COMHOMA GT-LYNCK-HOME-B Bluetooth Speakers User Manual

COMHOMA GT-LYNCK-HOME-B Bluetooth Speakers

Do not use this product until you read and understand the instructions in this manual.

KEEP THIS MANUAL FOR FUTURE REFERENCE.

Maintenance and Care

Read the following recommendations before using your speakers.

• Do not let small children play this product.
• Do not expose the speakers to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
• Do not use abrasive cleaning solvents to clean the speaker.
• Store the speaker out of direct sunlight and extreme temperatures (above 45°C/113°F or below -10°C/- 14°F), as this may affect the operation or degrade the performance of your speaker.
• Do not dispose of the speaker in a fire as it might result in an explosion.
• Do not expose the speaker to sharp objects as this will cause scratches and damage.
• Do not drop the speaker. This may cause damage to the internal circuitry.
• Do not attempt to disassemble the speaker. This may cause damage to the internal circuitry.

Package Components

• Speaker(Main) x1pc
• Power Cable x1pc
• Bracket x4pcs
• Speaker(Sub) xipc
• Audio cable x1pc
• User Manual xIpc

Product Specification

• Input: USB 5V
• Output Power: 10W
• Frequency Range: 20Hz-20KHz
• Audio Source Selection: Bluetooth Mode
• Connection Distance: 15m (without occlusion)
• Storage/Handing Temperature: -10 C-45 C

Setting up your speakers

1. Attach the brackets to the main and subspeakers.
2. Connect the audio cable to main and sub speakers and the power adapter of your speakers to the the socket.

Usage introduction

Bluetooth Connection Method

1. Tap the key for 3s to turn on the speakers, it will enter Bluetooth mode and voice prompts: “Bluetooth Mode”.
2. Activate the Bluetooth function on your device and pair to “GT-LYNCK-HOME-B”.
3. when connected, voice promits: “Connected”.
4. Short-tap the key once to play or pause the music.

Note:

1. The Bluetooth speakers will only sync with one device at any time, the connection cannot be deleted when matching. It can only be deleted in disconnection mode.
2. A Bluetooth connection list cannot have two devices at the same time.
3. When playing music on some mobile phones, the music will be transmitted to the mobile phone’s speaker instead of the portable speaker. You have to select “transmit the sound via Bluetooth” in the settings menu and then choose “GT-LYNCK-HOME-B” as speaker device. The music will be transmitted to the speaker.

Bluetooth Control APP

1. Get the Control APP
2. How to use the Control APP

Please contact us if there is any problem when using COMHOMA product. We will reply within 24 hours and try our best to solve it.

Contact Us:

• E-mail: info@comhoma.com
• Web: www.com
• homa.com

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

The device has been evaluated to meel general RF exposure requirements. The device can be used in porlable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>