1MORE S50 Wireless Fit Open Earbuds User Guide
- June 13, 2024
- 1more
Table of Contents
1MORE Fit Open Earbuds S50 User Guide
S50 Wireless Fit Open Earbuds
| Answer” Double-tap
End call/Decline: press and hold
Voice control on cell phone
Tap 3 times when Bluetooth is on and not on a phone call
---|---
| Play/Pause, Double-tap
- To change a song or volume control, please set up on the IMORE MUSIC APP or operate on the paired mobile phone/device
- Above functions are available for either earbud in individual or stereo mode. Custom settings are available on the APP.
- Above functions may vary with different devices.
Smart Playback
Automatically pause music when taking out your headphones, and resume once you
put them back on.
To turn off Auto-Play, connect the headphones to the IMORE MUSIC App and
change in the settings.
Extra Functions
- If only one earbud can be connected to the device, please put the two earbuds back into the case and triple tap the pairing button, then click ‘IMORE Fit” in the device pairing list to connect to your device.
- Clear The Pairing Records: Put both Left and Right earbuds into the case, press and hold the pairing button for 8 seconds, the pairing records will be cleared
- OTA Firmware Update: It can be synchronously upgraded via the 1MORE MUSIC APP while the Left and Right earbuds are connected to each other with at least 50% battery Functions of the 1MORE MUSIC APP may vary with different devices or operating systems. For more details, please contact our customer service.
1MORE (1) Year Limited Warranty
1MORE warrants to the original retail purchaser that this product is to be
free from defective materials and workmanship for a period of one year from
the date of purchase if it is properly used and maintained. If this product
proves defective in either material or workmanship, 1MORE, at its option, will
(a) repair the product with new or refurbished parts, or (b) replace the
product with an equivalent new or refurbished product, at no charge for parts
or labor. If the product model is no longer available and cannot be repaired
effectively or replaced with an identical model, 1MORE at its sole option may
replace the unit with a current model of equal or greater value. In some
cases. modification to the mounting surface may be required where a new model
is substituted. 1MORE assumes no responsibility or liability for such
modification. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF THIS
WARRANTY, PLEASE RETURN TO THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER
SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT
WITH AN EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details, including but
not limited to a receipt or sales invoice. Return shipping for
exchanges/repairs is the sole responsibility of the original retail purchaser.
Limitations:
- This limited warranty does not cover the failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
- This limited warranty does not cover cosmetic damage. including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product
- This limited warranty Is null and void for products not used in accordance with 1MORE’s instructions.
- This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an AUTHORIZED dealer.
- This limited warranty terminates if you sell or otherwise transfer this product to another party.
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your satisfaction. If you would like more details on this product or any of our other products, please visit us online by scanning the QR code. Go to www.lmore.com and sign up for VIP, and 1MORE will treat you like one.
Tips
- Please read this instruction manual carefully and retain for future reference.
- Please fully charge the battery before first use.
- If the headphones have been unused for more than 3 months, we recommend that you charge them. This will improve battery capacity.
- Only use chargers that are FCC (Federal Communications Commission) approved.
- In dry environments, static electricity may numb your ear. This is not related to the quality of the product.
Safety Information
- Never disassemble the headphones. There are no user-serviceable parts inside
- Do not expose the headphones to temperatures below 32 °F (0 °C) or temperatures above 113 °F (45 °C).
- Do not use headphones in a thunderstorm storm. This could prevent the headphones from wor<ing properly. and also increase your chance of being electrically shocked.
- Do not use oil or any volatile liquid to clean this product.
- Do not listen to high volumes for extended periods.
- Do not use headphones in traffic. Do not use the headphones any time it would be dangerous to be unaware of noises around you.
- Adult supervision is required for children of age 6 and under.
FCC
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types EF906 has also been tested against this SAR limit.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
FAQ
-
Why the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes. -
Why the headphones cannot connect to my cellphone, or take a long time to connect?
If headphones cannot pair normally when power on. Open the case, triple tap the pairing button to initial searching for Left & Right pairing, and then click “WORE Fit” in the device pairing list,
To pair the headphones to a new device, simply place them into the charging case and triple tap the pairing button. Then click 1MORE Fit” in the new device pairing list to connect. -
Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Media Audio” option is on -
Why there is no sound from the headphones while making phone calls after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Phone Audio” option is on. -
Why the Bluetooth connection Is not stable and causes some Interruptions?
Try shortening the distance between your headphones and device. Avoid solid barriers in between
Please keep away from strong interference sources, such as Wi-Fi and GPRS.
Please make sure the Bluetooth antenna of your device is not blocked -
Why some control functions do not match those In the manual while using third party music/video player Apps?
Your operating system and the third party music/video player apps may have different settings for the control functions. We recommend that you use the music/video player apps that your device has originally provided.
For more detailed product =AO& please visit the product support section under lmore.com
WEEE
All products bearing this symool are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the
environment and human health. Please contact the installer or local
authorities for more information about the location as well as terms and
conditions of such collection points. Your 1MORE retailer will advise you of
the correct way of disposal in your country
1MORE MUSIC APP
For users outside mainland China, please download the 1MORE MUSIC APP for
product upgrades and additional features
- APP UI in user guide may vary and for reference only, please refer to UI on device
Manufacturer: Tiinlab Corporation
Add: No. 3333, Liuxian Avenue, lower A, 35th Floor.
Tanglang City Nanshan D strict, Shenzhen, China 