Anker A2059 Charger Built In 1.5m USB-C User Manual
- June 13, 2024
- Anker
Table of Contents
Anker A2059 Charger Built In 1.5m USB-C
Product Information
- Product Name: Anker Charger (12W, Built-In 5 ft USB-C Cable)
- Product Number: A2059 51005004125 V01
- Specifications:
- Input: 100-240V~0.5A, 50-60Hz
- Output: 5V 2.4A (12W Max)
- Operating Temperature: 0 – 25°C / 32 – 77°F
This product is designed for indoor use only. The symbol on the product indicates that it should not be treated as household waste and should be handed over to the applicable collection point for recycling of electrical and electronic equipment.
Product Usage Instructions
- Connect the Anker Charger to a power outlet using the provided USB-C cable.
- Ensure that the input voltage of the charger matches the voltage of your power outlet (100-240V~0.5A, 50-60Hz).
- Once connected, the charger will start supplying power.
- The output voltage of the charger is 5V with a maximum current of 2.4A (12W Max).
- Make sure to use the charger within the recommended operating temperature range of 0 – 25°C / 32 – 77°F.
- This charger is suitable for charging devices that are compatible with USB-C charging.
Attention
- The product is intended for use with IT equipment only.
- Don’t place near naked flame sources, such as candles, on the product.
- Disconnect the product from the power source by unplugging the AC adapter.
- If the plugs are broken, the product should be disposed of properly.
- When cleaning the product, only use a dry cloth or brush.
- The power socket should be installed close to the equipment and easily accessible.
- The power supply is not meant to be repaired by service personnel in case of failure or component defect. Please dispose of the product properly.
Using Your Product
Specifications
- Input: 100-240V~0.5A, 50-60Hz
- Output: 5V≠2.4A (12W Max)
- Operating Temperature: 0 – 25 ℃ / 32 – 77 ℉
Indoor use only.
This symbol indicates that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
support@anker.com
support.mea@anker.com (For Middle East and
Africa Only)
(US/CA) +1 (800) 988 7973
(UK) +44 (0) 1604 936200
For tutorial videos, FAQs, manuals, and more information, please visit:
https://support.anker.com
Or scan the QR code below:
References
Read User Manual Online (PDF format)
Loading......