deco BE65 BE11000 Whole Home Mesh Wi-Fi 7 System User Guide

June 13, 2024
deco

deco BE65 BE11000 Whole Home Mesh Wi-Fi 7 System

deco-BE65-BE11000-Whole-Home-Mesh-Wi-Fi-7-System-
product

Product Information

  • Product Name: BE11000 Whole Home Mesh Wi-Fi 7 System
  • Model: Deco BE65
  • Connectivity: Ultimate 10 Gbps
  • Features: The Deco Whole Home Mesh Wi-Fi 7 System provides seamless coverage and high-speed connectivity. It supports MU-MIMO technology, IoT compatibility, and seamless roaming. The system comes with HomeShield, which includes a Free Basic Plan for network security.
  • Appearance: Each Deco unit has an LED that changes color according to its status, a WPS button, four 2.5 Gbps WAN/LAN ports, a USB 3.0 port, a power slot, and a reset button.

Product Usage Instructions

  1. Locate the product label on the bottom of the Deco unit.
  2. Connect Deco to your modem or Ethernet outlet using the provided Ethernet cable.
  3. If you want to connect a USB storage device to Deco, plug it into the USB 3.0 port.
  4. Connect Deco to a power socket using the provided power adapter.
  5. To start the WPS process, press the WPS button on Deco and immediately press the WPS button on your client device.
  6. To reset Deco to factory default settings, press and hold the reset button for 1 second, then release. A successful reset is indicated by the light changing from pulsing yellow to solid yellow.
  7. Download the TP-Link Deco app on your iOS or Android device.
  8. Follow the instructions in the app to set up your Deco network.

Note: For detailed setup instructions, refer to the user guide provided with the product.

About This Guide

This guide provides a brief introduction to BE11000 Whole Home Mesh Wi-Fi 7 System and regulatory information. Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Deco experience.

Conventions
In this guide, the following conventions are used:

Convention Description
Deco Stands for Deco Whole Home Mesh Wi-Fi System/ Unit.
Underline Hyperlinks are in teal and underlined. You can click to

redirect to a website or a specific section.

Teal

| Key information appears in teal, including management page text such as menus, items, buttons and so on.
Note:| Ignoring this type of note might result in a malfunction or damage to the device.
Tips:| Indicates important information that helps you make better use of your device.

More Info

Speed/Coverage/Device Quantity Disclaimer
Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.

  • MU-MIMO Disclaimer
    Use of MU-MIMO requires clients to also support MU-MIMO.

  • IoT Compatibility Disclaimer
    IoT compatibility refers only to smart devices that can be controlled via the Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi use.

  • Seamless Roaming Disclaimer
    Clients need to support 802.11k/v/r and may require additional setup. Performance may vary depending on the client device.

  • HomeShield Disclaimer
    HomeShield includes the Free Basic Plan. Fees apply for the Pro Plan. Visit tp-link.com/homeshield for more information.

Appearance

Each Deco has an LED that changes color according to its status, a WPS button, four 2.5 Gbps WAN/LAN ports, a USB 3.0 port, a power slot, and a Reset button.

See the explanation below:
Tip: The product label can be found at the bottom of the product.

deco-BE65-BE11000-Whole-Home-Mesh-Wi-Fi-7-System-fig-
\(1\)

Set Up Your Deco

First let’s start by setting up the Deco network. Get the TP-Link Deco app for iOS or Android, then follow the app to walk through the setup.

  1. Get the Deco app
    Scan the QR code below or go to Google Play or the App Store to download the Deco app. Install the app on your Android or iOS smartphone or tablet.

  2. Log in or sign up with TP-Link ID
    Open the app and log in with your TP-Link ID. If you don’t have a TP-Link ID, create one first.
    Note: If you forgot your login password, tap Forgot Password?. The app will help you reset your password.

  3. Select your Deco model
    Search for and select your Deco model. If you have more than one Deco model, tap the question below the search box to check how to maximize the overall network.

  4. Plug in your Deco

    • Power off your modem. Connect your Deco to the modem and power them both on.
    • If you don’t have a modem, connect your Deco directly to the Ethernet outlet.
  5. Wait until Deco’s LED pulses blue
    Wait until your Deco’s LED pulses blue, then your phone/tablet will connect to the Deco’s default Wi-Fi automatically.

  6. Specify your Deco’s location
    Select or custom a location for your Deco. The location will be used as the name of your Deco.

  7. Connect your Deco to the internet
    Select the internet connection type and enter the information. If you are not sure, contact your internet service provider.

  8. Create your Wi-Fi network
    Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi.

  9. Create your MLO network
    Set a network name and a password. The MLO network enables Wi-Fi 7 clients to connect to multiple bands simultaneously.

  10. Keep your Deco up-to-date
    Set auto update time. This allows your Deco to automatically update to the latest firmware which provides better network experience.

  11. Connect to your Wi-Fi network
    Connect your phone/tablet to the Deco’s Wi-Fi to continue the setup.

  12. Setup complete
    Your Deco network is now up. You can connect your devices to the Deco network.

  13. Add more Decos
    Plug in the other included Decos, and they will automatically join the network within 2 minutes.

Troubleshooting

Solutions to common problems during setup or use are provided here for reference. Follow the steps and the provided link below to diagnose and solve problems you might experience with your Deco. If problems still exist, contact us: https://www.tp-link.com/support.

Authentication

FCC Compliance Information Statement
  • Product Name: BE11000 Whole Home Mesh Wi-Fi 7 System
  • Model Number: Deco BE65
  • Component Name I.T.E Power Supply
  • Model T120330-2B4

Responsible party:

TP-Link USA Corporation

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

  • This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
  • To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
  • FCC regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.
  • We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

FCC Compliance Information Statement

  • Product Name: I.T.E POWER SUPPLY
  • Model Number: T120330-2B4

Responsible party:

TP-Link USA Corporation

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution:

  • The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
  • DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.

ISED regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Safety Information

  • Keep the device away from water, fire, humidity or hot environments.
  • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
  • Do not use damaged charger or USB cable to charge the device.
  • Do not use any other chargers than those recommended.
  • Do not use the device where wireless devices are not allowed.
  • Adapter shall be installed near the equipment and shall be easily accessible.
  • Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
  • Operating Temperature: 0°C~40°C (32°F~104°F)
  • This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label
Symbol Explanation
DC Voltage
Alternating current
Caution
Operator’s manual
Indoor use only
Polarity of d.c. power connector
Energy efficiency marking
Class II equipment
RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

https://www.tp-link.com.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

deco User Manuals

Related Manuals