KEYSTONE KT-ALED70-S2 LED Area Light Fixtures Datasheet

KEYSTONE KT-ALED70-S2 LED Area

Light Fixtures Datasheet

DESCRIPTION
70W Optic Swap LED Area Light | 120–277V Input | Bronze Housing | Multiple Mounting, Optics, and Control Options

APPLICATION
Pole-mount or structure-mount outdoor illumination needs (including parking lots, auto dealerships, pathways, roadways, recreational venues, and other general area lighting requirements)

PRODUCT FEATURES

• Innovative optic swap capability under door frame and latch design for quick lens change
• Two lenses in the box: Type III installed, Type V included
• Type II and Type IV lenses sold separately. See below for details
• Heavy duty die cast aluminum housing with ample heat sinking
• Low-profile design delivers high-performance illumination and improves application site aesthetics
• True U0 design for dark sky friendly performance eliminates undesirable sky glow
• Integrated NEMA/ANSI C136.10 3-pin twist-lock receptacle with shorting cap, standard on all fixtures, simplifies ordering requirements for photo control needs
• Four contractor-friendly mounting options available (sold separately): slip fitter mount, adjustable pole mount for square and round poles, fixed pole mount for square and round poles, and trunnion mount
• Keystone 0-10V dimming driver
• Ambient operating temperature: −40°C/−40°F to 50°C/122˚F
• UL Certified; IP65 rated
• Power factor: > 0.95
• THD: < 20%
• LED chip lifetime: L70 > 100,000 hrs @ 25C°/77°F ambient fixture temperature
• Meets FCC Part 15, Part B, Class A standards for conducted and radiated emissions

PRODUCT SPECIFICATIONS

• mFor more information, see Accessories page below or contact Keystone with questions.
  ** Fixtures (and mounts) with alternate housing colors are available and made to order. Extended lead times apply.
  Please see catalog number breakdown for full ordering code details.

PHYSICAL SPECIFICATIONS

LED AREA LIGHT FIXTURE

POLE MOUNT (ADJUSTABLE OR FIXED) DRILLING HOLES

WIRING DIAGRAM

LIGHT DISTRIBUTION PATTERN

PHOTOMETRIC SPECIFICATIONS (TYPE II [2])

PHOTOMETRIC SPECIFICATIONS (TYPE III [3])

PHOTOMETRIC SPECIFICATIONS (TYPE IV [4])

PHOTOMETRIC SPECIFICATIONS (TYPE V [5])

EPA SPECIFICATIONS

Small-Size Fixture Housing

Conditions: Horizontal winds only for calculations. Worst case total projected area used for calculations. All drag coefficients are set as worst case 1.2.
For details on exact EPA calculations and assumptions, please contact productsupport@keystonetech.com

ACCESSORIES (SOLD SEPARATELY)

ACCESSORIES (SOLD SEPARATELY)

ORDERING INFORMATION

CATALOG NUMBER BREAKDOWN

ORDERING EXAMPLES

• When ordering more then one factory-installed accessory, use multiple suffixes as shown in the ordering examples above.
  Note: All accessories can also be ordered separately for field installation using just their regular Catalog Number, UPC, or Easy Code.

Keystone Technologies • Philadelphia, PA • Phone 800-464-2680 • www.keystonetech.com
Specifications subject to change. Last revised on 09.19.23

References

• Keystone Technologies | Light Made Easy | Since 1945

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>