Fleurco MHAPR2424 Halo Plus Mirror Installation Guide

Fleurco MHAPR2424 Halo Plus Mirror

Product Information

• Product Name: HALO PLUS – MHAPR-MHAPO
• Model Numbers:
  • MHAPR2424
  • MHAPR3030
  • MHAPO2039
• Maximum Amps: 15
• Rated Voltage: 120V
• Grounding: Yes
• Product Materials: Mirror and Aluminum

Product Usage Instructions

Before beginning the installation, please read all instructions carefully:

• This product is intended for use on a nominal 120-volt circuit with a grounding plug.
• Ensure that the product is connected to an outlet having the same configuration as the plug.
• Do not use any adapters with this product.
• Close supervision is necessary when using this device near children, invalids, or disabled people.
• Only use this device for its intended purpose as described in the instructions.
• Do not use attachments not recommended by the manufacturer.
• If the device has a damaged cord or plug, is not working properly, has been dropped or damaged, or dropped into water, return it to a service center for examination and repair.
• Connect the device to a properly grounded outlet to avoid the risk of electric shock.
• For maintenance, avoid using scouring powder pads, abrasive material, strong bleach, or sharp instruments on metal components or glass.
• Wipe down the mirror and aluminum parts with a mild soap diluted in water to keep them looking new.
• Test products on a small inconspicuous surface prior to use.

Read all instructions carefully before proceeding. Record the serial number on the back page and save this guide for future reference.

THANK YOU
We can assure you that FLEURCO has used the best materials and has applied the strictest quality control measures to ensure that each and every unit meets the highest quality standards. This booklet contains general information about the unit as well as step-by-step installation instructions.

BEFORE BEGINNING

• Carefully read the instructions before beginning the installation.
• This product is wall-mounted only
• DANGER! To avoid the risk of electrocution, turn off the electricity mains before commencing the installation.

GROUNDING INSTRUCTIONS

• This product is grounded, cord-connected, and rated at a maximum of 15 amps.
• This product is intended for use on a nominal 120-volt circuit and has a grounding plug. Make sure that the product is connected to an outlet having the same configuration as the plug.
• No adapter should be used with this product.

SAFETY INSTRUCTIONS

Read all instructions before using this device.

WARNING
To avoid the risk of burns, fire, electric shock, or injury to persons:

1. Always unplug this device from the electrical outlet before cleaning.
2. Unplug/disconnect from the outlet before putting on or taking off parts.
3. Close supervision is necessary when this device is used by, or near children, invalids, or disabled people.
4. Use this device only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
5. Never operate this device if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the device to a service center for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never drop or insert any object into any opening.
8. Do not use this outdoors.
9. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
10. To disconnect, turn all controls to the off position, then remove the plug from the outlet.
11. WARNING: Risk of Electric Shock – Connect this device to a properly grounded outlet only. See Grounding Instructions.
12. Mount devices at the correct height.

SAVE THESE INSTRUCTIONS

MAINTENANCE

Never use scouring powder pads, abrasive material, strong bleach, or sharp instruments on metal components or glass. An occasional wiping down with a mild soap diluted in water is all that is needed to keep the mirror and aluminum parts looking new. Test products on a small inconspicuous surface prior to use.

TOOLS AND MATERIALS REQUIRED

HARDWARE LISTING

SPECIFICATIONS

SPECIFICATIONS

Model| A| B| C| D| E| F| G| H
MHAPR2424| 23 5/8″

600mm

| 23 5/8″

600mm

| 1 3/16″

30mm

| 9/16”

15mm

| 12 13/16″

325mm

| 8 11/16″

220mm

| 9 7/8”

250mm

| 7 7/8”

200mm

MHAPR3030| 30″

762mm

| 30″

762mm

| 1 3/16″

30mm

| 9/16””

15mm

| 16 13/16″

427mm

| 9 7/8″

251mm

| 13 3/4”

350mm

| 9 7/8

250mm

Product specifications are subject to change without notice

SPECIFICATIONS

Model| A| B| C| D| E| F| G| H| I
MHAPO2039| 19 11/16″

500mm

| 39 3/8″

1000mm

| 1 3/16″

30mm

| 9/16″

15mm

| 14 3/8″

365mm

| 14 9/16″

370mm

| 12 3/16”

310mm

| 17 3/4”

450mm

| 10 1/4”

260mm

ELECTRICAL OUTLET

Verify that the electric outlet to be used is located within the recommended area shown below when choosing the mirror position on the wall.

300mm

| 8 1/4″

210mm

| 11 1/2″

290mm

MHAPR3030| 15 3/4”

400mm

| 14 1/2″

370mm

| 11 1/2″

290mm

MHAPO2039| 12 3/16”

310mm

| 17 11./16”

450mm

| 12 1/2”

317mm

A,B,C are reference dimensions

Back of the mirror

• Recommended outlet zone

D: Recommendation for minimum distance

MIRROR INSTALLATION

PLACEMENT
Select the desired position of the mirror. Mark the curve at the top of the mirror.

KEYHOLE LOCATION
Measure the center of the holes and mark the drilling locations to ensure markings are leveled.

INSERT SCREWS
Using a drill, make holes and fill them with supplied plugs and screws. Leave a gap of 2 – 3mm between the head of the screw and the wall. (Image C)

CONNECTION AND MOUNTING THE MIRROR
Plug in the mirror. If the power cord is too long, it can be hidden inside the recessed area in the back of the mirror. Then place it against the wall while aligning the holes with the screws. Slide down as shown in image B.

CONTROLS

• POWER BUTTON: Short press for light and defogger ON/OFF. Long press to adjust light brightness.
• COLOR TEMPERATURE SELECTOR: Short press for color temperature selection 2700K-4500K-6500K. Long press to gradually cycle through the options.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>