rocstor Y10G005-B1 Long Range Wireless 4K Video Tra User Manual

: June 13, 2024
: rocstor

Table of Contents

rocstor Y10G005-B1 Long Range Wireless 4K Video Tra
Product Information
Product Usage Instructions
Important Safety Instructions
Introduction
Features
Package Contents
Installation Requirements
Panel Description
Installation Procedures
FAQ
Disclaimer
Specification
Contact Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

rocstor Y10G005-B1 Long Range Wireless 4K Video Tra

Product Information

Product Name: HDMI Wireless EXTENDER 4K/60Hz Point-to-Point
Extender
Model Number: H22071AH1
Package Contents:
- Transmitter x1
- Receiver x1
- 5V 2A power adapter x2
- IR receiver extension cable x1
- IR blaster extension cable x1
- Antenna x4
- Mounting ear x4
- Screw x10
- Grounding screw x2
- User manual x1

Product Usage Instructions

Installation Requirements

HDMI source device (DVD, game console, PC, etc.)
HDMI display device (TV, projector, LED screen, etc.)

Panel Description – Transmitter (TX)

Power indicator
WiFi indicator
Signal indicator
Channel switch button
- The indicator will turn blue when the power is turned on
- a) Slow flash: waiting for connection
- b) Steady on: connection succeeded
- c) Quick flash: SSID Pairing mode
Antenna connectors
Micro USB port (Used for firmware upgrade)
HDMI input (Connect with HDMI source device with HDMI cable)
HDMI output (Connect with local HDMI display device with HDMI cable)
IR out (Connect with IR blaster extension cable)
Power input (Connect with DC 5V/2A power adapter)

Panel Description – Receiver (RX)

Power indicator
WiFi indicator
- The indicator will turn blue when the power is turned on
- a) Slow flash: waiting for connection
- b) Steady on connection succeeded
- c) Quick flash: SSID Pairing mode
Signal indicator
Channel switch button
- a) Light off: no HDMI signal
- b) Steady on: HDMI signal is transmitting
- c) Quick flash: restore factory settings
- After connecting with TX, press to switch channels
- Press and hold 5s for SSID pairing
- Press and hold 10s for restore factory settings
Antenna connectors
Micro USB port (Used for firmware upgrade)
HDMI output (Connect with HDMI display device with HDMI cable)
IR in (Connect with IR receiver extension cable)
Power input (Connect with DC 5V/2A power adapter)

Installation Procedures

Connection Diagrams – One-to-one connection

Connection Instructions

Connect the source device to the HDMI IN port of the transmitter with an HDMI cable.
Connect the HDMI OUT port of the receiver to the display device with another HDMI cable.
If using the IR passback function:
- Connect the IR blaster extension cable to the IR OUT port of the transmitter.
- Connect the IR receiver extension cable into the IR IN port of the receiver.
- a) The emitter of the IR blaster extension cable should be as close as possible to the IR receiving window of the source device.
- b) Point the remote control at the receiving head of the IR receiver extension cable to operate.

Important Safety Instructions

Do not expose this device to rain or place it near water. Any liquid that goes into the device may cause a device failure, fire, or electric shock.
Do not insert any objects into the open parts of this device. This may cause a danger of electric shock.
Do not place this device near or over a radiator or heat register, or where it is exposed to direct sunlight.
The device should be repaired only by a qualified technician.
If a third-party power supply is used, please ensure that the power supply specifications meet the product requirements.

Introduction

The Rocstor TrueReach 4K@60Hz HDMI wireless extender includes a transmitter and a receiver. It provides color PIXEL technology which provides a high definition and low-latency transmission. It is based on the 5G wireless frequency bandwidth, with stable anti-interference and safety performance. It supports 1-to-1 wireless transmission, and the transmission distance can reach 164 ft (50m). Effectively solving problems caused by complicated wiring. It’s an ideal wireless video transmission solution for video conferences, home entertainment, multimedia education, and more.
Note:

Transmission distances may vary depending on the environment.
Signals may be reduced or completely lost by solid structures such as walls, bricks, and glass.
The surrounding wireless signal may cause certain interference to the transmission, and the channel can be switched to reduce the interference.

Features

Includes color PIXEL technology for high-definition and low-latency transmission.
Supports up to 3840×2160@60Hz resolution, backward compatible.
Supports wireless transmission up to 164 ft (50m) line of sight.
The transmitter supports HDMI loop out.
In case of multiple sets of products in the same area, this device supports SSID pairing and channel switching to avoid interference.
Supports IR passback.
Supports 5G wireless frequency bands for a strong anti-interference.
Supports firmware upgrade via Micro USB port.

Package Contents

Installation Requirements

HDMI source device (DVD, game console, PC, etc.)
HDMI display device (TV, projector, LED screen, etc.)

Panel Description

Transmitter (TX)

1

| Power indicator| The indicator will turn blue when the power is turned on
---|---|---

2

| ****

WiFi indicator

| a) Slow ash: waiting for connection

b) Steady on: connection succeeded

c) Quick ash: SSID Pairing mode

3

| ****

Signal indicator

| a) Light o : no HDMI signal

b) Steady on: HDMI signal is transmitting

c) Quick ash: restore factory settings

4

| ****

Channel switch button

| a) press to switch channels

b) Press and hold 5s for SSID pairing

c) Press and hold 10s for restore factory settings

| |

5

| Antenna connectors| Connect with antennas
---|---|---
6| Micro USB port| Used for rmware upgrade
7| HDMI input| Connect with HDMI source device with HDMI cable

8

Receiver (RX)

1

| Power indicator| The indicator will turn blue when the power is turned on
---|---|---

2

| ****

WiFi indicator

| a) Slow ash: waiting for connection

b) Steady on: connection succeeded

c) Quick ash: SSID Pairing mode

3

| ****

Signal indicator

| a) Light o : no HDMI signal

b) Steady on: HDMI signal is transmitting

c) Quick ash: restore factory settings

---|---|---

4

| ****

Channel switch button

| a) After connecting with TX, press to switch channels

b) Press and hold 5s for SSID pairing

c) Press and hold 10s for restore factory settings

5

Installation Procedures

Connection Diagrams
One to one connection
Connection Instructions
Connect the source device to the HDMI IN port of the transmitter with an HDMI cable, and connect the HDMI OUT port of the receiver to the display device with another HDMI cable.
If using the IR passback function, connect the IR blaster extension cable to the IR OUT port of the transmitter, and connect the IR receiver extension cable to the IR IN port of the receiver.
a: The emitter of the IR blaster extension cable should be as close as possible to the IR receiving window of the source device.
b: Point the remote control at the receiving head of the IR receiver extension cable to operate.
Plug the power supply into the devices to get started.
In the case of multiple sets being used at the same time in the same area, switch each set of transmitters and receivers to a different channel after they have been manually paired with the SSID to prevent interference,
SSID Pairing
Enter the SSID pairing mode by holding the transmitter and receiver’s channel switch buttons for five seconds. Both WiFi connection indicators will flash quickly in blue.
When the SSID pairing is successful, the WiFi indicators on the transmitter and receiver will change from quick flashing to slow flashing or steady ON.

NO.	Frequency
Channel 1	5.180 GHz
Channel 2	5.200 GHz
Channel 3	5.220 GHz
Channel 4	5.240 GHz

FAQ

Q: Why the receiver and transmitter cannot be connected, showing “Search Tx…” on the screen?
A: 1) Move the transmitter and receiver closer.

Re-power the transmitter or receiver.
Re-pair the transmitter and receiver.

Q: Why the Wi-Fi indicator is steady on but showing “Please check the TX input signal” ?
A: 1) Make sure the TX has HDMI input and that the resolution is within the specified range.

Try to connect the signal source directly to the display device, or change the signal source and HDMI cable and test again.

Q: Why is the display stuttering or unstable?
A: 1) Place the transmitter or receiver within the signal coverage and minimize obstructions between the transmitter and receiver.

Switch to a different channel to avoid interference from other wireless signals.
Re-power the receiver or transmitter.

Disclaimer

©2023 Rocstroge, Inc. Rocstor is a registered trademark of Rocstorage, Inc. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress, and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. The product name and brand name may be registered trademarks of related manufacturers. ™ and ® may be omitted from the user manual. The pictures in this user manual are just for reference. We reserve the right to make changes without further notice to a product or system described herein to improve reliability, function or design.

Specification

Items	Speci cations

Power Supply

| Voltage/Current| DC 5V/2A
Power consumption| TX ≤ 6W, RX ≤ 4W

HDMI

Performance and Interface

| HDMI version| HDMI 2.0
HDCP version| HDCP 1.4/HDCP 2.2
Maximum transfer rate| 18Gbps

Resolution supported

| 3840×2160@24/30/50/60Hz,

1080P@50/60Hz, 720P@50/60Hz,

1920×1200, 2560×1440, 2560×1600

Input and output TMDS signal| 0.7~1.2Vp-p (TMDS)
Input and output DDC signal| 5Vp-p (TTL)

Transmission

Protection Level

| ****

ESD protection

| 1a Contact discharge level 3 1b Air discharge level 3 Standard: IEC61000-4-2

IR Performance

| Infrared frequency| 20~60kHz
Receiving range| ≤ 5m

Operating Environment

| Working temperature| ****

-20~60°C

Storage temperature| -30~70°C
Humidity (no condensation)| 0~90% RH

Physical Properties

| Dimension| TX: 115(W) x 125(L) x 20.6(H) mm

RX: 115(W) x 125(L) x 20.6(H) mm

---|---|---
Color| Black
Material| Iron
Net weight| TX: 353g; RX: 346g

Physical Properties

| Dimension| TX: 115(W) x 125(L) x 20.6(H) mm

RX: 115(W) x 125(L) x 20.6(H) mm

Color| Black
Material| Iron
Net weight| TX: 353g; RX: 346g

Contact Information

Corporate Headquarters
12979 Arroyo Ave
San Fernando, CA 91340 – USA
Offce : +1 818-727-7000
Fax : +1 818-875-0002
Email : info@Rocstor.com

Technical Support / RMA
Hours : 9:00 am – 5:00 pm PST
Mon – Fri (excluding holidays)
Tell : +1 818-727-7000 (DOM/INTL)
Fax : +1 818-875-0002
Email : support@Rocstor.com

Sales Info
Hours : 8:00 am – 5:00 pm PST
Mon – Fri (excluding holidays)
Tell : +1 818-727-7000 (DOM/INTL)
Fax : +1 818-875-0002
Email : support@Rocstor.com

Corporate, Government, and Academic Customers
Our Corporate Sales Team’s goal is to help our U.S.A. and Canadian customers find a storage solution that best serves their needs. We will help you determine your best purchasing options. For more information please contact the appropriate department below or call us at +1 818-727-7000. General sales information: Corporate sales information:
Educational sales information : sales@Rocstor.com corporate_sales@Rocstor.com academic_sales@Rocstor.com
Federal, State, and local government sales information: government_sales@Rocstor.com

Resellers/Business Development/OEM Partners
All Channel National and International Resellers, VARs, and Consultants contact Rocstor Channel Sales:
call : +1 818-727-7000
Email : reseller_info@Rocstor.com