SitnStand Lift Assist Compact Weelchair Customized User Manual
- June 13, 2024
- SitnStand
Table of Contents
SitnStand Lift Assist Compact Wheelchair Customized
Placing the SitStand
PRIOR TO PLACING THE SIT-STAND, MAKE SURE THAT THE WHEELCHAIR BREAKS ARE LOCKED
- A. Place the SitnStand folded on the wheelchair – Illustration A.
- B. Insert the back part/ Air Supply area between the back and the seat of the wheelchair – Illustration B.
- C. Place the air supply unit’s slings on the wheelchair’s handles and tighten them up – Illustration C.
- D. When not in use we recommend you attach the remote control to a velcro strip that will be attached to the wheelchair push handles – Illustrations 01 + 02.
Sitting Down
LOCK THE WHEELCHAIR BRAKES BEFORE SITTING DOWN!
- A. Sit Comfortably in the center.
- B. Start deflating by pressing the “Down” arrow button.
- C. You Can Now Sit Down Comfortably.
NOTE:
When using the battery for the first time it should be charged for at least 12
hours.
Standing Up
LOCK THE WHEELCHAIR BRAKES BEFORE SITTING DOWN!
- A. Take your feets off the wheelchair paddes and place them on the floor, close to the chair.
- B. Sit upright.
- C. Spread your feet.
- D. Inflate the cushion by pressing the “Up” button.
- E. Now you can easily Stand Up.
NOTE:
lncase of cognitive imperiment the SitnStand should only be oparated by a
caregiver.
Get to Know the Remote Control
NOTE:
Standb)l mode- flashes slowly (one flash/sec) I Working mode – flashes quickly
(5 flashes/sec) I Malfunction reset -press the two control buttons
simultaneously for 10 secs. If that doesn’t help, please contact us at –
info@sitnstand.com
Standing Up
- A. Remove battery by sliding it towards you.
- B. Connect battery to the charger as illustrated.
- c. When the “Red” light on the charger changes to “Green”, the battery is fully charged.
- D. Slide the charged battery into its place.
NOTE:
When using the battery for the first time, it should be charged for at least
12 hours.
Read User Manual Online (PDF format)
Loading......