ProtoArc EM12 Programmable Mouse User Manual
- June 13, 2024
- ProtoArc
Table of Contents
ProtoArc EM12 Programmable Mouse User Manual
By Default
A Left Button
B. Right Button
C. Forward
D. Backward
E. Disabled
F. Disabled
G. Middle buntton
H. DPI Switch Button’
I. Charging/low battery indicator
J. Power Switch
K. USB Receiver
*All buttons are macro-enabled
Product Parameters
- DPL: 800-1200(default)-1600-2000-2400
- DPI Return rate: 250Hz
- Operating voltage: 3.7V
- Working current: <10mA
- Working distance: 10m / 32 ft
- Mouse button life : 3 million times
- Mouse size: 117.3×71.3×39.5mm/4.6×2.8×1.6″
- Mouse weight: 55g + 5g / 1.9oz
- System interfac e: PC available USB interface
Power prompt
Charging: indicator light is on in blue while charging, and turns off
when fully charged.
Low Battery: indicator light fash every second in red.
Sleep Mode: the mouse will auto-sleep after 15 minutes without any
activity, press any button to wake the mouse.
Start the installation application
Install the mouse:
Remove the receiver from the bottom of the mouse, plug it directly into the USB port of the device, turn on the on/off button, the mouse is ready to use.
How To Install Driver:
Please visit our website at ( https://www.protoarc.com).
Go to Menu–Support–Download.
Find and download the driver for ProtoArc EM12, then unzip the downloaded driver and double click to run (the driver installation is only applicable to windows system).
Driver main interface:
Button Settings:
Click the desired button customization in the left panel and select a new
function from the drop-down menu to use it directly.
Mouse settings:
Movement speed adjustment
- Click “Improve pointer percision”
- Adjust the mouse movement speed
- Adjust the scroll wheel movement speed
- Adjust the speed of double click.
Return rate adjustment:
Adjustable mouse return rate: 152Hz-250Hz-500Hz.
DPI settings:
5 differrent levels of DPI can be adjusted to the most ideal state
Multimedia shortcuts and key combinations customization settings:
18 multimedia buttons can be used by your choice
Customizable combination of shortcut keys (click the desired key and then
enter the compound letter)
Macro settings:
- Click “New Macro” and customize the macro name.
- Click “Start Record” and enter your own definition and then click “Stop Record” and click “Save” to finish recording. You can record multiple macro definitions.
- Save the definition profile: Edit the name of the function you defined and save it on your computer.
- Export the definition profile: export the profile saved on the computer directly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>