MBJ Imaging A6 Rails Clamp with Mounting Instructions

June 13, 2024
MBJ Imaging

MBJ Imaging A6 Rails Clamp with Mounting

Filter holder Mounting with clamp rails

MBJ-Imaging-A6-Rails-Clamp-with-Mounting-FIG-1

  1. Protective Foils are marked with a sticker. Please handle foils and cover plates with  care – avoid scratches and touching of thesurface. We suggest to wear gloves.
  2. Attach one clamp rail loosely with screws.
  3. Insert optical foil. (If more than 1 foil is used please refer to the schematic overview to the right)
  4. Insert cover plate.
  5. Attach the second clamp rail.
  6. Hand-tighten screws, lightly pressing down the clamp rails onto the cover plate.

Cover plate

  • Polarizer
  • Collimator
  • Diffusor
  • LED

Mounting with clamps

MBJ-Imaging-A6-Rails-Clamp-with-Mounting-FIG-2

  1. Protective Foils are marked with a sticker.
  2. Please handle foils and cover plates with care – avoid scratches and touching of the surface. We suggest to wear gloves.
  3. Place filter on the luminous area of the lighting. (if more than 1 foil is used please refer to schematic overview to the right)
  4. Place the cover plate on top.
  5. Attach clamps with screws. The back of the lighting has small indentions indicating where thescrews need to be placed.
  6. Tighten screws, hand tight only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals