MeTra 95-7863 Dash Kit Installation Guide

MeTra 95-7863 Dash Kit

KIT FEATURES

• Double DIN head radio provision
• Textured to match factory dash

KIT COMPONENTS

• Double DIN trim plate
• Double DIN brackets
• Replacement panel

WIRING & ANTENNA CONNECTIONS (Sold Separately)

Wiring Harness

• 70-1721 – Honda/Acura harness 1998-up
• 70-7863 – Element sub and AUX integration Antenna Adapter:
• 40-hd10 – Honda/Acura antenna adapter (for Element 2005-up)

TOOLS REQUIRED

• Panel removal tool
• Phillips screwdriver

CAUTION
Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.

Note
Refer also to the instructions included with the aftermarket radio.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and to take steps toward a better tomorrow.

Metra recommends MECP-certified technicians

Honda Element 2003-2010

1. Disconnect the negative battery terminal to prevent an accidental short circuit.
2. Unsnap and remove the shift lever trim panel. For manual transmission models, untwist the shift knob. (Figure A)
3. Unsnap and remove the center dash panel. (Figure B)
4. Remove (4) Phillips screws and remove the radio.

Tip: As an option, the center panel (the smaller piece around the radio) is all that needs to be removed. Note, it is prone to damage–full panel removal is recommended. (Figure C)

Continued kit assembly

Double DIN head radio provision

1. Attach the Double DIN brackets to the Double DIN trim plate. (Figure A)

2. Slide the Double DIN head unit into the bracket/radio housing assembly and secure the Double DIN head unit to the assembly using the screws supplied with the radio. (Figure B)

3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
   Note: Models equipped with factory DDIN radio will require a supplied O.E. Replacement panel. (Figure C)

4. Reassemble the dash in reverse order of disassembly.

METRA. THE WORLD’S BEST KITS.™
1-800-221-0932 metraonline.com COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

References

• Installer Institute Announces Closure after 31 Years | installerinstitute.edu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>