TEGERA 8807R Cut Level D Utility Gloves Instruction Manual
- June 4, 2024
- TEGERA
Table of Contents
TEGERA 8807R Cut Level D Utility Gloves
INSTRUCTIONS FOR USE
DECLARATION OF CONFORMITY
www.ejendals.com/conformity
Carefully read these instructions before using this product.
EXPLANATION OF PICTOGRAMS 0 = Below the minimum performance level for the
given individual hazard X= Not submitted to the test or test method not
suitable for the glove design or material
Warning! This product is designed to provide protection specified in PPE
Regulation (EU) 2016/425 with the detailed levels of performance presented
below. However, always remember that no item of PPE can provide full
protection and caution must always be taken when exposed to risks.
**407:2004
ABCDEF
PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE)
A: Burning behaviour
B: Contact heat
C: Convective heat
D: Radiant heat
E: Small splashes of molten metal
F:** Large quantities of molten metal
PERFORMANCE (A-F)
Min. 0; Max. 4
Warning: EN 407:2004: if the glove consists of seperate parts which are not permanently interconnected, the perfomance levels and the protection only apply to the complete assembly. If the gloves have a performance level 1, 2 or X in burning behaviour in EN 407:2004 the gloves should not come in contact with naked flame.
EN 388:2016
ABCDEF
A. Abrasion resistance Min. 0; Max. 4
B. Blade cut resistance Min. 0; Max. 5
C. Tear resistance Min. 0; Max. 4
D. Puncture resistance Min. 0; Max. 4
E. Cut Resistance TDM (EN ISO13997), Min. A; Max.
F. Impact Protection P=Pass
PROTECTIVE GLOVES AGAINST MECHANICAL RISKS. Protection levels are
measured from area of glove palm. Warning: For gloves with two or more layers
the overall classification of EN 388:2016 does not necessarily reflect the
performance of the outmost layer. Do not use these gloves near moving elements
or machinery with unprotected parts. For dulling during the cut resistance
test, the coupe test results are only indicative while the
TDM cut resistance test is the reference performance result.
SUITABLE FOR CONTACT WITH FOOD SPECIFIED IN REGULATION (EU) 10/2011 AND
1935/2004.
All gloves/sleeves that are suitable for foodstuff may not be suitable for all
types of food. To know for which foodstuff the glove/sleeve may be used please
see the Food declaration of conformity. Contact Ejendals for more information
DERMATEST
Dermatologically tested. This product did not lead to toxic- irritative intolerance reactions in patch testing on humans carried out in accordance with international guidelines
EN 420:2003 + A1:2009 PROTECTIVE GLOVES – GENERAL REQUIREMENTS AND TEST
METHODS
Finger dexterity test: Min. 1; Max. 5
FITTING AND SIZING
All sizes comply with the EN 420:2003+A1:2009 for comfort, fit and dexterity, if not explained on the front page. If the short model symbol is shown on the front page, the glove is shorter than a standard glove, in order to enhance thecomfort for special purposes – for example fine assembly work. Only wear the products in a suitable size. Products which are either too loose or too tight will restrict movement and will not provide the optimal level of protection.
STORAGE AND TRANSPORT
Ideally stored in dry and dark condition in the original package, between +10º – +30ºC.
INSPECTION BEFORE USE
Check that the glove does not present holes, cracks, tears, colour change etc. If the product becomes damaged it will NOT provide the optimal protection and must be disposed of. Never use a damaged product. Wear (or take off) gloves one at a time. Replace gloves regularly for hygienic use
SHELF LIFE
The nature of the materials used in this product means that the life of this product cannot be determined as it will be affected by many factors, such as storage conditions, usage etc.
CARE AND MAINTENANCE
The user bares sole responsibility for submitting the product to mechanical washing after use, as unknown substances can contaminate the product during use and may affect the performance levels of the product. To care for your product, we recommend that you rinse in cold water and line dry in room temperature.
DISPOSAL
According to local environmental legislations. ’
The glove contains natural rubber which may cause allergy.
ALLERGENS
This product may contain components that may be a potential risk to allergic reactions. Do not use in case of hypersensitivity signs. For more information contact Ejendals.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>