1MORE ES903 Aero Spatial Audio Noise Cancelling Earphone User Guide
- June 3, 2024
- 1more
Table of Contents
1MORE ES903 Aero Spatial Audio Noise Cancelling Earphone
lMORE MUSIC APP
For users outside mainland China, please download the 1MORE MUSIC APP for
product upgrades and additional features.
‘” APP UI in u:ser guide may 1o”ary and for reference only, please refer to UI
on device.
- Above functions may vary with different devices.
- Above functions are available for either earbud in individual or stereo mode. Custom setup is available on the APP.
- The default setting of the headphones is “ANC Off'”, long press the touch control area of the earbuds to switch between “ANC-Off”, “ANG-Strong” and “Pass-through”.
- ANC Mild”, “WNR (Wind Noise Resistance), ‘”ANC-Adaptive” options are available via 1 MORE MUSIC APP.
- Once the listening mode has been set up in the APP, they will be memorized by the headphones allowing you to switch modes ba5ed on your settings
Real-time Spatial Audio
With in-inbuilt head-tracking technology, the Real-time Spatial Audio function
creates a new level of immersed listening. It is compatible with different OS
and devices without limitation of audio formats.
Available via APP.
Extra Functions
- If only one earbud can be connected to the device. please put the two earbuds back into the case and triple tap the pairing button, then click “1MOAE Aem1 1 in the device pairing list to connect to your device.
- Clear The Pairing Records: Put both Left and Right earbuds into the case, press and hold the pairing button for 8 seconds the pairing records will be cleared.
- OTA Firmware Update: It can be synchronously upgraded via the l MORE MUSIC APP while the Left and Right earbuds are connected to each other with at least 50% battery.
- Functions of the IM□RE MUSIC APP may vary with devices or operating systems. Fer more details:,
1 MORE (1) Year Limited Warranty
MORE warrants to the original retail purchased that this product is to be free from defective materials and workmanship for a period of one year from the date of purchase if it is properly used and maintained. If this product proves defective in either material or workmanship, 1MORE, at its option. will (a) repair the. product with r.ew or refurbished parts. or (b) replace the product with an equivalent new or refurbished product, no Charge for parts or labor_ If the product mooe1 is no longer available and cannot be repaired effectively or replaced with an identical model, l MORE at its sole option may replace the unit with a current model of equal or greater value. In some cases, modification to the mounting surface may be required where a new model is substituted. l MORE assumes no responsibility or liability for such modification. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF THIS WARRANTY. PLEASE RETURN TO THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT WITH AN EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details. Including but not limited to a receipt or sales invoice Return shipping for exchanges is the sole responsibility of the Original fetial purchaser.
Limitations:
- This limited warranty does not cover the failure of the product resulting tram improper installation, misuse, abuse, accident. ne9lect, mishandling, or wear from ordinary use or environmental deterioration.
- This limited warranty does not cover cosmetic damage, including paint damage, or c:onseguential damage to other components or premises which may result for any reason from the failure of the product.
- This limited warranty ·1s null and void for products not used in accordance with IMORE’s instructions.
- This limited warranty is null and void for products: with altered or missing serial numbers und for products not purchased from an AUTHORIZED dealer.
- This limited warranty terminates if you sell or otherwise transfer this product to another party.
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At lMORE, we
value your satisfaction. If you would like more details on this product or any
of our other products, please
visit us online by scanning the QR code. Go to www.lmore.com and sign up for
VIP, and lMORE will treat you like one.
Tips
- Please read this instruction manual cilrefully and retain for future reference.
- Please fully charge the battery before first use
- If the headphones have been unused for more than 3 months, we recommend that you charge them. This wltl Improve battery capaclty.
- Only use chargers that are FCC (Federal Communications Commission) approved.
- In dry environments, static electret may numb your ear. This is not related to the quality of the product.
Safety Information
- Never disassemble the headphones. There are no user-serviceable parts inside.
- Do not expose the headphones to temperatures below 32 “F (0 °C) or temperatures above 113 Of (45 °C).
- Do not use headphones in a thunderstorm .storm. This could prevent the headphones from working properly, and also increase ycur chance of being electrically shocked.
- Do not use oil or any volatile liquid to clean this product.
- Do not listen to high volumes for extended periods.
- Do not use headphones in traffic. Do not use the headphones any time it would be dangerous to be unaware of noises around you.
- Adult supervision is required for children of age 6 and under.
- If you don’t feel comfortable after wearing the headphones. please refer to an aorist for advice on whether in-ear headphones are suitable for you
FCC
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or mollifications not expressly approved by the party responsible
for compliance could void th0 user’s authority to operate the equipment.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types ES903 hes also been tested against this SAR limit.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These Limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy end. If not Installed and used In accordance with the instructions. may cause harmful interference to radio communication. However. there is no guarantee that interference will not occur in a particular in5tallation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one Or’ more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment end receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FAQ
-
Why tile headphones cannot turned on?
Check if your’ headphones have enough battery life. If not. please change them for at least 30 minutes -
Why the headphones cannot connect to my cellphone, or take a long time to connect?
-
If headphones cannot pair normally when power on. Open the case, triple tap the pairing button to initial searching for Left & Right pairing, and then click “IMORE Aero” in the device pairing list
-
To pair the headphone’s to a new device, simply place them into the charging case and triple tap the pairing button. Then click ”l MORE Aeron in the new device pairing list to connect.
-
Why the headphones cannot play music after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make s:ure the “Media Audio” option is: on. -
Why there Is no sound from the headphones while making phone calls after successfully connecting to my Android device?
After pairing successfully, on the Bluetooth menu of your device, tap the icon on the right of your device name and make sure the “Phone Audio” option is on. -
Why the Bluetooth connection Is not stable end cause& some Interruptions?
-
Try shortening the distance between your headphones and device. Avoid solid barriers in between.
-
Please keep away from strong interference sources. such as WIFI and GPRS.
-
Please make sure the Bluetooth antenna of your device is not blocked.
-
Why .some control functions do not mitis those in the manual while using third party music/video player Apps?
Your operating system and the third party music/video player apps may have different settings for the control functions, We recommend that you use the mu.sic/video player apps that your device has originally provided.
IC
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:(1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
This device has been tested for compliance with IC SAR values at a typical
operating near the body. To ensure that RF exposure levels below the levels
tested. use accessories with this equipment to maintain a minimum separation
distance of O cm between the body of the us.er and the device. These
accessories should not contain metallic components. It Is possible that the
accessories used close to the body that do not meet these requirements are not
consistent with the SAR limits and it is advisable ta avoid using them.
WEEE
All products bearing this symbol are waste electrical and electronic
equipment (WEEE a directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point far the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the environment
and human health Please contact the installer or local authorities for more
information about the location as well as terms and conditions of such
collection points.
Your 1MORE retailer will advise you of the correct way of disposal in your
country.
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine,
fire or the like.
Tiinlab Corporation hereby declares that this product is in compliance with
the essential requirements and other relevant pravision5 of Directive
2014/53/EU and all other
applicable EU directive requirements. The full text of the EU declaration of
conformity Is available at the following Internet address:
www.lmore.com
Hereby, Tiinlab Corporation declares that the radio equipment type ES903 is in
compliance CA with audio E:auipment Regulations 2017. The full text of the
UKCA declaration of conformity is available at the following internet
address:www.lmore.com
The Bluetooth if : word mark and logos are registered trademarks owned by
Bluetooth SIG. Inc. The Qi logo is a registered trademark of the Wireless
Power Consortium.
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard
(such .as catching fire, explosion’s, leakage of corrosive electrolyte etc);
Disposal of a battery into fire or a hot oven. or mechanically crushing or cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas; and
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas..
=== The symbol indicates DC voltage.
Name; Wireless Earphones Earbuds Fully Charged: 7 hours
Model: ES903 Case and Earbuds Fully Charged: 28 hours
Single Earbud Weight: 4.9 g Playtime (ANC On)
Case Weight: 45.2 g Earbuds Fully Charged: 5 hours
Gross Weight: 55.1 g Case and Earbuds Fully Charged: 20 hours
Earbuds Size: 39.42 X 20.33 X 24.36 mm Speaker Impedance: 32 fl
Case Size: 61.99 X 56.40 X 25.5 mm Bluetooth Range; 10 m
Single Earbud Battery Capacity: 40 mAh Bluetooth Version: Bluetooth'”‘ 5.2
Case Battery Capacity: 450 mAh Bluetooth Protocol: HFP / A2DP / AVRCP
Earbuds Charging Time: 1 hour Input: s V=: 0.7 A
Case Charging Time: 2 hours Working Temperature: O t .. 45 t:
Playtime (ANC Off) Frequency Range: 2.400 GHz – 2.4835 GHz
IC 24662-ES903L FCC ID: 2ASDIE5903L HVIN: ES903L
IC 24662-ES903R FCC ID: 2ASDIES903R HVIN: ES903R