GOAL ZERO 70050 HAVEN 10 Home Battery Transfer Switch User Guide

GOAL ZERO 70050 HAVEN 10 Home Battery Transfer Switch

Product Information

The Haven 10 is a manual transfer switch designed to back up 10 essential circuits during a power outage. It is compatible with the Yeti PRO 4000 power station and optional Tank PRO 4000 Expansion Battery. The Haven 10 Home Integration Kit (SKU: #70050) includes the necessary components for installation.

Product Usage Instructions

1. Getting Started:
   • Prior to installation, determine the specific circuits you want to keep powered during an outage. Common circuits include the refrigerator/freezer, Wi-Fi router outlet, kitchen/bedroom outlets, and garage door opener/sump pump.
   • Note that these circuits operate on 120 V, while air conditioners and electric dryers/ovens require 240 V.
2. Connecting the Yeti Power Station to the Transfer Switch:
   • Once the Haven 10 is professionally installed, connect the Yeti power station to the front of the transfer switch using the Yeti Extension Cable.
3. Keeping the Yeti Charged:
   • For optimal performance, it is recommended to keep the Yeti Power Station plugged into a wall outlet at all times to maintain a continuous 100% charge.
4. Using Your Backup Power During an Outage:
   • Press the Power Button on the Yeti Power Station. The button will glow white to indicate that the power is on.
   • Lift the cover of the Haven 10 and flip the switches from LINE to YETI to activate the backup power for the selected circuits.
5. Going Back to the Grid:
   • Once the grid or LINE power is restored, return the switches on the transfer switch back to LINE.
   • To turn off the Yeti Power Station, push the AC button until the light turns off. There is no need to disconnect the Yeti from the Haven 10 when not in use.

If you have any additional questions or need further assistance, please visit our contact page at www.goalzero.com/contact or call 1-888-794-6250.

KEEP YOUR LIFE RUNNING WITH BACK UP POWER
The Haven 10 is a convenient manual transfer switch that lets you back up 10 essential circuits during a power outage. Use it with your Yeti PRO 4000 to keep lights on, fridges cooling, and personal devices charged. All without moving your power station.

PRODUCT INFORMATION

INFORMATIONS SUR LE PRODUIT

GENERAL

• 10 Circuits: 4-20A, 6-15A
• Built-in Protection: one per circuit
• Max Wattage: 7500W
• Max circuit breaker: 2x 30A and 8x 20A
• Requires Goal Zero Yeti PRO 4000 power station and optional Tank PRO 4000 Expansion Battery.

WHAT’S INCLUDED

• Yeti Extension Cable: 5 ft, 10AWG
  Note: This cable can only be used to connect one Yeti PRO 4000

• Haven 10 Manual Transfer Switch (Reliance PRO/TRAN 2®)

• 3600 W Passthrough Cable (More info in the back of this booklet)

GETTING STARTED

With your new Haven 10 and Yeti PRO 4000, you have the ability to wire up ten, 120 V* circuits in your home. So when the power goes out you can keep your most prized electrical components running.

• You’ll want to know which circuits you’d like to keep powered on before your Licensed Electrician comes to install the Haven 10.

Common circuits to keep powered:

These circuits run on 120 V or less, *Air conditioners and electric dryers/ovens are 240 V.

CONNECTING THE YETI POWER STATION TO THE TRANSFER SWITCH

After the Haven 10 has been professionally installed, you can connect the Yeti to the front of the transfer switch with the Yeti Extension Cable.

KEEP THE YETI CHARGED

If possible, keep the Yeti Power Station plugged into the wall outlet at all times to ensure a continuous 100% charge.

USING YOUR BACKUP POWER DURING AN OUTAGE

Just when you think “Oh No!” when the power goes out, you’re quickly calmed knowing that you’ve already installed your back-up power system and you’re good to go.

1. Press the Power Button on the Yeti Power Station.
2. The button will glow white when the power is on.
3. Lift the cover of the Haven 10 and flip your switches from LINE to YETI. All Done!

GOING BACK TO THE GRID

1. Once your grid or LINE power has been restored, simply return the Switches back to LINE on the transfer switch.
2. Then turn off the Yeti power stations by pushing the AC button. The light will turn off. All Done!
   •  There is no need to disconnect the Yeti from the Haven 10 when not in use.

FAQs

Q: What Yeti Portable Power Station do you recommend to use with the Haven 10?
A: The Haven 10 is only compatible with the Yeti PRO 4000 power station and Tank PRO 4000 Expansion Battery.

Q: How long will the Haven 10 system run my fridge?
A: Just like estimating runtimes from the Yetis themselves, runtimes with the Haven 10 system are dependent on what you’re powering (lights vs. fridge) and what Yeti Portable Power Station you’re using. The amount of power a fridge pulls is completely dependent on the make and model, as well as other factors, like how often you are opening and closing it, and how full it is. For example, a fridge pulling an average of 55 watts would run for approximately 72 hours from a Yeti

PRO 4000 (4000Wh/55=72.72. For more information on runtimes and other examples, check out the user manual for the Goal Zero Yeti Portable Power Station.

Q: What if I want to take the Yeti PRO 4000 outside?
A: Easy, simply unplug the Yeti and take it wherever you need it.

3600 W Passthrough Cable
8 ft Flying Leads to Power + Male Cable

This cable replaces the power cord that is included with the Yeti PRO. Please keep the power cord in case you need it in the future.

• The cable allows for automatic power switching in less than 10 milliseconds (up to 3600 W). When grid power goes down, the circuits connected to the Haven 10 will switch to using power from the Yeti PRO. To take advantage of this feature, make sure the Yeti PRO 4000 is connected to the Haven 10 Manual Transfer Switch and that the circuits are set to “YETI”.
• It allows you to charge the Yeti PRO 4000 while simultaneously passing through power to your circuits.
• Passthrough capability up to 3600 W when the Yeti PRO is completely charged. (120 V only)
• If charging at 1800 W, it can continue to pass through another 1800 W

NEED ASSISTANCE?
If you need additional assistance setting up or using your Haven 10 and Yeti PRO 4000, visit our contact page at www.goalzero.com/contact or call 1-888-794-6250.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>