Volant VC0011 Aluminum Oil Catch Can W Bracket Instruction Manual

Volant VC0011 Aluminum Oil Catch Can W Bracket

Product Information

• Product Name: Volant Catch Can
• Compatible Vehicles: 2019+ Chevy Silverado / GMC Sierra, 2021+ Chevy Tahoe and Suburban / GMC Yukon and Yukon XL / Cadillac Escalade and Escalade ESV
• Engine Compatibility: 5.3L & 6.2L
• Kit Number: VC0011
• Manufacturer: Volant Performance
• Manufacturer Address: 140 Blaze Industrial Pkwy, Berea, OH 44017
• Manufacturer Contact: Toll Free: 1.800.486.0999,
  Fax: 440.891.1868,
  Website: www.volant.com

Product Usage Instructions

• Before beginning the installation process, review the enclosed instructions and ensure all parts are present according to the bill of materials.
• To activate your warranty, visit volant.com/warranty.
• Ensure the vehicle’s engine has cooled down before working on it.
• Always wear eye protection when working on a vehicle.
• If you have any questions or encounter any issues during installation, contact Volant Technical Support at 440.891.0999 or 800.486.0999.
• This product warranty does not cover damage or defects caused by misuse, accidents, negligence, alterations, faulty installation, or unauthorized repairs.
• Detailed color instructions are available at Volant.com by searching for the kit number.
• Volant recommends that the installation be performed by a qualified service center or professional installer with the necessary equipment, tools, and experienced personnel. However, if you choose to install it yourself, you may require an additional person.
• Recommended Tools & Supplies for installation are not mentioned in the given text.
• The bill of materials for the Volant Catch Can Kit (VC0011) includes the following parts
  • 3/8 NPT Barbed Elbow Fitting (Qty 2)
  • Volant Catch Can
  • Mounting Bracket
  • 10mm Quick Connect Fitting (Qty 2)
  • 4mm Button Head Screws (Qty 3)
  • Hose A
  • 3/8in x 10in
  • Hose B – 3/8in x 19in
  • M6 x 1mm Flange Nut
• If any part is missing, contact Volant Tech Support at 440.891.099 or Toll Free: 1.800.486.0999.
• If you are using an aftermarket air intake, you may need to determine how the PCV lines run compared to the Factory air intake.
• To install the Volant Catch Can on a 5.3L or 6.2L engine:
  • Locate the Factory PCV Line on the Driver side of the engine.
  • Release the Quick Connect fittings by pressing on the grey tabs and pulling.

Please note that the given text-extract does not provide complete installation instructions for the Volant Catch Can. For detailed installation guidance, refer to the enclosed instructions or visit Volant.com.

IMPORTANT!
WARRANTY AND INSTALLATION INSTRUCTIONS
Please Forward All Information to End Consumer
Be sure to review the enclosed instructions prior to beginning the installation process. If you have any questions about the enclosed parts or instructions, or if you encounter a problem during installation:
CALL TECHNICAL SUPPORT : 440.891.0999 or 800.486.0999
TO ACTIVATE YOUR WARRANTY, GO TO: volant.com/warranty
This warranty does not extend to damaged or defect in the finish of a product or to any product, that in the opinion of Volant Performance, has been misused, damaged by accident or negligence, altered, or modified in any way, faulty installation, or installed contrary to Volant installation instructions, or repaired by an unauthorized service facility.
Full warranty available on Volant.com

Color instructions are available at Volant.com. Search by kit number

Please take time to read and understand these installation instructions.
Volant recommends that the installation of this system be performed by a qualified service center or professional installer who has the necessary equipment, tools, and experienced personnel. However, if you decide to perform this installation yourself, the use of an additional person may be required.

WARNING: Never work on a hot engine bay. Allow time for the vehicle to cool.
Always wear eye protection when working on a vehicle.

Recommended Tools & Supplies 

• 10mm Socket & Ratchet or Wrench
• 11/16in Wrench
• 2.5mm Hex Driver

Parts

Please confirm that all parts are present according to the bill of materials before beginning the installation.

Bill of Materials

• 3/8” NPT Barbed Elbow Fitting (652190) (Qty 2)
• Volant Catch Can (652287)
• Mounting Bracket (652208PCB)
• 10mm Quick Connect Fitting (65198) (Qty 2)
• 4mm Button Head Screws (652187) (Qty 3)
• Hose A – 3/8in x 10in (53003-10)
• Hose B – 3/8in x 19in (53005-19)
• M6 x 1mm Flange Nut

If something is missing, call Volant Tech Support at 440.891.099 or Toll Free: 1.800.486.0999

If you are using an aftermarket air intake, you may need to determine how the PCV lines run compared to the Factory air intake.

Instructions

Volant Catch Can

• Locate the Factory PCV Line. It is located on the Driver side of the engine. Release the Quick Connect fittings by pressing on the grey tabs and pulling.

• Using an 11/16in wrench, install Barbed fittings. DO NOT OVER TIGHTEN!
  IMPORTANT: Volant recommends using thread sealant or PTFE tape on the barbed fittings to prevent any leaks.

• Using a 2.5mm Hex Wrench, snug the Button Head Screws through the Mounting Bracket and into the Catch Can.
  DO NOT FULLY TIGHTEN AT THIS TIME.

• Locate the Coolant Reservoir on the Driver side of the Engine bay, near the Firewall. Using a 10mm Socket & Ratchet or Wrench, loosen the screw circled.

• After the bolt is loosened, pull the Coolant Reservoir off the two studs on the firewall.

• Locate the provided Nut. Using a 10mm Socket & Ratchet or Wrench, attach the Volant Catch Can and Bracket to the Coolant Reservoir stud.

• After the Nut if tightened, reattach the Coolant Reservoir, reversing Steps 4 & 5.

• Route Hose A to the fitting located along the Intake Manifold and then attach it to the Barbed Fitting in Port A of the Catch Can.

• Route Hose B to the fitting located next to the Throttle Body and then attach it to the Barbed Fitting in Port B of the Catch Can.

• Make sure all Quick Connect fittings are secured in place and the hoses are pushed all the way over the barbed ends of the fittings. Fully tighten the hardware from Step 3.

Check that this Catch Can complies with your Federal, State and Local laws. We recommend saving your stock PCV line(s).

Before Road Testing

• Start engine, leaving the transmission in park and/or securing the parking brake.
• Make sure to look and listen for any unusual noises. Repair problems if needed.
• Once completed it will be necessary to check periodically, after a few heat cycles, for realignment and tightening of all connections.

Emptying Catch Can and Care
The Volant Catch Can will need to be emptied periodically. Volant recommends, at minimum, emptying at every oil change. When the Catch Can is full, the PCV line will operate normally, but the Catch Can will allow the oil and vapor to pass through.

• Hold the top of the Catch Can and Bracket firmly.
• Twist the bottom of the can counterclockwise (loosen) until is free of the top and bracket.
• Properly dispose of the oil and vapor residue.
• If the treads of the bottom are dry, apply some fresh oil or petroleum jelly to the threads. This will help with removing the bottom the next time.
•  Reinstall the bottom of the can while firmly holding the top and bracket.
  Caution: DO NOT OVER TIGHTEN. It will make removal difficult.

INSVC0011 140 Blaze Industrial Parkway, Berea, OH 44017
P: 440.891.0999
F : 440.891.1868 7 06/08/2023
techsupport@tmgperformance.com
www.volant.com

References

• Volant Performance Cold Air Intakes - Trucks, SUVs and Cars.
• Performance Exhaust Systems | Buy Cold Air Intake Kits, High-Performance Mufflers & Headers at CORSA PERFORMANCE
• Volant Performance Cold Air Intakes - Trucks, SUVs and Cars.
• Volant Performance Cold Air Intakes - Trucks, SUVs and Cars.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>