renkforce 2902954 400 Degree Heating Unit Suitable User Manual
- June 13, 2024
- renkforce
Table of Contents
renkforce 2902954 400 Degree Heating Unit Suitable
Product Information
- Product Name: Hotend Replacement Part
- Item Number: 2902954
Safety Instructions
- The product can reach very high temperatures. Disconnect it from the power supply before replacing parts to avoid burns.
- The product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying around carelessly as it may become dangerous playing material for children.
- Handle the product carefully. Jolts, impacts, or even a fall from a low height can damage the product.
- Do not place the product under any mechanical stress. Protect it from extreme temperatures, strong jolts, flammable gases, steam, and liquids.
- Read the provided documents and safety instructions carefully.
Failure to follow the safety instructions may result in personal injury or damage to property, which will invalidate the warranty/guarantee.
Disposal
This product must be disposed of separately from unsorted municipal waste.
Spent batteries, accumulators, and removable lamps should be removed in a non-
destructive manner before disposal.
Distributors are legally obliged to provide free takeback of waste.
For more details on return options, visit our website.
Technical Data
Material:
- Head: Pure Metal
- Heat Block: Brass
Product Usage Instructions
- Download the latest operating instructions from www.conrad.com/downloads or scan the provided QR code.
- Follow the instructions on the website to properly operate and use the product.
- Ensure that you disconnect the product from the power supply before replacing any parts to avoid burns.
- Handle the product with care to prevent any damage from jolts, impacts, or falls.
- Avoid placing the product under mechanical stress or exposing it to extreme temperatures, strong jolts, flammable gases, steam, or liquids.
- Read and follow all safety instructions provided in the documents to avoid personal injury or damage to property. Failure to do so may invalidate the warranty/guarantee.
- Dispose of the product separately from unsorted municipal waste. Remove spent batteries, accumulators, and removable lamps before disposal.
Safety Instructions
Replacement Part: Hotend
Item no: 2902954
Intended use
- The product is a replacement hotend for use with 3D printer (Item No.: 2583518).
- If you use the product for purposes other than those described, the product may be damaged.
- Improper use can result in short circuits, fires, or other hazards.
- The product complies with the statutory national and European requirements.
- For safety and approval purposes, you must not rebuild and/or modify the product.
- Read the safety instructions and any accompanying instructions carefully and store them in a safe place. Make this product available to third parties only together with the safety instructions and any accompanying instructions.
- All company names and product names are trademarks of their respective owners. All rights reserved.
Operating instructions
Download the latest operating instructions from www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The symbol warns of hazards that can lead to personal injury.
Safety instructions
Read this document and the accompanying operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Operating environment
- Do not place the product under any mechanical stress.
- Protect the part from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
Product
- Risk of burns! The product can reach very high temperatures. Always allow to fully cool before handling.
- Risk of electric shock! The product uses electricity for heating. Always disconnect from the power supply before replacing.
Cleaning
Important:
-
Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction. -
Do not immerse the product in water.
Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed
of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators,which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to
provide free takeback of waste. Conrad provides the following return options
free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
Technical data
-
Material……………………………………. Head: pure metal
Heat block: brass -
Heating ……………………………………. max. 400 °C
-
Temperature resistance……………… Heater: +500 to +600 °C
Sensor: +500 to +600 °C
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2902954_V1_0923_dh_ss_en 987921035-2 I1/O1 en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>