATEMENT
Warranty
FCC Warning
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ICONIC AUOH102 True Wireless Headphone

Package Contents

True Wireless Headphones
USB Charging Cable
Instruction Manual

SPECIFICATION

Bluetooth Version
- 5.4
Sound Output
- 3mW
Charge Time (hrs)
- 2h
Play Time (hrs)
- 9h
Weight:
- 220g
Included Accessories:
- Charging
- Cable
- User manual
Standby Time
- 51h
Operating Range
- 33ft
Music playing time
- 9h
Special features
- Dustproof and Sweatproof
Battery
- 200mAh
Input power
- 5V/1A
Charge connector
- TYPE-C

Operation Guide

Function of Buttons

Long press to power on/off; click to play/pause, answer/hang up call; double-click to redial
Long press to the next song; click to increase the volume
Long press to the previous song; click to decrease the volume

Getting Started

Before using this device, fully charge it. Charging instructions can be found on page 6.
Do not wear the headphones while setting up, the voice prompt is loud. Press and hold the Power button until the indicator LED flashes red and blue.

Pairing

Go to Bluetooth Settings on your mobile device.
Turn Bluetooth’ ON, on your device.
On your Bluetooth device, select “BC-OH-102” from the list of available devices.
When successfully paired, the indicator LED will turn off. You can now put on the headphones.

Bluetooth’ Functions

Long press the Power button to turn the headphones on or off.

Note: Once they are paired, the headphones will recognize your device, it is not necessary to set up the pairing again.

Short press the Next Track button to increase volume. Long press the button to the next track.
Short press the Play / Pause button to play or pause. Long press the button to power on or off. When a phone call is incomming, short press Play / Pause to answer, and long press to reject the incomming call. After a call, press the button two times to redial the last number called.
Short press the Previous Track button to the previous track to decrease, volume. Long press the button to skip.

Troubleshooting

Headphones do not pair with the device

Turn the headphones off.
Restart your device.
Turn the headphones on.
Try pairing again.

Headphone buttons do not work

Turn the headphones off, and then back on again. If any of these problems persist, the headphones may need to be charged. Charging instructions can be found on page 6. If charging and re-pairing do not solve the issue, you may have a defective device, please see the warranty information on page 9.

Charging

Connect the USB Type-C charging cable to the charging port on the bottom of the right earcup.
Plug the cable into a standard USB 5V/1A or higher power output. When the indicator LED light is Off, this means the headphones are fully charged and ready to use.
When fully charged, unplug the charging cable from the power source.

Warnings

Do not use this unit for anything other than its intended use.
Do not puncture, throw, drop, bend, or modify this product.
Do not throw this product into fire or water.
Do not short-circuit the battery with any metal or metallic objects.
Do not expose this product to corrosive liquids such as salt water.
Do not operate the unit if it has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit.
Do not allow children to play with this product as it is not a toy, and may present a choking hazard.
Avoid leaving your device in direct sunlight, such as on the dashboard, console, or seat of a vehicle.
Do not leave your device, or use your device, in any area where the temperature is likely to drop below 32° F, or may exceed 140° F, such as inside a closed vehicle on a hot day.
Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
Protect your hearing by always listening at a safe level. Prolonged use at elevated volumes may affect your hearing capacity and could result in hearing loss.
To avoid damage to the headphones, please only use a USB SV/lA or higher charger.
To ensure the battery life, charge normally at least once a month.

FCC STATEMENT

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

Warranty

Bytech NY INC. warrants this product to be materially free from defects and workmanship to the original purchaser for 12 months from the original purchase date. Bytech responsibility about this limited warranty shall be limited solely to repair or replacement at its option, of any product which fails during normal consumer use. This warranty does not extend to damage or failure that results from misuse, neglect, accident, alteration, abuse, improper installation, or maintenance. At any time during the 12 months following the purchase, if the product fails due to defects in material or workmanship, return the defective product (with freight prepaid) with proof of purchase.

Bytech NY Inc 2585 West 13street Brooklyn NY 11223 718-449-3700 www.bytechintl.com

RF exposure statement
This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to the radio. communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.