1MORE ComfoBuds Pro True Wireless In-Ear Headphones User Guide
- June 5, 2024
- 1more
Table of Contents
1MORE ComfoBuds Pro True Wireless In-Ear Headphones
Inside The Box
Product Overview
Replace
Power
Bluetooth Pairing To The Device
Battery Status Display in 1MORE MUSIC APP
Battery status of headphones and charging case will be displayed in 1MORE
MUSIC APP.
Touch Controls
Phone calls and music can be controlled by tapping on the Touch Control area
of the headphone.
Auto Pause/Play:
Playback auto pause when detaching from ears, auto play when putting on again
ANC-Strong, ANC-Mild, WNR and Pass-through Modes
For different listening modes, you could touch and hold on the stem of the
headphone to switch.
Default setup:
ANC-Strong (turn on/off on Left headphone)
Pass-through (turn on/off on Right headphone)
ANC-Mild and WNR (Wind Noise Resistance) are included in 1MORE MUSIC APP for
personal setup.
- ANC-Strong: suitable for aviation, highspeed train, metro etc.
- ANC-Mild: suitable for noisy daily circumstances, such as mall, café, streets etc.
- WNR Mode: suitable for outdoor windy environment.
- Pass-through Mode: Let’s in environmental sounds so you don’t need to take out the earbuds to hear what is going on around you.
Extra Functions
-
If headphones cannot pair normally when power on. Open the case, quickly click the pairing button in the case for 3 times to initial searching for Left & Right pairing.
-
To unpair the cellphone:
Put both L & R into the case, and then press and hold the pairing button in the case for 8 seconds. -
OTA Firmware Update: can be done synchronously with 1MORE Assistant APP when Left and Right headphones Bluetooth paired to each other.
Functions of 1MORE MUSIC APP may vary with different cellphones or operating systems. For more details, please contact our customer service.
1MORE (1) Year Limited Warranty
1MORE Inc., (1MORE) warrants to the original retail purchaser that this
product is to be free from defective materials and workmanship for a period of
one year from the date of purchase, if it is properly used and maintained. If
this product proves defective in either material or workmanship, 1MORE, at its
option, will (a) repair the product, or (b) replace the product, at no charge
for parts or labor. If the product model is no longer available and cannot be
repaired effectively or replaced with an identical model, 1MORE at its sole
option may replace the unit with a current model of equal or greater value. In
some cases, modification to the mounting surface may be required where a new
model is substituted. 1MORE assumes no responsibility or liability for such
modification. To obtain a repair or replacement under the terms of this
warranty, please return to dealer first, if possible, and the dealer will
direct you accordingly for repairs or replacement. You will be required to
submit a copy of the original receipt. Return shipping for exchanges/repairs
is the sole responsibility of the original retail purchaser.
Limitations:
- This limited warranty does not cover failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
- This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
- This limited warranty is null and void for products not used in accordance with 1MORE’s instructions.
- This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an authorized dealer.
- This limited warranty terminates if you sell or otherwise transfer this product to another party.
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we
value your satisfaction. If you would like more details on this product or any
of our other products, please visit us online by scanning the QR code. Go to
www.1more.com and sign up for VIP, and 1MORE will
treat you like one.
Tips
- Please read this instruction manual carefully and retain for future reference.
- Please fully charge the battery before first use.
- If the headphones have been unused for more than 3 months, we recommend that you charge them. This will improve battery capacity.
- Only use charging cables and adapters that are FCC (Federal Communications Commission) approved.
- In dry environments, static electricity may numb your ear. This is not related to the quality of the product.
Safety Information
- Never disassemble the headphones. There are no user-serviceable parts inside.
- Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above 113 °F (45 °C).
- Do not use the headphones in a thunderstorm storm. This could prevent the headphones from working properly, and also increase your chance of being electrically shocked.
- Do not use oil or any volatile liquid to clean this product.
- Do not listen at high volumes for extended periods of time.
- Do not use the headphones in traffic. Do not use the headphones any time it would be dangerous to be unaware of noises around you.
- Adult supervision is required for children of age 6 and under.
- If you don’t feel comfortable after wearing the headphones, please refer to an aurist for advice on whether in-ear headphones are suitable for you.
FAQ
-
Why the headphones cannot be turned on?
Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes. -
Why the headphones cannot connect to my cellphone, or take a long time to connect?
-
If the earbuds cannot pair to one another, and only one earbud will pair with your cellphone, then put both buds back into the charging case and quickly press the pairing button 3 times, click the device name, they should now pair correctly to the phone.
-
To pair the earbuds to a new cellphone, simply place them into the charging case and depress the pairing button for 2 seconds. Then click the new device name and pair with the new cellphone.
-
Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Media Audio” option is on. -
Why there is no sound from the headphones while making phone calls after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Phone Audio” option is on. -
Why the Bluetooth connection is not stable and causes some interruptions?
-
Try shortening the distance between your headphones and device. Avoid solid barriers in between.
-
Please keep away from strong interference sources, such as Wi-Fi and GPRS.
-
Please make sure the Bluetooth antenna of your device is not blocked.
-
Why some control functions do not match those in the manual while using third party music/video player Apps?
Your operating system and the third-party music/video player apps may have different settings for the in-line remote control functions. We recommend that you use the music/video player apps that your device has originally provided. -
I turned the headphones up to the maximum volume, but why the actual volume still sounds low?
In different operating systems, especially some Android systems, the headphones and your device have separate volume control systems. Please adjust the volume controls on both the device and the headphones according to your preference.
WEEE
Electrical and electronic equipment, parts and batteries marked with this
symbol must not be disposed of with normal household wastage, it must be
collected and disposed of separately
to protect the environment.
Your 1MORE retailer will advise you of the correct way of disposal in your
country.
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine,
fire or the like.
CE
Declaration of Conformity Hereby, Tiinlab Acoustic Technology Limited declares
that the radio equipment type 1MORE ComfoBuds Pro True Wireless In-Ear
Headphones ES901 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet
address:www.1more.com
RF exposure information: The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable exposure condition
without restriction. Radiation Exposure Statement Power is so low that no RF
exposure calculation is needed.
Declaration for EU Compliance
Operation Frequency/Max. EIRP: 2400-2483.5MHz, 9dBm.
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard
(such as catching fire, explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas; and
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas. The symbol indicates DC
voltage.
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/ EU in order to be recycled or
dismantled to minimize its impact on the environment. User has the choice to
give his product to a competent recycling organization or to the retailer when
he buys a new electrical or electronic equipment.
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
FCC
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device has also been tested against this SAR limit. This device was tested for
typical body-worn operations with the back of the handset kept 0mm from the
body. To maintain compliance with FCC RF exposure requirements, use
accessories that maintain a 0mm separation distance between the user’s body
and the back of the handset. The use of belt clips, holsters and similar
accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changesto this equipment.
Such modifications or changes could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier:
Trade Name: 1MORE
Model No. : ES901
Responsible Party – U.S. Contact Information
1MORE USA, Inc.
Address: 10225 Barnes Canyon Road, Suite A202, San Diego, California,
92121 Tel: 1-855-551-6673
E-Mail: [email protected]
IC Statement
This device has been tested for compliance with IC SAR values at a typical operating near the body. To ensure that RF exposure levels below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 0 cm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do not meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them.
Model: ES901
Headphone Weight : 5.2 g
Case Weight : 40 g
Product Weight : 50.4 g
Headphone Size: 4 2 × 23.95 × 20.93 mm Case Size: 80 × 37.5 × 30 mm
Headphone Battery Capacity: 50 mAh Case Battery Capacity: 450 mAh Headphone
Charging Time: 1h
Case Charging Time : 2h
Playtime* (ANC On):
Headphones Fully Charged: 5h Headphones & Case Fully Charged: 20h
Playtime* (ANC Off):
Headphone Fully Charged: 7h Headphones & Case Fully Charged: 28h
Impedance: 32 Ω
Wireless Range : 10 m
Bluetooth: Bluetooth® 5.0
Bluetooth Protocol: HFP / A2DP / AVRCP Input: 5V 1A
Working Temperature : 0 ℃ ~ 45 ℃Frequency Band: 2.400 GHz ~ 2.4835 GHz
The specifications are acquired from laboratory-tested data.
The playback time, tested under the laboratory condition of AAC format and 50%
volume, may vary with different device setting, environments, usage and other
factors.
Manufacturer: Twinlab Acoustic Technology Limited
Address: Tianliao Building 1403, Zone A Tianliao Industrial Park, Taoyuan
Str.,
Nanshan Dist., Shenzhen, P.R. China
Made in China