Moes BSS-X-CO2-U Bluetooth Smart Carbon Dioxide Tester Instruction Manual

BSS-X-CO2-U Bluetooth Smart Carbon Dioxide Tester

Product Information

The Carbon Dioxide Detector is a multi-functional smart home device that monitors house temperature, humidity, and carbon dioxide concentration. It has a built-in Bluetooth module and a linked gateway, allowing the CO2 concentration, temperature, and humidity values to be accessed through the MOES APP. This product is suitable for indoor places such as apartments, hotels, homes, schools, and fitness rooms. Please note that this product is a non-professional testing instrument and the measurement data should only be used as a reference for changes in the home air environment.

Technical Specifications

• Product Name: C arbon Dioxide Detector
• Working Voltage: 5 V/2A
• Working Temperature: -10°C to 50°C
• Working Humidity: 0% to 95%RH (No condensation)
• Carbon Dioxide Range: 400 to 5000ppm
• Temperature Detection Range: Celsius (-10°C to 99°C), Fahrenheit (-4°F to 210°F)
• Humidity Detection Range: 0% to 95%RH
• Wireless Protocol: Low-power Bluetooth
• Dimension: 85mm x 85mm x 30mm

Product Usage Instructions

1. Screen Hibernation: I f there is no operation, the screen brightness will change after a certain period of time and eventually go into hibernation mode.
2. Mounting Options: The detector can be placed on a desktop using the integrated support plate, mounted on a wall, or attached using a lanyard.
3. Network Configuration: Long press the network configuration button for 5 seconds to enter the network distribution status. Click the button to turn on or off the auto-calibration function.
4. Auto-Calibration Function: The detector has an automatic calibration function that can be manually turned on or off. This function allows the sensor to calibrate itself based on the ambient concentration of carbon dioxide. The calibration is done every 24 hours from power-on operation, with a zero point of 400ppm.

Product Description

The carbon dioxide detector is a multi-functional smart home device for monitoring the house temperature&humidity and carbon dioxide concentration, The Built-in Bluetooth module and the linked gateway enable the CO2 concentration, temperature, and humidity value to MOES APP, for checking the data record, creating smart home automation and other functions. It is suitable well for indoor places such as apartments, hotels, homes, schools, fitness rooms, and so on. This product is a non-professional testing instrument, and the measurement data can only be used as a reference for changes in the home air environment.

Technical specification

• Product Name: Carbon Dioxide Detector
• Working Voltage : 5V/2A
• Working Temperature: -10℃~50℃
• Working Humidity: 0%~95%RH(No condensation)
• Carbon Dioxide Range: 400~5000ppm
• Temperature detection range: Celsius (-10℃~99℃) Fahrenheit (-4℉~210℉)
• Humidity detection range: 0%~95%RH
• Wireless Protocol: Low-power Bluetooth
• Dimension: 858530mm1

Operations Guidance

1. Screen Hibernation
   No operation, the screen becomes 50% brighter after 1 minute, 20% brighter after 2 minutes, and goes into hibernation after 3 minutes.

2. Multiple mounting options
   Support desktop, wall, and lanyard multiple ways, desktop bracket, and the main body of the integrated design.

3. Power button function
   

   • Click Hibernate, hibernate state click to wake up the screen.
   • Press and hold the button for 2 seconds to turn on the power, and press and hold the button for 2 seconds to turn on the power in the off state.
   • Press the power button 5 times continuously and quickly to enter the manual calibration mode.
     NOTE: The sensor must be operated continuously for 20 minutes or more in a stable gas environment with known CO2 concentration before entering manual calibration mode, with a recommended calibration interval of no more than 3 months.

4. Configure the network button

   • Long press for 5 seconds to enter the network distribution status.
   • Click to turn on or off the auto-calibration function.

5. Auto-calibration function
   Automatic calibration function setting: can be manually turned on or off by clicking the network configuration button. (Body,
   bold)The automatic calibration function means that after continuous operation for a period of time, the sensor intelligently determines the zero point according to the ambient concentration and calibrates itself. The calibration cycle is automatically calibrated every 24 hours from power-on operation. The zero point of autocalibration is 400ppm.
   NOTE : Automatic zero calibration function is suitable for ventilated office environment, home environment. However, it is not suitable for agricultural greenhouses, farms, cold storage and other places, in such places should turn off the automatic zero calibration function, after closing, please regularly zero detection of the sensor, and if necessary, command zero calibration or manual

Safety Information

1. Do not disassemble, reassemble, modify, or attempt to repair the product by yourself. Such products may cause electric shock, leading to serious injury or death. If there are any issues, please contact the company’s professional maintenance.
2. Do not replace the battery by yourself, which may damage the battery, resulting in overheating, fire, and personal injury. The product’s lithium-ion battery should be recycled or disposed of separately from household waste according to local environmental regulations.
3. This product has no waterproof or dustproof function.
4. The sensor should be kept away from heat sources and avoid direct sunlight or other thermal radiation.
5. Do not use the sensor for a long time in an environment with high dust density.

Preparation For Use

Download MOES APP

MOES App is upgraded as much more compatibility than the Tuya Smart/Smart Life App, functional well for scenes controlled by Siri, widgets, and scene recommendations as the fully new customized service.
(Note: Tuya Smart/Smart Life App still works, but the MOES App is highly recommended)

Register or Log in

Enter the Register/Login interface; tap “Register” to create an account by entering your phone number to get a verification code and “Set password”. Choose “Log in” if you already have a MOES account.

Steps for connecting the APP to the device

Method One:

1. Scan the QR code to configure the network guide.
2. Make sure your MOES APP has successfully connected to a bluetooth gateway.

Method Two:

1. Make sure your phone is connected to Wi-Fi and the Bluetooth is enabled.
2. Press the power button on the detector and the buzzer will give a short beep. Then press the reset button for 5 seconds, the device buzzer beeps for 1 second, and the Bluetooth icon flashes at an interval of 250ms. The device is reset successfully and enters the App configuration mode.
3. Open the Smart MOES App and Click“+”, then the prompt page will automatically show on the screen. Click “Add” and click “Next”, waiting for the connection completed.
4. After the network configuration is successful, the Bluetooth icon of the device will shine on, and the APP interface displays “Added successfully”. You can then edit the device name.
5. Click “Done” to enter the device page. The current CO2 concentration, temperature and humidity values of the device will be displayed on the APP interface to enjoy your smart life.
6. Go to the Bluetooth Gateway homepage, tap “Add device by list”, select the carbon dioxide detector, Add to the gateway. The Bluetooth gateway is used to connect the smart lock to MOES/Smart Life APP for smartphone controls based on the internet as notifications, voice control, etc.

Storage
Products should be put in a warehouse where the temperature is between the range -10℃ ~ +50℃, and the relative humidity ≤70%RH, indoor environment with no acid, alkali, salt, and corrosive, explosive gas, flammable matter, protected from dust, rain and snow.

SERVICE

1. During the free warranty period, if the product breaks down during normal use, we will offer free maintenance for the product.
2. Natural disasters/man-made equipment failures, disassembly and repair without the permission of our company, no warranty card, products beyond the free warranty period, etc., are not within the scope of the free warranty
3. Any commitment (oral or written) made by the third party (including the dealer/service provider) to the user beyond the warranty scope shall be executed by the third party
4. Please keep this warranty card to ensure your rights
5. Our company may update or change the products without notice. Please refer to the official website for the updates.

RECYCLING INFORMATION
All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

WARRANTY CARD

• Product Information
• Product Name
• Product Type
• Purchase Date
• Warranty Period
• Dealer Information
• Customer’s Name
• Customer Phone
• Customer Address

Maintenance Records

• Failure date
• Cause Of Issue
• Fault Content
• Principal

Thank you for your support and purchase at We Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us.

If you have any other needs, please do not hesitate to contact us first, and we will try to meet your demand.

FOLLOW

• @moessmart
• @moes_smart
• MOES.Official
• @moes_smart
• @moes_smart
• www.moes.net

CONTACT

• EVATOST CONSULTING LTD
• Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
• Tel: +44-292-1680945
• Email: contact@evatmaster.com
• AMZLAB GmbH
• Laubenhof 23, 45326 Essen Made In China

Manufacturer:

• Address: WENZHOU NOVA NEW ENERGY CO.,LTD Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
• Tel: +86-577-57186815
• After-sale Service: service@moeshouse.com

References

• MOES Smart: Create Your Smart Life With Smart Home Devices

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>