ANKER GaNPrime 150W 747 Charger User Manual
- June 4, 2024
- Anker
Table of Contents
ANKER GaNPrime 150W 747 Charger
Attention
Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help
The following importer is the responsible party (for FCC matters only).
- Company Name: Fantasia Trading LLC
- Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
- Telephone: +1 (800) 988 79733
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC &
2019/1782/EU. The full text of the EU declaration of conformity is available
at the following internet address: https://www.anker.com.
Hereby, Anker Innovations Limited declares that this product is in compliance
with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic
Compatibility Regulations 2016 & The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 &
The Ecodesign for Energy-Related Products Regulations 2010. The full text of
the GB declaration of conformity is available at the following internet
address: https://www.anker.com.
Indoor use only
This symbol indicates that this product shall not be treated as household
waste. Instead, it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Specifications
Input | 100-240V~2.3A 50-60Hz |
---|
Output
| Use One Port
Use 1 Port Output/ 出力 USB-C1(Top Type-C Port)
USB-C1/USB-C2 /USB-C3:
5V 3A /9V 3A /15V 3A /20V 5A(100W Max)
USB-A :
5V 3A /5V 4.5A /9V 2A/
12V 1.5A / 4.5V 5A (22.5W Max)
Use Two Ports
USB-C1+USB-C2 : 150W Max
USB-C2+USB-C3 : 150W Max USB-C1+USB-C3 : 150W Max
USB-C1+USB-A :5V 4.8A(24W Max) USB-C2/C3+USB-A: 100W+18W Max
Use Three Ports
USB-C1+USB-C2+USB-C3: 150W Max
USB-C2+(USB-C1+USB-A):100W+24W Max USB-C3+(USB-C1+USB-A): 100W+24W Max USB-C2+USB-C3+USB-A:150W Max
Use Four Ports :150W Max Total Output: 150W Max
Average Active Efficiency | 84.93% |
---|---|
Efficiency at Low Load (10%) | 71.71% |
No-Load Power Consumption | 0.23W |
Recommended Operating Temperature | 0℃~ 25℃ /32 ℉ -77 ℉ |
Customer Service
- 24-month limited warranty*
- Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the
- Lifetime technical support
- support@anker.com /support.mea@anker.com (For Middle East and Africa Only)
- (US) +1 (800)988 7973 Mon-Fri 6:15 – 17:00 (PT)/(UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00;
ForFAQs and more information, please visit: anker.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>