Shark WD200UK Series 3 in 1 Cleaner Cordless Instruction Manual
- June 13, 2024
- Shark
Table of Contents
- Shark WD200UK Series 3 in 1 Cleaner Cordless Instruction Manual
- IMPORTANT SAFETY INSTRUCTIONS
- ASSEMBLY
- LI-ION BATTERY
- USING YOUR 3-IN-1 CLEANER
- USING YOUR 3-IN-1 CLEANER
- USING YOUR 3-IN-1 CLEANER
- CLEANING MODES
- AREA RUG MODE
- MAINTAINING YOUR 3-IN-1 CLEANER
- MAINTAINING YOUR 3-IN-1 CLEANER
- LED GLOSSARY
- THREE (3) YEAR LIMITED WARRANTY
- What is not covered by this warranty?
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Shark WD200UK Series 3 in 1 Cleaner Cordless Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY READ ALL INSTRUCTIONS BEFORE USING THIS 3-IN-1 CLEANER
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
1. If the charging cord plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. DO NOT force
into outlet or try to modify to fit.
2. To reduce the risk of shock and unintended operation, turn off power
before servicing.
3. This 3-in-1 Cleaner consists of a motorized nozzle, main body, pole, and
handle. These components contain electrical connections, electrical wiring,
and moving parts that potentially present risk to the user.
4. Before each use, carefully inspect all parts for any damage. If a part is
damaged, discontinue use.
5. Use only identical replacement parts.
6. Use only as described in this manual.
DO NOT use the 3-in-1 Cleaner for any purpose other than those described in
this manual.
7. DO NOT immerse or spray water on the body of the 3-in-1 Cleaner. To clean
the surface, wipe with a dry cloth.
8. Keep the 3-in-1 Cleaner and the dock’s cord out of reach of children. Do
not allow the appliance to be used by children. Do not allow to be used as a
toy. Close supervision is necessary when used near children.
9. This appliance can be used by persons with reduced physical, sensory, or
mental capabilities or lack of experience or knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Cleaning and user maintenance shall not be
done by children.
10. DO NOT handle plug or 3-in-1 Cleaner with wet hands.
11. DO NOT use without the dirty water tank, Clean Solution Tank, filter,
brushroll, and brushroll cover in place.
12. Only use Shark® branded filters and accessories.
13. DO NOT put any objects into nozzle openings. DO NOT use with any opening
blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
14. DO NOT use if nozzle airflow is restricted. If the air paths or the
motorized floor nozzle become blocked, turn the 3-in-1 Cleaner off. Remove all
obstructions before you turn on the unit again.
15. Keep nozzle and all 3-in-1 Cleaner openings away from hair, face,
fingers, uncovered feet, or loose clothing.
16. DO NOT use if 3-in-1 Cleaner is not working as it should, or has been
dropped, damaged, left outdoors, or dropped into water.
17. Use extra care when cleaning on stairs.
18. DO NOT leave the 3-in-1 Cleaner unattended while powered on.
19. When using on carpet or flooring, always keep the 3-in-1 Cleaner moving
over the carpet surface or flooring to avoid damaging the carpet fibers or
flooring.
20. DO NOT place 3-in-1 Cleaner on unstable surfaces such as chairs or
tables.
21. DO NOT use to pick up:
a) Large objects
b) Hard or sharp objects (nails, screws, or coins)
c) Large quantities of dust (e.g., drywall dust).
d) Smoking or burning objects (hot coals, cigarette butts, or matches)
e) Flammable or combustible materials (lighter fluid, gasoline, or kerosene)
f) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
22. DO NOT use in the following areas:
a) Poorly lit areas
b) Outdoor areas
c) Spaces that are enclosed and may contain explosive or toxic fumes
or vapors (lighter fluid, gasoline, kerosene, paint, paint thinners,
mothproofing substances, or flammable dust)
23. Turn off the 3-in-1 Cleaner before any adjustment, cleaning, maintenance
or troubleshooting.
24. During cleaning or routine maintenance, DO NOT cut anything other than
hair, fibers, or string wrapped around the brushroll
25. Allow all filters to air dry completely before replacing in the 3-in-1
Cleaner to prevent liquid from being drawn into electric parts.
26. DO NOT modify or attempt to repair the
3- in-1 Cleaner or the battery yourself.
27. Use only Shark brand cleaning fluids intended for use with this appliance
to prevent internal component damage.
BATTERY PACK
28. The battery is the power source for the
3- in-1 Cleaner. Carefully read and follow all charging instructions.
29. To prevent unintentional starting, ensure the 3-in-1 Cleaner is powered
off before picking up or carrying the 3-in-1 Cleaner. DO NOT carry the
appliance with your finger on the power switch.
30. Use only Shark charger XDOCKWD200. Use of an incorrect charger may result
in no charging, and/or unsafe conditions.
31. The battery pack is non-serviceable. Call consumer services with any
questions and concerns.
32. Under abusive conditions, liquid may be ejected from the battery. Avoid
contact with this liquid, as it may cause irritation or burns. If contact
occurs, flush with water. If liquid contacts eyes, seek
SAVE THESE INSTRUCTIONS
ASSEMBLY
1. Align the Pole with the opening in the Main Body and insert firmly until it clicks into place.
2. Place the Dock on the floor near a wall outlet and plug in the cord. Wind the remaining cord around the Cord Wrap on the back of the dock.
NOTE: When assembling your HydroVac, there may be a little water in or around the water tanks. This is because we test all our HydroVacs before you buy them to ensure the highest quality.
NOTE: To remove the handle, press the release button located on the back of the unit with a thin tool while pulling up on the handle.
LI-ION BATTERY
Prior to first use, charge the battery completely. A full charge takes approximately 4 hours.
LED BATTERY POWER AND CHARGING INDICATOR
NOTE: The Shark® battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of a new battery.
USING YOUR 3-IN-1 CLEANER
CHARGING ON THE DOCK
Charge the unit by placing it on the dock. Make sure the contacts on the body are aligned with the contacts on the charging dock.
The Battery Icon on the main body will illuminate when charging begins.
When charging is complete and you need to use the unit again, lift it off the
dock
NOTE: When docked properly, the charging lights on the Main Body will blink, indicating that charging has begun. When charging is complete, all three indicator lights will turn off.
NOTE: The main unit comes with a partial charge. For maximum runtime, charge fully before first use (approximately 4 hours). Leaving the unit charging will not damage battery life.
USING YOUR 3-IN-1 CLEANER
FILLING THE CLEAN SOLUTION TANK
Press the release button and lift off the Clean Solution Tank.
Unscrew the cap and add water to the tank, up to the WATER line. Next, add Shark HydroVac™ Multi-Surface Concentrate, filling to the HYDROVAC CONCENTRATE line. Replace the cap and reinsert the tank until it clicks into place. The top of the tank should be flush with the top of the body.
NOTE: Only use Shark HydroVac Multi-Surface Concentrate, Shark HydroVac Disinfectant, and water with this product.
NOTE: Be sure to not overfill the Clean Solution Tank with more HydroVac Multi Surface Concentrate than instructed, as this may clause streaking.
NOTE: Without sufficient water supply in the clean solution tank, HydroVac will not run.
USING YOUR 3-IN-1 CLEANER
CONTROLS
Press and release the Power button on the handle to turn on power. To turn off power, press the button again.
CLEANING MODES
Use Hard Floor mode for powerful cleaning on bare floors. To activate Hard Floor mode, turn on the unit and tilt the handle back.
AREA RUG MODE
To clean area rugs, press the Area Rug icon on top of the handle. The Area Rug light on the main body will illuminate. To turn off Area Rug mode (and to switch back to Hard Floor Mode), press the button again.
NOTE: To prevent leakage, DO NOT place the main body on the floor. The nozzle should always be kept flat on the floor. NOTE: If you encounter a difficult stain, use Area Rug Mode for improved stain cleaning.
NOTE: If you encounter a stubborn odor on your floor or area rug, continue to clean in Area Rug mode until the odor is gone.
NOTE: If your floors are cloudy, streaky, or spotty after cleaning, it may be due to accumulated soap or grease residue. The floor may require several cleanings with the Hydrovac.
MAINTAINING YOUR 3-IN-1 CLEANER
SELF-CLEAN CYCLE
The self-clean cycle automatically cleans the system and the brushroll. Recommended after every use
1. Place the unit on the charging dock.
2. Empty the Dirty Water Tank and make sure the clean solution tank is at
least half full.
3. Press the Power Button to start the self-clean cycle. The icon will pulse
for the full 2-minute duration of the cycle.
4. DO NOT remove the unit from the dock during the self-clean cycle. The icon
will turn off when the cycle is complete.
5. Empty the dirty water tank.
See LED Glossary for more information on indicator lights during self-clean cycle.
NOTE: Make sure the clean solution tank is at least half full and that the dirty water tank is empty before running the self-clean cycle.
MAINTAINING YOUR 3-IN-1 CLEANER
MANUALLY CLEANING THE BRUSHROLL
You can clean the brushroll by hand as an alternative to the self-clean cycle, and to remove debris or hair wrapped around the brushroll.
1. To access the brushroll, press the button on the top of the nozzle and lift off the brushroll cover.
2. Remove the brushroll by pulling up on the pull tab on the left side of the nozzle. Wipe away any debris stuck on the back wall.
Wash thoroughly with warm water. Allow the brushroll to air-dry completely in a well-ventilated area for at least 24 hours.
3. Reinsert the brushroll by lining up the grooves on the end of the brushroll with the helix on the inner right side of the nozzle, then press down on the left side of the brushroll. When properly installed, the brushroll tab will be flush with the left side of the nozzle
4. To reinstall the brushroll cover, insert the tabs on the cover into the slots on the nozzle. Press down on the cover until it clicks into place.
NOTE: Do not place brushroll in washing machine or dishwasher. Replace the brushroll after 6 months.
CLEANING THE DIRTY WATER TANK
1. To remove the dirty water tank, press the release button and pull out the tank.
2. To dispose of liquid waste only, pour it out though the Easy Pour spout on the back of the dirty water tank.
3. To dispose of solid debris, lift out the Solids Separator. Grasp the recessed areas on the sides of the separator and lift it out. Empty the solid debris into the trash. If any liquid waste remains in the tank, pour it down a drain. To clean, rinse the separator and the tank with water.
4. Clean the filter housing and the foam filter after every use. Pull out the foam filter and hand-wash with warm water and soap.
Allow the foam filter to air-dry completely in a well-ventilated area for 24 hours before reinstalling back into the unit.
NOTE: Replace the filter every 6 Months.
NOTE: Do not place dirty water tank in washing machine or dishwasher.
5. After cleaning the dirty water tank and the solids separator, allow them to air-dry in a well-ventilated area for at least 24 hours. To reinstall the tank, insert the bottom into the opening in the main body, then tilt the tank back until it clicks into place.
CHECKING FOR BLOCKAGES
If you run over a hard or sharp object or notice a noise change while using your unit, check for blockages or objects caught in the brushroll, nozzle chamber, or inlet hose.
1. Turn off the power.
2. Remove the brushroll cover, brushroll, and dirty water tank.
3. Check the openings and remove all debris.
4. When finished, reinstall the brushroll and the cover.
ORDERING REFILLS AND PARTS
Replace the filter and brushroll every 6 months.
Only use Shark HydroVac™ Disinfectant, Shark HydroVac Concentrates, or water
with the Shark HydroVac.
To order brushrolls, filters, Shark HydroVac Multi-Surface Concentrate, and Shark HydroVac Disinfectant, please visit sharkclean.com or scan the QR code below.
LED GLOSSARY
THREE (3) YEAR LIMITED WARRANTY
The Three (3) Year Limited Warranty applies to purchases made from authorized
retailers of SharkNinja Operating LLC. Warranty coverage applies to the
original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and
workmanship for a period of three (3) years from the date of purchase when it
is used under normal household conditions and maintained according to the
requirements outlined in the Owner’s Guide, subject to the following
conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in
SharkNinja’s sole discretion, will be repaired or replaced up to three (3)
years from the original purchase date.
2. I n the event a replacement unit is issued, the warranty coverage ends six
(6) months following the receipt date of the replacement unit or the remainder
of the existing warranty, whichever is later. SharkNinja reserves the right to
replace the unit with one of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as Shark Cleaner, Pad, etc.),
which require regular maintenance and/or replacement to ensure the proper
functioning of your unit, are not covered by this warranty. Replacement parts
are available for purchase at sharkaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse (e.g., not cleaning the filters or not removing
debris from the brushroll), abuse, negligent handling, failure to perform
required maintenance, or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These
defects include damages caused in the process of shipping, altering, or
repairing the SharkNinja product (or any of its parts) when the repair is
performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal
household conditions within the warranty period, visit sharkclean.com/support
for product care and maintenance self-help. Our Customer Service Specialists
are also available at 1-800-798-7398 to
assist with product support and warranty service options, including the
possibility of upgrading to our VIP warranty service options for select
product categories. So we may better assist you, please register your product
online at registeryourshark.com and have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for
repair or replacement. A fee of $25.95 (subject to change) will be charged
when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-800-798-7398 to
initiate a warranty claim. You will need the receipt as proof of purchase. We
also ask that you register your product online at registeryourshark.com and
have the product on hand when you call, so we may better assist you. A
Customer Service Specialist will provide you with return and packing
instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other
rights that vary from state to state. Some states do not permit the exclusion
or limitation of incidental or consequential damages, so the above may not
apply to you.
The Three (3) Year Limited Warranty applies to purchases made from authorized
retailers of SharkNinja Operating LLC. Warranty coverage applies to the
original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and
workmanship for a period of three (3) years from the date of purchase when it
is used under normal household conditions and maintained according to the
requirements outlined in the Owner’s Guide, subject to the following
conditions and exclusions:
What is covered by this warranty?
1. The original battery deemed defective, in SharkNinja’s sole discretion,
will be replaced up to three (3) years from the original purchase date.
2. I n the event a replacement battery is issued, the warranty coverage ends
six (6) months following the receipt date of the replacement battery or the
remainder of the existing warranty, whichever is later. SharkNinja reserves
the right to replace the unit with one of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of the battery, which requires optimal temperature
storage and operation to ensure its proper functioning.
2. A battery that has been tampered with or used for commercial purposes.
3. Damage caused by misuse (e.g., exposing battery to liquids or extreme hot
and/or cold temperatures), abuse, negligent handling, failure to perform
required maintenance, or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These
defects include damages caused in the process of shipping, altering, or
repairing the SharkNinja product (or any of its parts) when the repair is
performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your battery fails to operate properly while in use under normal household
conditions within the warranty period, visit sharkclean.com/support for
product care and maintenance self-help. Our Customer Service Specialists are
also available at 1-800-798-7398 to
assist with product support and warranty service options. So we may better
assist you, please register your product online at registeryourshark.com and
have the product on hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for
replacement. A fee of $20.95 (subject to change) will be charged when
SharkNinja ships the replacement unit.
How to initiate a warranty claim
You must call 1-800-798-7398 to
initiate a warranty claim. You will need the receipt as proof of purchase. We
also ask that you register your product online at registeryourshark.com and
have the product on hand when you call, so we may better assist you. A
Customer Service Specialist will provide you with return and packing
instruction information when you call. A Customer Service Specialist will
provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other
rights that vary from state to state. Some states do not permit the exclusion
or limitation of incidental or consequential damages, so the above may not
apply to you.
NOTES
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
This Owner’s Guide is designed to help you get a complete understanding of
your new Shark HydroVac™ Cordless 3-in-1 Cleaner.
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
Illustrations may differ from actual product. We are constantly striving to
improve our products, therefore the specifications contained herein are
subject to change without notice.
This product may be covered by one or more U.S. patents. See
sharkninja.com/patents for more information.
© 2022 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. SHARK HYDROVAC is a trademark of SharkNinja Operating LLC. RBRC is a trademark of Rechargeable Battery Recycling Corporation.
WD200Series_IB_E_F_S_MP_Mv2
Read More About This Manual & Download PDF:
References
- Shark UK Official | Vacuums, Steam, Air Purifiers & Beauty
- Shark UK Official | Vacuums, Steam, Air Purifiers & Beauty
- Shark United Kingdom
- Shark Clean
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>