Steba MX 50 Stick Blender Instruction Manual
- June 4, 2024
- Steba
Table of Contents
Steba MX 50 Stick Blender
Generally
This appliance is for private and indoor use only and must not be used commercially. Please read the instruction manual carefully and keep it at a safe place. When the appliance is given to ano-ther person the instruction manual should be passed to that per-son, too. Only use the appliance as described in the instruction manual and pay attention to the safety information. No liability for damages or accidents will be accepted, which are caused by not paying attention to the instruction manual. Remove all pa- ckaging and sticker (except the rating label). Wash up all parts carefully (see cleaning).
Safety information
- The blade is very sharp!
- Connect and operate the appliance in accordance with the specifications shown on the rating label.
- Do not use if the plug cord is damaged. Verify before every use.
- Do not plug with wet hands.
- Connect the power plug to a properly installed and easily accessible socket only.
- To unplug the power plug, always pull the plug – not the cable.
- Plug off the appliance after each use or in case of failure.
- Do not pull at the cord. Don’t pull it over edges and don’t bend it too much.
- Keep the cord away from hot parts.
- The appliance can be used by children aged 8 and above and persons with limited physical, sensory or mental capa-bilities or lack of experience/knowledge, provided that are su-pervised or have been provided with instruction in the safe use of the appliance and have understood the resulting dangers. Children must not use the packaging as a toy. Cleaning and user maintenance must not be carried out by children unless they are 8 years or older and are supervised.
- Children under the age of 8 must be kept away from the appli- ance and the connecting cable.
- Children should be supervised to ensure that they do not play with the appliance or packaging material (e.g. Plastic Bags).
- The appliance must not be operated using a timer or a separate remote system!
- Never leave the appliance unattended when in use.
- Do not leave the appliance outdoors or in a damp area.
- Never immerse the unit in water.
- Never use the device after a malfunction, e.g. if it felt down or has been damaged in any other manner.
- The manufacturer is not liable for damage which is occurring due to the usage of the appliance in a different way as de-scribed or a mistake in the handling has been made.
- To prevent injury, repairs such as replacing a damaged cord, should only be carried out by a customer service. Only original spare parts have to be used.
- Only use the device as described in this manual.
- This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and others working environments
- by clients in hotels, motels and other residential type environments
- bed and breakfast type environments.
- Before initial use : clean all parts carefully and leave to dry.
- If an extension cable is used, it has to have a cross-section of 1,5mm². A cable drum must always be unwound.
- If a GS-tested 16 A multi-pin extension is used, it may not be charged with more than 3680 watts due to fire hazard.
- Make sure that children do not tease the cable or that a trip hazard occurs.
- The device must always be disconnected from the power supply if it is not supervised and before assembling, disassembling or cleaning.
- Hygiene : Please always clean the device to avoid bacteria and mould formation.
- The maximum operating time is 1 minute. If the appliance is on heavy duty, the housing can get warm. Most work is done in seconds. If the appliance gets more than hand-warm, let it cool down.
Cleaning
- Attention! Pull the plug before cleaning.
- Never immerse the unit into water.
- Food residues must be removed for reasons of hygiene.
- Attention! Blade is sharp!
- Clean the housing with a damp cloth.
- Press the release button to pull the chopper off the motor part. ∙ Take out the blades/disc carefully by the plastic shaft.
- The mixing bowl, blades, plastic dough hook, shaft and stodger can be cleaned in the dishwasher!
- The lid with gear box may not be cleaned in the dishwasher. ∙ Do not use abrasive or acidic cleaning agents or steel sponges. ∙ Some foods, such as carrots, can discolour the plastic. Rub with vegetable oil can help.
Workplace
Important:
Never place this device on or next to hot surfaces (e.g. hot sto-ves). Only
use it on a even, stable and a heat resisting surface. It is important that no
inflammable items are near to the device. Do not place the device on the edge
of the table so that it cannot be touched by children or fall down when
touched.
- Stodger with measuring scale
- Lid with gear box
- Reversible stainless steel disc for cutting and rasping
- Shaft
- Blades
- Plastic kneading hook
- Mixing bowl
Usage
The food processor is suitable for shredding and chopping meat (without tendons and bones), hard cheese, onions, herbs, nuts, spices; for cutting and grating vegeta-bles; as well as for kneading dough.
- Caution! The blades are sharp! Put the shaft into the bowl.
- Place the desired cutting tool (cutting disc, stainless steel blade or plastic hook) on the shaft.
- Place the lid on the container according to the marking and turn it clockwise to tighten.
- Never work without a stodger! Do not put fingers or other objects into the refill opening!
- Do not use frozen food!
Reversible stainless steel disc
Suitable for cutting or grating fruit, vegetables or cheese at medium speed.
- Place the desired side of the stainless steel disc on the shaft.
- Place the lid with gearbox on the container as described above.
- Now put the motor part of the blender on the chopper.
- Cut the food into suitable pieces and put them into the refill opening. Slowly push the food down with the stodger.
- When using the disc, there is no need to use an additional blade.
- The disc is not suitable for processing hard food.
Stainless steel
blade
Suitable for chopping and mincing meat (without tendons and bones), hard cheese, onions, herbs, spices and much more at high speed.
- Place the stainless steel blade (without blade guard) on the shaft.
- Cut the food into small pieces and place them in the container with the blades. Observe the marking of the maximum filling quantity!
- Place the lid with gearbox on the container as described above.
- Now put the motor part of the blender on the chopper.
- Blend for approx. 10 – 15 seconds at maximum speed.
- Repeat the process several times if necessary to achieve the desired degree of fineness.
Plastic kneading hook
Suitable for mixing/kneading dough at high speed.
- Place the plastic knife on the shaft.
- Put the ingredients of the dough into the container. Observe the marking of the maximum filling quantity!
- Place the lid with gearbox on the container as described above.
- Now put the motor part of the blender on the chopper.
- Mix at high speed for no longer than 1 minute.
Correct Disposal
of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Packaging disposal : Do not throw away the package materials. Please put it in the recycling bin Gift box: Paper, should be put to the old paper collection point. Plastic packaging material and foils should be collected in the special collection containers.
Service and Repair
If the appliance must be repaired, please get in touch with your trader or with the manufacturer:
STEBA Elektrogeräte GmbH & Co KG
Pointstr. 2, 96129 Strullendorf / Germany
Distribution-Tel.: 09543 / 449-17 / -18,
Service-
- Tel.: 09543 / 449-44,
- Fax : 09543 / 449-19
- e-Mail : elektro@steba.com
- Internet : http://www.steba.com
Steba Elektrogeräte GmbH & Co. KG
Pointstraße 2, D-96129 Strullendorf Zentrale: Tel.: 09543-449- 0 Elektro@steba.com Fax: 09543-449-19 Vertrieb: Tel.: 09543-449-17 www.steba.com Tel.: 09543-449-18