AMP RESEARCH 75135-01A Jeep Gladiator JT PowerStep Installation Guide
- June 13, 2024
- AMP RESEARCH
Table of Contents
AMP RESEARCH 75135-01A Jeep Gladiator JT PowerStep
Product Information
The product is an installation kit for the Jeep Gladiator JT model, specifically for the years 2020 to 2024. It is compatible with gas, diesel, and 4XE models. The AMP Part number for this kit is 75135-01A. The installation time is estimated to be between 3 to 5 hours and professional installation is recommended. The skill level required for installation is rated as 4 (experienced). The kit includes various tools and components necessary for installation. The product comes with a 5-Year Limited Warranty.
Product Usage Instructions
- Ensure you have all the required tools mentioned in the manual.
- Handle the product with care as indicated by the caution notice.
- Refer to the exploded view diagram to familiarize yourself with the components.
- Begin by installing the motor linkage assembly on both the driver and passenger sides. Follow the instructions provided in steps 1 and 2 of the manual, making sure to use the correct screws and washers. Torque the fasteners to 16 ft-lbs (22N-m).
- Next, install the wire harness, tube (installation tool), OBD module, OBD module extension, and controller XTA as per the instructions.
- Install the LED lamps and LED light brackets using the provided bolts and washers. Pay attention to the orientation of the nut plate insert with the raised portion facing the bolt.
- Proceed with mounting the step extrusion to the linkage assemblies. Align the T-nuts in the step assembly with the slots in the lower mounts of the linkage assemblies. Initially, fasten them loosely for adjustments. Align the step extrusion with the rear fender well and tighten the 4 socket cap screws using a 3/16 Allen wrench. Torque them to 10 ft-lbs (13.5N-m).
- Ensure all the components are securely installed and tightened.
For any further assistance or technical support, contact AMP Research at 1-888-983-2204 (Press 2) during their working hours, Monday to Friday, 7:00 AM to 5:00 PM PST. You can also visit their website at www.amp-research.com.
SKILL LEVEL
- 4= Experienced
TOOLS REQUIRED
- Safety goggles
- Measuring tape
- 10 mm socket
- 13 mm socket
- 1/2” socket
- Ratchet wrench and extension
- Wire crimpers
- Wire stripper/cutter
- 3/16” hex key wrench (Allen wrench)
- 4mm hex key wrench (Allen wrench )
- Electrical tape
- Weatherproof caulking (silicone sealer)
- Silicone spray
- Drill
- Drill bit 3/16”
OVERVIEW
EXPLODED VIEW
PARTS
INSTALLATION INSTURCTION
Thank you for your recent AMP Research Purchase. REGISTER YOUR PRODUCT TODAY FOR FASTER SERVICE & PRODUCT UPDATES
Please visit:www.amp-research.com/productregistration. or scan the QR Code
Product Registration Benefits:
- Ensure we have your purchase receipt and product info in our system which is required for warranty
- Faster and easier access to customer service and tech support in the unlikely event you need warranty or product support
- Registration helps us keep you up to date on product information and offers
To view other Amp Research products that may be offered for your vehicle.
Please visit: www.amp-research.com.
POWER-DEPLOYABLE RUNNING BOARDS OPERATION: AMP Research PowerStep running boards automatically move when the doors are opened to assist entering and exiting the vehicle.
- Automatic power deploy: The running boards will extend down and out when the doors are opened.
- Automatic power stow: The running boards will return to the stowed position when the doors are closed. There will be a 2-second delay before the running boards move to the stowed position.
Automatic stop:
- If an object is in the way of the moving running board, the running board will automatically stop.
- To reset, clear any obstruction, then simply open and close the door to resume normal operation.
- Manually set in the deployed (OUT) position for access to the roof:
- The running boards can be manually set in the deployed position by firmly holding the step down with your foot while at the same time closing the door. To resume normal operation, open and close the door.
- Maintenance: In adverse conditions, debris such as mud, dirt, and salt may become trapped in the running board mechanism, possibly leading to unwanted noise. If this occurs, manually set the running boards to the deployed position and flush the front and rear hinge arms with a high-pressure car wash wand.
- Avoid spraying the motors directly. After washing, apply silicone spray lubricant to the hinge pivot pins.
- Do not apply silicone, wax or protectants like Armor All® to the running board stepping surface.
- Caution! Keep hands away when the running board is in motion.
LIMITED WARRANTY
5-YEAR LIMITED WARRANTY
- AMP RESEARCH warrants this product to be free from defects in material and workmanship for FIVE (5) YEARS FROM
- DATE OF PURCHASE, provided there has been normal use and proper maintenance. This warranty applies to the original purchaser only. All remedies under this warranty are limited to the repair replacement of the product itself, or the repair or replacement of any component part thereof, found by the factory to be defective within the time period specified. The decision to repair or replace is wholly within the discretion of the manufacturer. for instructions.
- You must retain proof of purchase and submit a copy with any items returned for warranty work.
- Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid.
- Damage to our products caused by accidents, re, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty.
- ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
- Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
- FOR WARRANTY ISSUES WITH THIS PRODUCT PLEASE CALL AMP RESEARCH TECH SUPPORT 1-888-983-2204
WARNING
Be sure to read and precisely follow the provided instructions when installing
this product. Failure to do so could place the vehicle occupants in a
potentially dangerous situation. After installing or reinstalling, re-check to
insure that the product is properly installed. The material that your product
is made from can be recycled. Please also consider recycling the packaging
that your product came in.
AMP RESEARCH TECH SUPPORT
1-888-983-2204 (Press 2) Monday –
Friday, 7:00 AM – 5:00 PM PST Invented, engineered and manufactured
exclusively by AMP Research in the USA. May be covered by one OR MORE of the
following patents: 6,641,158; 6,830,257; 6,834,875; 6,938,909; 7,055,839;
7,380,807; 7,413,204; 7,398,985; 7,584,975; 7,566,064; 7,487,986; 8,157,277;
8,408,571; 9,302,626; 9,561,751; 10,053,017; CA2463717 ©2023 AMP Research. All
rights reserved. Printed in USA. www.amp-research.com. IM75135 rev 08.21.23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>