LVNASST WLPC003 Electric Milk Frother User Manual

LVNASST WLPC003 Electric Milk Frother

Safety Precautions

• Before using the machine, basic precautions and instructions should always be followed.
• Read the instructions thoroughly and keep them for future reference.
• This appliance is for indoor use only.
• Make sure the bottom of the machine and the connector of the workstation are dry before powering on.
• Do not operate the appliance when there is no milk inside it.
• Make sure the power plug is correctly inserted into the AC120V socket.
• Unplug from the power outlet when not in use, before cleaning, or during setup.
• Keep away from children. This appliance can be used by children aged 8 years and above if they have been given supervision or under the adults’ instruction.
• Do not remove the lid when the machine is working to avoid burning.

How To Use

1. Pour some milk into the machine no more than the max level, and no less than the min level.
2. Cover the lid and plug in.
3. First time press the button to turn it on, and the “Choco” indicator will light, heating only.
4. Secondly press the button to switch to “Unheated”, frothing cold milk.
5. Thirdly press the button to switch to “Latte”, frothing and heating fluffy foam.
6. Press four times and the light glows, switch to “Capp”, frothing and heating densely textured foam.
7. The mode can be switched from bottom to top in this order.

Specifications

Capacity

• Min-level for frothing: 2.6oz/75ml
• Max-level for frothing milk : 4.73oz/140ml
• Max-level for warming: 7.44oz/220ml

Tips:

• Make sure the stirring head is not loose.
• Pour the liquid into the cup, the fat content of the milk is not less than 3%.
• Remember to cover the lid.
• Do not add milk higher than the max level or lower than the min level, it may cause milk overflow or affect the frothing effect.
• The frother can heat the milk up to 65±5℃(149±41℃).

Operation Guide

Initialization State:

Startup and function selection: Short-touch the button to start the controller, all 4 indicator lights glow blue for 1 second and off, and it is in standby mode.

Enter the Operating State:

Touch the button to switch the function. After touching the button the first time, the “Choco” mode light glows blue, then short press the button to switch modes. The switching order is “Choco”, “Unheated”, “Latte” and “Capp”. If the button is not pressed within 2 seconds, it enters the working mode.

During the operation, short-press the button to switch the function, and it will enter the standby state after finishing the work.

Note: After entering the operating state, if the work is not completed, but the maximum working time of the corresponding mode is reached, it will also enter the standby state.

Return to Standby Mode:

Short press the button until the “Capp” light glows blue, then touch the button again, and the machine returns to standby.

Cleaning and Maintenance

• Always make sure the power plug has been removed after use and before cleaning.
• Wait for the machine to cool down.
• The power base never be placed in any liquid for cleaning, which will cause a short circuit or a fire.
• Do not use a hard nylon brush or metal brush to clean, and do not use abrasive cleaner.
• Use a soft cloth to clean the machine’s surface. Avoid fluid infiltration into the machine body.
• Clean the cup, lid, and stirring head immediately after use.
• Rinse the whisk with clean water and wipe it dry, store it in a safe place.

Warranty And Service

Thank you for choosing LVNASST Milk Frother. If you have any questions, or concerns, or need assistance at any point, please do not hesitate to reach out to us. You can contact us via email at support@wlongtek.com. Rest assured that we will respond promptly and do everything we can to resolve any issues you may encounter.

The warranty will not apply in cases of:

• Not cover damage caused by improper use, abuse, or neglect of the milk frother. This includes using the frother for purposes other than frothing milk or failing to follow the manufacturer’s instructions.
• Not cover regular wear and tear that occurs during proper use of the frother over time.
• Damages resulting from accidents, drops, spills, or any other incidents not related to the product’s manufacturing defects not be covered.
• Products bought from unauthorized sellers: Purchasing the milk frother from unauthorized sellers or channels not approved by the manufacturer void the warranty.

that the socket is correct and has power, and make sure the power plug is inserted into the socket in place. Check the main circuit switch.
Not frothing| The frothing whisk is not inserted correctly.| Insert the frothing whisk into the axle in the milk jug.
Not frothing| Parts are jammed.| Smooth out the steel ring of the stirring head.
Not frothing| Poured in less than the minimum amount of milk.| Pour in plenty of milk.
The machine stops before the function is finished.| Over temperature protection.| Stop the machine for 2 minutes.

Customer Support

support@wlongtek.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>