Goldair GCPACWK Portable Air Conditioner Window Kit Instruction Manual
- June 4, 2024
- GOLDAIR
Table of Contents
Goldair GCPACWK Portable Air Conditioner Window Kit
Installation Instructions
Thank you for choosing this Goldair product. This kit includes:
- Material Window Seal
- 8m Velcro Tape
Please keep these instructions in a safe place for future reference.
Install the window seal in a window where the air conditioner is used. Ensure
the window is thoroughly cleaned and dry before installation.
Please refer to your portable air conditioner’s user manual for instructions
on how to operate the device and how to attach the hose.
Applying the velcro tape
- On a clean and dry window frame, attach the adhesive Velcro tape
- Install the selfadhesive Velcro tape all the way down to the bottom of the frame
- Cut the Velcro tape to size.
- Repeat the same steps on the window
Attaching the window seal
- Attach the window seal to the Velcro tape you applied on the window and frame
- Ensure that both sides are aligned as you attach to the entire frame
- Unzip the window seal and insert the hose
- Zip up the seal to secure the hose in place
You can cut the window seal to fit. Ensure you do not cut through the zip.
SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>