AV Access 8KSW21DP-DM 2×1 Dual Monitor DP KVM Switcher User Manual

AV Access 8KSW21DP-DM 2×1 Dual Monitor DP KVM Switcher

Product Information

The 8KSW21DP-DM is a 2×1 DP 1.4a KVM Switcher with dual-channel switching and hotkey switching. It supports the latest DP 1.4a and HDCP 2.2 compatibility, and can transmit USB 3.0 signal up to 5Gbps for KVM function. It allows you to share two monitors and USB devices between two PCs. The switcher features virtual interaction function, automatically wakes up the connected PC in standby mode, and supports direct switching through buttons on the front panel, IR remote, and hotkey through a keyboard connected to the special USB 1.1 port. It provides wide compatibility for different operating systems, such as Windows, Mac OS, and Linux, with no driver required.

Product Features:

• 2 in 1 dual-channel KVM switcher
• Supports resolutions up to 8K
• Supports high refresh rates
• Supports multiple DP features: MST, HDR, VRR
• Multiple Peripherals interfaces: USB 3.0 ports, USB 2.0 port, USB 1.1 port for keypad
• Provides independent mic input and audio output
• Upgraded hotkey algorithm for compatibility with various types of keyboards
• Supports multiple control options: IR, front panel button, and hotkey switch
• Includes high-grade DP 1.4a cables and USB 3.0 cables

Package Contents:
Before you start the installation of the product, please check the package contents:

• Switcher x 1
• Power Adapter (DC 12V 2A) x 1
• IR Remote x 1
• USB 3.0 Type-A to Type-B Cable x 2
• DP 1.4a Cable x 6
• User Manual x 1

Panel

Front Panel:

1. Power Button
2. Switch Button and LED 1&2
3. USB 1.1
4. USB 2.0
5. IR
6. MIC In
7. Line Out
8. USB 3.0

on, the backlight of the button will light blue.
2| Switch Button and LED 1&2| Press to select input group between DP In 1A/1B and DP In 2A/2B.
LED 1&2:
On: Select DP In 1A and 1B or DP In 2A and 2B as input sources.
Off: The corresponding DP Inputs are not selected.
3| USB 1.1| USB 1.1 type-A port, can be used to connect to a USB keyboard for hotkey function. (Detail information, please refer to “Hotkey Function” section)
Note: It is specialized for connecting keyboard and not recommended to connect to other USB slave devices.
4| USB 2.0| USB 2.0 type-A port. Connect to a USB device such as a mouse.
5| IR| IR receiving window. Receive IR signals.
6| MIC In| Connect to a Microphone. The Microphone follows the USB Host port selected.
7| Line Out| Connect to an earphone. The earphone follows the USB Host port selected.
8| USB 3.0| USB 3.0 type-A ports, can be used to connect to USB 3.0 high-speed device for KVM function.
Note: With one high power port of 5V 1.5A supported, it can be used for connecting USB devices with high power, such as connecting a USB Camera.

Rear Panel

1A and DP In 1B can be seen as a group, hereinafter referred to as group 1 in this manual.
3| USB Host 1| Connect to a host device. USB Host 1 is bound with group 1. When select group 1 as sources to input, the USB devices can be connected to the host PC connected to USB Host 1 port.
5&7| DP In 2A & 2B| Connect to two DP output ports of PC respectively. DP In 2A and DP In 2B can be seen as a group, hereinafter referred to as group 2 in this manual.
6| USB Host 2| Connect to a host device. USB Host 2 is bound with group 2. When select group 2 as sources to input, the USB devices can be connected to the host PC connected to the USB Host 2 port.
8| Monitor A & B| Connect to DP displays.
9| Update| Micro USB, for firmware upgrade.

Product Usage Instructions

1. Connect the DP input channels of the switcher to the DP output ports of the PCs.
2. Connect the external monitors to the DP output ports of the switcher.
3. Connect the USB devices to the USB ports of the switcher.
4. Connect the mic and audio devices to the respective ports on the switcher.
5. Power on the switcher using the Power Button.
6. To switch between PCs, you can use any of the following methods:
   • Press the Switch Button on the front panel.
   • Use the IR Remote to select the desired PC.
   • Use the hotkey switch on a keyboard connected to the USB 1.1 port.
7. Ensure that the connected monitors support the desired resolution and refresh rate.
8. For advanced features like MST, HDR, and VRR, refer to the user manual for further instructions.

Introduction

Overview
8KSW21DP-DM is a 2×1 DP 1.4a KVM Switcher with dual-channel switching and hotkey switching. It supports latest DP 1.4a and HDCP 2.2 compatibility, and supports resolutions up to 8K and can also transmit USB 3.0 signal up to 5Gbps for KVM function. It can share two monitors and USB devices between two PCs.
The switcher features virtual interaction function, and automatically wake-up the connected PC in standby mode, which can reduce the switching time. It also supports direct switching through buttons on front panel, IR remote and hotkey through keyboard connected to the special USB 1.1 port. It provides a wide compatibility choice for different operating systems, such as Windows, Mac OS and Linux, no driver required and simple plug and play.

Features

• 2 in 1 dual-channel KVM switcher:

  • Each input group support two independent DP input channels, which can be connected to two DP output ports of the PC and extended to two external monitors.
  • Each monitor has independent channel, which can support different resolution.

• Supports 8K resolution and high refresh rate – supports the standards of DP 1.4a HBR3, and supports the following resolutions:

  •  8K@30Hz
  • 4K@120Hz/60Hz
  • 3440×1440@144Hz/120Hz/60Hz (UWQHD)
  • 2560×1440@165Hz/144Hz/120Hz/60Hz
  • 1080P@240Hz/165Hz/144Hz/120Hz/60Hz

•  Supports 1.5m input cable and 3m output cable.
  Note: please use the cables certified by DP 2.0 and DP1.4a.

• Supports multiple DP features:

  •  MST – Supports DP MST, each DP port can be connected with multiple DP monitors.
  • HDR – Supports all HDR formats.
  • VRR – Supports VRR variable refresh rate.

• Multiple Peripherals interfaces:

  •  Three super high-speed USB 3.0 ports.
  • One USB 2.0 port and one USB 1.1 port for keypad.
  • Provides independent mic input and audio output (3.5mm earphone) ports.

•  Supports USB 3.0 data transmission with the speed up to 5Gbps.

• Supports new generation PC automatic wake-up function –automatically wake up the PC in standby mode when switching.

• Fast switching time of 2-3s, based on the virtual interaction function.

• New compatibility Hotkey design – fully pass-through mode and newly upgraded hotkey algorithm:

  • All key values are passed-through and compatible with various types of keyboards on the market.
  • Specially optimized hotkey algorithm for complex gaming keyboards and macro defined keyboards.

• Supports multiple control options, including IR, front panel button and hotkey switch.

• Provides four high grade DP 1.4a cables, which can support transmitting 8K signals, and provides two USB 3.0 cables, which can support transmitting 5Gbps signals.

Application

Warnings:

• Before wiring, disconnect the power from all devices.
• During wiring, connect and disconnect the cables gently.

When switch input source to group 1 or group 2:

• The connected USB devices, microphone and earphone can be connected to Host PC 1 or 2.
• When switch to group 1, the display connected to Monitor A and Monitor B will output video from DP In 1A and DP In 1B respectively.

When switch to group 2, the display connected to Monitor A and Monitor B will output video from DP In 2A and DP In 2B respectively.

Control of the Switcher

You can choose to switch input sources at your convenience through front panel button, IR remote or Hotkey function.

Front Panel Control
Users can choose to use front panel button to do basic switching operations. Connect the switcher as required and power on all the attached devices.

IR Remote Control
The included remote handset can be used to turn on and off CEC-enabled display device and to switch two input groups to one display device. Point the remote handset directly at the IR windows on front panel.

System Code Switch
The IR Remote provided with the switcher is shipped in “00” IR system code. In the event that Remote’s IR signal interferes with IR devices, e.g., TV, DVD player, the Remote can be switched to “4E” code by short pressing the System code  on the Remote panel.

Hotkey Function

One USB 1.1 port on rear panel of the switcher supports keyboard Hotkey function. This function is enabled by default, and can be set to disabled/enabled through combined keys on the connected keyboard.
Supported Hotkey: Tab (default), Caps Lock

For example:
If you want to use the “Caps Lock” as a hotkey, please ensure the hotkey function is enabled, and press the “Caps Lock” key twice quickly to switch the hotkey to it, and other hotkeys are invalid. If you need to use other hotkeys, please repeat the above steps.

Specifications

Technical

Video Signal| DP in/out supports DP 1.4a standard, up to 8K@30Hz
USB Data| USB 3.0, up to 5Gbps data transfer rate. With one high – power of 5V/1.5A port included.
** Input/Output Resolution Supported| VESA:
800 x 6006, 1024 x 7686, 1280 x 7686, 1280 x 8006, 1280 x 9606, 1280 x 10246, 1360 x 7686, 1366 x 7686, 1440 x 9006, 1600 x 9006, 1600 x 12006, 1680 x 10506, 1920 x 12006, 2048 x 11526, 2560 x 14406,7,8,9,10, 3440 x 14406,7,8,9,10
Technical**

| CTA:
1280x720P5,6, 1920x1080P1,2,3,4,5,6,7,8,9,10,11, 3840x2160P1,2,3,4,5,6,7,8, 4096x2160P1,2,3,4,5,6,7,8, 5120×28801,2,3,5,7680×43201,2,3
1 = at 24 (23.98) Hz, 2 = at 25 Hz, 3 = at 30 (29.97) Hz,
4 = at 48 Hz, 5 = at 50 Hz, 6 = 60 (59.94) Hz,
7 = at 100Hz, 8 = at 120Hz, 9 = 144Hz, 10 = 165Hz,
11 = 240Hz
HDR Format Supported| All HDR formats, including HDR 10, HLG, HDR 10+ and Dolby Vision
**** Audio Format Supported| DP: Fully supports audio formats in DP 1.4a specification, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS- HD Master Audio and DTS:X
MIC IN: Stereo
LINE OUT: Stereo
Max Data Rate| 8.1Gbps per channel
General

Operating Temperature| 0°C to + 45°C (32 to + 113 °F)
Storage Temperature| -20 to +70°C (-4 to + 158 °F)
Humidity| 20% to 90%, non-condensing
Power Consumption| 4.62W (Max)
Device Dimensions (W x H x D)| 230mm x 28.2mm x 142.6mm/ 9.06’’ x 1.11’’ x 5.61’’
Product Weight| 0.83kg/1.83lbs

Warranty

Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable.

1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
4. The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but not covered by normal contract.
6. AV Access Technology Limited preserves the right for interpretation of these cases above and to make changes to them at any time without notice.

Thank you for choosing products from AV Access.
If you have any question, please contact us via the following emails:
General Enquiry: info@avaccess.com
Customer/Technical Support: support@avaccess.com
www.avaccess.com
info@avaccess.com

References

• AV Access | Quality & Budget Assured Pro AV Product Manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>