BRESSER 7000016000000 Climate Monitor Instruction Manual

June 4, 2024
BRESSER

BRESSER -logoBRESSER 7000016000000 Climate Monitor- Weather Station
Climate Monitor
Instruction manual

Imprint

Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
www.bresser.de
For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Service” in this documentation. We ask for your understanding that unsolicited returns cannot be processed.
Errors and technical changes excepted.
© 2022 Bresser GmbH
All rights reserved.
The reproduction of this documentation – even in extracts in any form (e.g. photocopy, print, etc.) as well as the  use and distribution by means of electronic systems (e.g. image
file, website, etc.) without the prior written permission of the manufacturer is prohibited.
The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark and/or patent law in Germany, the
European Union and/or other countries.

Validity note

This documentation is valid for the products with the following article numbers:
7000016000000
Manual version: 0522
Manual designation:
Manual_7000016000000_Climate-Monitor_ende_BRESSER_v052022a
Always provide information when requesting service.

About this Instruction Manual

NOTICE

These operating instructions are to be considered a component of the device.
Read the safety instructions and the operating manual carefully before using this device.
Keep this instruction manual in a safe place for future reference. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/  user of the product.

General safety instructions

DANGER
Danger of suffocation!
Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you observe the following safety information.

  • Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
  • This product contains small parts that can be swallowed by children! Choking hazard!

DANGER
Risk of an electric shock!
**** This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal injuries. It is therefore imperative that you observe the following safety information.

  • Never leave children unattended when handling the device! Follow the instructions carefully and do not attempt to power this device with anything other than power sources recommended in this instruction manual, otherwise, there is a danger of an electric shock!

DANGER
Explosion hazard!
Improper use of this product may result in fire. It is essential that you observe the following safety information in order to avoid fires.

  • Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire! Excessive heat or improper handling could trigger a short circuit, a fire, or an explosion!

NOTICE
Danger of material damage!
**** Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.

  • Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary.
  • Do not immerse the unit in the water!
  • Do not expose the device to impacts, vibrations, dust, constant high temperatures or excessive humidity. This can result in malfunctions, short-circuits, or damage to the batteries and components.
  • Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or types or with different capacities. Re- move batteries from the device if it is not to be used for a longer period of time!
  • Do not use rechargeable batteries (accumulators).

NOTICE
Risk of voltage damage!
The manufacturer is not liable for damage related to improperly installed batteries!

Parts overview and scope of delivery

BRESSER 7000016000000 Climate Monitor-Parts

Illustration 1: All parts of the thermo-hygro sensor

1 Housing 2 Display
3 RCC button 4 [DOWN] button
5 Wall mount fixture 6 [UP] button
7 [SET] button 8 Ventilation slots
9 Stand, fold-out 10 Battery compartments with cover

Scope of delivery:
Thermo-hygrometer (A)
Also required (not included in delivery): 1 x AAA/LR03 type battery

Screen display

BRESSER 7000016000000 Climate Monitor-Parts 1

11 AM/PM information (only in 12-hour time mode)
13 Temperature (°C or °F selectable)
15 Symbol for daylight saving time (only for summertime)| 17 RCC symbol (only when the radio-controlled clock is enabled) 12 Climate indicator
14 Humidity ( in % )
16 Time (hours: minutes)
---|---

Setting up power supply

  1. Remove the battery compartment cover.
  2. Insert the battery(ies) into the battery compartment. Ensure that the battery polarity (+/-) is correct.
  3. Replace the battery compartment cover.

Automatic time setting

After the power has been restored, the unit automatically searches for the radio signal. It takes approximately 3-8 minutes for this process to be completed.
If the radio signal is correctly received, the date and time are set automatically and the reception symbol is displayed.
If no radio signal has been received, proceed as follows:

  1. Press the RCC button for approx. 2 seconds to initiate the reception of the radio signal again.
  2. If still no radio signal is received, the time must be set manually.
  3. To deactivate automatic reception of the time, press and hold the RCC key for approx. 3 seconds.

Manual time adjustment

  1. In normal display mode, press the SET button for about 3 seconds to enter the time settings mode.
  2. Digits to be set are flashing.
  3. Press the UP or DOWN button to change the value.
  4. Press the SET button to confirm and switch to the next setting.
  5. Sequence of the settings: Time offset > Hours > Minutes > Year > Month > Day
  6. Finally, press the SET button to save the settings and exit settings mode.
    NOTICE! For more information on the time display in 12- or 24-hour mode, see the chapter “Changing the display”.

Automatic measurement display

Once the power is established, the readings for the current environment are displayed on the unit.

Clima indicator

  1. DRY: dry (humidity <40%)
  2. COMFORT: Optimal (humidity between 40% and 70%)
  3. WET: Humid (humidity >70%)

The climate indicator is a visual display based on air temperature and humidity to determine the level of comfort.
Note:

  • The comfort display may vary at the same temperature, depending on the humidity.

Display change

  • In normal display mode, press the SET button to switch between time and date.
  • In normal display mode, press the DOWN button to toggle between °C and °F when displaying the temperature unit.
  • In the normal display mode, press the UP key to switch between the 12-hour and 24-hour time display.

Disposal

Dispose of the packaging materials properly, according to their types, such as paper or cardboard.
Contact your local waste-disposal service or environmental authority for information on the proper disposal.

Do not dispose of electronic devices in the household garbage! According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner.

Batteries and rechargeable batteries must not be dis- posed with household waste. You are legally obliged to return used batteries and accumulators and can return the  batteries after use either in our sales outlet or in the immediate vicinity (e.g. in the trade or in municipal collection points) free of charge.
Batteries and accumulators are marked with a crossed-out dustbin and the chemical symbol of the pollutant, “Cd” stands for cadmium, “Hg” stands for mercury and “Pb” stands for lead.

Warranty

The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.bresser.de/warranty_terms.

EC declaration of conformity

A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. The full text of the EC declaration of conformity is available at the following Internet address: www.bresser.de/download/7000016000000/CE/7000016000000_CE.pdf

UKCA Declaration of Conformity

Bresser GmbH has issued a “Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. The full text of the UKCA declaration of  conformity is available at the following internet address: www.bresser.de/download/7000016000000/UKCA/7000016000000_UKCA.pdf
Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain

Technical data

Power supply: 1x AAA/LR03 battery
Temperature unit: °C or °F are selectable
Temperature display range: -9.9°C to +50°C
Humidity display range: rH 1% to 99%

https://www.bresser.de/P7000016000000

WARRANTY

www.bresser.de/warranty_terms

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BRESSER User Manuals

Related Manuals