XPO tool 51744 Engine Mounting Support User Manual

XPO tool 51744 Engine Mounting Support

INFORMATION

Please read and follow the operating instructions and safety information prior to the initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments. The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual or in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you. Send us an e-mail to:

• service@wiltec.info
• or use our contact form: https://www.wiltec.de/contacts/
• The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch
• Our postal address is:
• To return your goods for exchange, repair or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
• E-mail: service@wiltec.info
• Tel: +49 2403 55592–0
• Fax: +49 2403 55592–15

Introduction

Thank you for choosing to purchase this quality product. To minimize the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.

Description

The engine stand, having a capacity of up to 900 kg, provides an ideal help for working on engines or transmissions. A large variety of adjustments and adaption possibilities offer a high degree of flexibility and security. While working, turn the engine about 360° in order to get access even to areas that are difficult to reach normally. The four installation points can be easily adjusted with regard to angle and distance and thus allow a universal adjustment for any engine – with the four steel rollers ensuring a safe position and easy drivability of the entire construction.

Safety instructions/warnings

The owner and/or user must have read and understood the operating instructions of the device before using it. Installed personnel should be cautious, competent, trained, and qualified in the safe handling of the working equipment used when working with motors and their components. Warnings should be read and understood.

• Be familiar with the application control, the application process, and the warnings.
• Make sure that all connectors are attached and secure.
• Make sure to know the contents of the instructions for use.
• This device is not intended to be used by persons (including children) with reduced physical or mental abilities or with a lack of experience and knowledge unless they be supervised and/or instructed by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the device.
• Ensure that the load is free and no obstacles may hinder/prevent the lifting.
• Make sure that the load cannot shift or slide.
• After a couple of centimeters, check the charge for even repartition before continuing.
• Avoid the charge swings.
• Make sure that there is nobody near the charge.
• Warn persons about the charge being lifted.
• Immediately contact your superior or your workshop if something unforeseen happens.
• Never exceed the maximum charge capacity.
• Never use damaged, inoperative engine supports.
• Never use bent, damaged, or worn lifting devices.
• Never lift charges with obstacles possibly hindering.
• Stay concentrated and do not allow any distractions during the process.
• Never use the load receptacle to lift, help, or transport people.
• NEVER LIFT CHARGES ABOVE PERSONS’ HEADS!
• Unsecured charges might lead to injuries of limbs or bones, even to fatal ones.
• Do not leave loads lifted unattended.
• Avoid any contact of the engine mounting support and other objects.
• Never try to extend or expand the lifting device.
• Do not use welding equipment near the support.
• Always make sure that the workplace is well-lit.
• Make sure to wear solid shoes.
• Use a hair net for long hair.
• Wear appropriate clothing.
• Take off jewelry (rings, earrings, watches, etc.).
• Make sure not to wear loose strips or belts.
• Only use the engine support if you feel able to.
• Long working in an upright position can cause a feeling of dizziness. Make regular breaks and drink enough.
• Do not overload the support. Never use the engine support as you would use a jack. This engine mounting device is only designed for the installation and removal of parts of a vehicle.
• Only use the engine support on a level and solid surface that can bear the load indicated.
• Before beginning work on/under a vehicle, ensure that the vehicle itself is properly raised and secured.
• Never open threaded connections that are under charge/pressure.
• Make sure that the load is centered on the support.

Exploded view and parts list

Important note: Reproduction and any commercial use (of parts) of this operating manual, requires written permission of WilTec Wildanger Technik GmbH.

• https://www.XPOtool.com

References

• WilTec - Ihr Online Shop für Haus, Garten, Werkstatt, Freizeit

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>