GENERALLIFE MITRA 230S RF Wireless Room Thermostat User Manual

MITRA 230S RF Wireless Room Thermostat

Product Information

The MITRA 230S RF is a wireless room thermostat that allows users to adjust the room temperature for more comfortable and economic heating/cooling. It offers precise temperature measurement, heating calibration, and heating/cooling modes. The thermostat features ON/OFF control and utilizes a TPI algorithm for efficient operation. The package includes the MITRA 230S RF room thermostat, a holder, alkaline batteries, a receiver, and dowels and screws for installation.

Technical Data

• Room Thermostat Dimensions: 85mm / 125mm / 24mm
• Operating Current: 3V DC (2 x AAA alkaline battery)
• Temperature Measurement Accuracy: 0.1°C
• Operating Temperature Range: Storage Temperature
• Battery Life: Operating Temperature

Room Thermostat

Temperature Measurement

Accuracy

| 0.1oC
Operating Temperature Range| (5oC) – (30oC)
Battery Life| 1 Years (2 x AAA)
Operating Temperature| (-10oC) – (+50oC)
Storage Temperature| (-20oC) – (+60oC)

Receiver

10A (120VAC – Resistive load)

Storage Temperature| (-20oC) – (+60oC)

Product Usage Instructions

The MITRA 230S RF room thermostat is designed to provide convenient control over the heating/cooling unit in your room. Follow the instructions below for proper usage:

1. Ensure that the batteries are properly placed in the roomthermostat.
2. Place the receiver at least 50 cm away from the heating/coolingunit to avoid physical contact.
3. Avoid placing the devices on metal surfaces or near electricalcables and electronic equipment.
4. Do not install the devices near large metal structures ormaterials that may interfere with signals.
5. The distance between the room thermostat and the receivershould not exceed 20 meters or 2 floors.
6. To pair the receiver and the room thermostat, press the pairingbutton on the receiver and follow the pairing instructions in theuser manual.
7. Monitor the receiver LED descriptions to ensure properoperation of the heating/cooling unit.
8. Use the ON/OFF and temperature setting button on the roomthermostat to adjust the desired room temperature.
9. Observe the battery indicator, heating indicator, coolingindicator, room temperature, and set temperature displayed on theroom thermostat for status updates.
10. If the heating or cooling indicator is blinking, it means therespective unit is working. If it is steady, the unit is notworking.
11. For manual operation, use the manual operation button on thereceiver to deactivate the receiver and control the heating/coolingunit manually.

GENERAL SPECIFICATIONS

MITRA 250S is a wired room thermostat. The user can adjust the room temperature with the required temperature and get more comfortable and economic heating/cooling.

• Precise Temperature Measurement
• Heating calibration
• Heating/Cooling Modes
• ON/OFF Control
• Wired Connection
• TPI Algorithm

MITRA 230S RF AND EQUIPMENT

ROOM THERMOSTAT

RECEIVER

1. Manual Operation Button:
   Deactivates the Receiver and allows you to use heating/cooling unit manually.

2. Pairing Button:
   Pairs the Receiver and the Room Thermostat.

3. Receiver LED Light

4. Receiver Power Cable Input

5. Heating/Cooling Unit Connection Cable Input

RECEIVER LED DESCRIPTIONS

Constant Red| Receiver has power but Receiver and Room

Thermostat are not paired.

---|---
Blinking Green| Waiting for pairing signal from the

Room Thermostat.

Constant Green| Receiver and Room Thermostat are paired.

Heating/cooling unit is not operating.

3 Short Orange

Blinking

| Operate the heating/cooling unit signal has

reached to the Receiver.

Constant Orange| Heating/cooling unit is operating.
3 Short Green

Blinking

| Shut the heating/cooling unit down signal has

reached to the Receiver.

Blinking Orange| Heating/Cooling unit operates in manual mode.
Blinking Red| Receiver did not get any signal from the Room

Thermostat for 22 minutes or longer. Heating/cooling unit has shut down.

ROOM THERMOSTAT PLACEMENT

Room Thermostat needs to be placed in the room which is used most frequently. For instance; living room or lounge. Placing the Room Thermostat in a spot that have air circulation like entrance of a room or side of window should be avoided. Also anywhere close to heating/cooling units such as radiator, stove and spots which get direct sun lights would not be suitable. Room Thermostat needs to be located above the floor 150 cm height. Few trials may be made to find the most convenient spot.

As shown in the picture above, press the screwdriver forward from the space shown, bend the tabs and separate the front cover. Insert 2 new AAA alkaline batteries in the battery housing with the correct battery direction. Replace both batteries at the same time. Then align the front part of your Room Thermostat to the back and squeeze it towards the back.
Low Battery Warning: When the “ ” icon appears on the screen, it means “low battery warning”. It is recommended to replace the batteries when this warning appears.
Warning: When the product is not used for a long period (more than 15 days), remove the batteries. Otherwise, malfunctions that may occur would be out of warranty.
Please throw your dead batteries into the waste bin for batteries.

RECEIVER PLACEMENT

The important things to note for the Receiver placement is avoiding physical contact between the Receiver and heating/cooling unit, and protecting it against materials such as liquid, dust etc.

The devices should be placed in order to minimize the damage to the received and transmitted signals by paying attention to the following points;

• The devices should not be mounted on metal surfaces.
• The devices should not be installed close to electrical cables and electronic equipment such as computers and television units.
• The devices should not be installed near large metal structures or other building materials using fine metal meshes such as special glass or special concrete.
• Distance between the Room Thermostat and the Receiver should not exceed 20 meters or 2 floors.
• Receiver must be installed at least 50 cm away from the heating/cooling unit.

RECEIVER SETUP

• First, shut down your heating/cooling unit and your heating/cooling unit’s power source with all electrical current (fuse, socket etc.)
•  As shown in the connection diagram, connect one end of the heating/cooling unit connection cable to the COM and the other to the NO input of the Receiver.
• Connect the other ends of the cable -which you connected to the Receiver to room thermostat connection terminal as shown in your heating/cooling unit’s user manual.
• You must first connect the Receiver power cable to the Receiver and then to the fuse to which the heating/cooling unit is connected.
• After completing the cable connection process, firstly turn on your fuse and then your heating/cooling unit.
• By pressing the Receiver’s manual usage button for 2 seconds, you should see the Orange Light blinking on the Receiver. In this way, after making sure that the heating/cooling unit is operating, press the same button again for 2 seconds and see that the Orange LED turns off.
• Set up the Room Thermostat to pair the Receiver with the Room Thermosta

RECEIVER WIRING DIAGRAM

Warning!
Operations within the heating / cooling unit or the electrical installation must be carried out by professionally qualified persons.

PAIRING THE ROOM THERMOSTAT AND THE RECEIVER

• Primarily press the sync button of receiver for 2 seconds and see blinking green light of
• While your device is turned off, press and hold the button for 3
• Press the button until the “ ” menu
• Then turn up the button to right or left
• If the pairing is successful, the green flashing LED on the receiver will be constant.
• Receiver and Room Thermostat have been paired to each other.

ROOM THERMOSTAT TEMPERATURE CALIBRATION

Temperature sensors which are used in Room Thermostats are highly sensitive. You may need to calibrate your Room Thermostat if you would like to get the same temperature values with other thermometers in your living space.

• While your device is turned off, press and hold the button for 3 seconds.
• Press the button until the “ ” menu appers. In order to see the desired temperature, set the temperature difference by turning the button to right or This value can be arranged between “-8oC” and “+8oC”.
• To save the settings and exit, press the “On/Off” button until the device turns off.

Note: Recommended tempreture calibration is “0.0oC”.

ROOM THERMOSTAT HEATING / COOLING MODES

Your Room Thermostat has heating and cooling modes. In order to switch easily between heating and cooling modes:

• While your device is turned off, press and hold the button for 3
• Press the button until the “ ” menu appears
• You can switch between “ ”  (heating) and “         ” (cooling) modes by turning the button to right or left in the “      ”
• To save the settings and exit, press the button until the device turns
• The settings you have made have been saved. Once you turned on your device, it will operate with the changed

FACTORY SETTINGS RESET

You can reset your Room Thermostat to its default factory settings. This operation resets the calibration setting, heating/coling modes and hysteresis settings to factory setting. To reset your Room Thermostat to factory setting:

• While your device is turned off, press and hold the button for 3 seconds.
• Press the button until the “ ” menu appears.
• While in the “ “ menu, turn the button to right or left in order to select “ “ option and press the button.
• Your device will be turned off and reset to factory

TPI ROOM THERMOSTAT WORKING LOGIC

Your Room Thermostat works with the TPI algorithm. Room Thermostats using TPI technology predict when the temperature of your home will rise above or below the set temperature and turn the heating / cooling unit on and off accordingly. This ensures that your home stays at the temperature you set without maximum deviations up and down.

What is TPI?

TPI technology is designed to ensure that you get the best possible energy efficiency from your heating / cooling system. It measures and applies the best possible timings to deliver and maintain your  home at the set temperature level.

How does TPI work?

Thanks to the advanced artificial intelligence technology found in the software, it adapts to the temperature change of the environment in which it is located. By creating a general temperature map of your home, it learns how long it takes to reach the desired room temperature and how to maintain this temperature. In this way, it provides minimum energy consumption by calculating how long your heating / cooling unit should work for.

What is the difference?

In non-TPI room thermostats, the heating / cooling unit works and stops continuously until it exceeds the set temperature value. If the set temperature drops below a certain amount, the heating / cooling unit will work again. This creates greater temperature fluctuations and less energy control. TPI Room Thermostats, on the other hand, provide higher savings and comfort compared to On/Off room thermostats with the advantages it has.

Heating Mode

Your room thermostat takes the average room temperature of last 40 seconds as basis. With the TPI algorithm in the product by creating a general temperature map of your home, it learns how long it takes to reach the desired room temperature and how this temperature is maintained. Thus, it ensures that the room temperature remains within a certain range

TPI ROOM THERMOSTAT HEATING MODE WORKING GRAPHIC

Cooling Mode

Your room thermostat takes the average room temperature of last 40 seconds as basis. With the TPI algorithm in the product by creating a general temperature map of your home, it learns how long it takes to reach the desired room temperature and how this temperature is maintained. Thus, it ensures that the room temperature remains within a certain range.

TPI ROOM THERMOSTAT COOLING MODE WORKING GRAPHIC

Your Room Thermostat sends the last status signal to the Receiver every 10 minutes. Thus, your Room Thermostat and Receiver work synchronously. If the signal cannot reach to the Receiver from the Room Thermostat for 22 minutes, it perceives that the connection is broken and stops the heating/cooling operation for safety reasons. Likewise, in cases where the electricity comes back after a power failure, the Receiver do not operate the heating/cooling unit until ‘operate’ signal reaches from the Room Thermostat.

However, in this case, if the Room Thermostat continues to operate normally, it will continue to work properly without any need for intervention since it sends a status signal to the Receiver every 10 minutes.

WHAT TO KNOW ABOUT TPI ROOM THERMOSTAT

• If the placement of the TPI Room Thermostats is changed, the learning process will restart. The learning process should be considered as 7
• If the TPI Room Thermostats are de-energized (battery replacement), the learning process will restart. The learning process should be considered as 7

FREQUENTLY ASKED QUESTIONS

• Is my Room Thermostat compatible with my heating/cooling unit?

  • If your heating / cooling unit has on-off connections, your Room Thermostat is compatible. You can find information about your heating / cooling unit from your heating / cooling unit operating manual or from your heating / cooling unit service.

• How will I connect my heating/cooling unit with my Receiver?

  • We recommend that the connection between the Receiver and heating/cooling unit should be made by professionally qualified persons.
  • 2×0.75 mm cable is sufficient for the Receiver – heating/cooling unit connection.
  • Connect one end of the cable pair to the room thermostat connection terminals stated in the user manual of your heating/cooling unit.
  • Connect the other end of the cable pair to COM and NO inputs of the terminal inside the Receiver as shown in the “RECEIVER WIRING DIAGRAM”section. The direction of the cable ends does not matter

DECLARATION OF CONFORMITY

ISIPARK İÇ VE DIŞ TİC. İNŞ. ISITMA SİSTEMLERİ OTO. SAN.A.Ş.which

Head Office and production site is located on Fatih Mah. 1188 Sk.No:13/A Sarnıç – Gaziemir – İZMİR – TÜRKİYE confirms and declares that the product marked with CE and its specifications below is covered by the provisions of the mentioned directive.

• Brand: GENERAL Life

• Product Name  :  MITRA  230S  RF

• Product Type : Digital Room Thermostat

• Compatible Directives

  • Radio and Telecommunications Terminal Equipment Regulation 2014/53/EU (R&TTE/RED EN 301 489-1 V2.1.1:2017,

  • EN 300 220-1 V3.1.1:2017, EN 301 489-3 V2.1.1:2017, EN 300 220-2 V3.1.1:2017, EN 62479: 2010)

  • Electromagnetic Compatibility Regulation 2014/30/EU (EMC EN 61000-6-3: 2007 + A1: 2011, EN 61000-6-1: 2007)

  • Low Voltage Directive 2014/35/EU

  • (LVD EN 60730-2-9:2010, EN 60730-1:2011)

Additional Information: The mentioned product can be used with heating/cooling units with on / off output and compliance with the directives only covers the product. ISIPARK is not responsible for the entire system’s compliance with the directives. This statement is not valid if changes are made to the product without our approval

WARRANTY CONDITIONS

1. The warranty period starts from the invoice date and warranted against manufacturing defects for 5
2. Devices and apparatus are delivered to the customer in working condition in our On-site commissioning is subject to a service fee.
3. The repair of the devices and apparatus covered by the warranty is carried out in our company factory and should send by contracted transportation company. In on-site services, the transportation and accommodation expenses of the service personnel belong to the The shift fee during transportation is added to the service fee and collected in advance.
4. The maintenance of devices and apparatus is done in our For the maintenance of the devices and apparatus, the round travel fares belongs to the customer.
5. In case of malfunctioning of the devices and apparatus whose warranty period continues, it is tested in our company whether the malfunction is caused by a customer or manufacturer fault, and it is reported with a report issued by our
6. In case of detection of manufacturer-induced errors of devices and apparatus whose warranty period continues, the customer can request a replacement or repair of the devices and apparatus at full expense by the manufacturer, unless it’s higher than the product’s
7. In the event that the faults of the devices and apparatus whose warranty period continues are determined as caused by the customer, all expenses would be belong to the
8. Customers should be aware of damages (if there is any) of product and warn manufacturer since the day warranty duration If customer do not warn manufacturer with knowledge of damage, customer lose the rights of article 6. 9-Malfunctions resulting from the use of devices and apparatus contrary to the matters stated in the User Manual are not covered by the warranty.
9. Devices and their apparatus are out of warranty if they are beaten, broken or scratched by the
10. Damages resulting from the use of devices and apparatus belonging to other brands and models without the approval of the manufacturer are not covered by the
11. Battery leakage and errors due to rust, oxidation and liquid contact by working in acidic / humid environments are not covered by the warranty
12. When the product is not used for a long period (more than 15 days), remove the batteries. Otherwise, malfunctions that will occur are out of warranty.
13. Damages that may occur during the transportation of devices and apparatus are not covered by the warranty. Customers can take a transportation insurance.
14. Damages caused by mains voltage / faulty electrical installation are not covered by the warranty.
15. Devices and apparatuses are out of warranty for malfunctions caused by force majeure such as fire, flood, earthquake etc.
16. All of the devices and apparatuses, including all their parts, are under the warranty of our company.
17. In case of malfunction of the devices and apparatuses within the warranty period, the time spent during repairment period is added to the warranty period. The repair period of the product cannot exceed 20 working days. This period starts from the date of notification to the service station of the malfunction related to the product or, in the absence of a service station, to the seller, dealer, agency, representative, importer or manufacturer of the product. Consumer can report the problem by; phone, fax, e-mail, registered and reply paid letter or a similar way. However, in case of a conflict, responsibility of prove is belong to the customer. If the malfunction of the product is not repaired within 20 working days, the manufacturer-producer or importer; has to allocate another product with similar features to the use of the consumer until the repair of the product is completed,
18. Although the consumer uses his/her repair rights,
    • If the product breaks down for 4 times in a year or 6 times in warranty duration and these problems effects main purpose of the product. (starting from delivery time during warranty.)
    • Exceeding the maximum time required for repair,
    • In the event that the service station is not available, if it is determined that the repair of the defect is not possible with the report prepared (in order) by one of the seller, dealer, agency, representative, importer or manufacturer, a refund or a price discount at the rate of defect can be requested.
19. The customer can make complaints and appeals to consumer courts or consumer arbitration committees.
20. The warranty document must be kept by the customer during the warranty period. If the document is lost, a second document will not be issued. In case of loss, repair and replacement of devices and apparatus will be made for a fee.

WARRANTY CERTIFICATE

Manufacturer

• Title: ISIPARK İÇ DIŞ TİC. A.Ş.
• Adress: Fatih Mah. 1188 Sk. No:13/A Sarnıç Gaziemir İzmir-TÜRKİYE
• Tel: +90 (232) 457 99 50
• Fax: +90 (232) 457 91 22
• E-mail: generallife@generallife.com.tr
• Authorized Signature:
• Company Stamp:
• Product Type: Digital Room Thermostat Brand: GENERAL Life
• Model: MITRA 230S RF
• Warranty Period: 5 Years
• Max. Time to Repair: 20 Days Bandrol and Serial Number:

ISIPARK reserves the rights of changing product specifications and user manuals.

• For all changes, you may visit generallife.com.tr

References

• Oda Termostatı, Fan Coil Termostatı - GENERAL Life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>