PHANTEKS NV5 Premium D-RGB Kit Installation Guide

: June 13, 2024
: PHANTEKS

Table of Contents

PHANTEKS NV5 Premium D-RGB Kit
Product Information
Product Usage Instructions
INSTALLATION GUIDE
- INSTALL PREMIUM D-RGB KIT
- INSTALL MOTHERBOARD COVER
CONNECT D-RGB KIT TO HUB
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHANTEKS NV5 Premium D-RGB Kit

PHANTEKS-NV5-Premium-D-RGB-Kit-product

Product Information

The product is the NV5 Premium D-RGB Kit, manufactured by Phanteks. It is a lighting kit designed for use with the NV5 chassis. The kit includes D-RGB strips, a D-RGB hub, and various cables for installation.

Scope of Delivery

Thumb Screw x1
D-RGB Hub Input Cable x1
NV5 Premium D-RGB Kit x1
NV5 Motherboard Cover x1
D-RGB Output Cables x3
SATA Cable x1

Product Usage Instructions

Panel Removal
It is recommended to remove all external panels before starting the installation process. For further instructions, please check the NV5 chassis manual.

Remove the top panel by loosening the thumb screws and sliding it back.
Remove the glass panel by loosening the thumb screws and sliding it back.
Remove the front glass panel by removing the two screws and sliding it to the left.
Remove the right side panel by loosening the two thumb screws and sliding it back.

Install Premium D-RGB Kit
Slide the D-RGB strip gently into the top and bottom of the NV5 chassis. The D-RGB strip will secure itself with integrated magnets. To install the side D-RGB strip, align the bottom with the lower D-RGB strip and gently slide it to the back to align it with the top D-RGB strip. The D-RGB strip will secure itself with integrated magnets.

Connect D-RGB LED Strip
With all D-RGB strips installed, connect them all together by connecting them to the Digital Output cable provided with the D-RGB Kit Hub. For further instructions, see the chapter “Connect D-RGB Kit to Hub” on page 3.

Install Motherboard Cover
Remove the two highlighted rubber grommets. These can be gently pulled out. There are two positions on how to place the motherboard cover. Slide the motherboard cover down to initially secure it, then use the thumb screw to fully secure the motherboard cover.

Connect D-RGB Kit to Hub
Connect the D-RGB strips to the included RGB hub in two of the three Digital ports. Next, connect the Input to the NV5 D-RGB controller, and finally, connect the SATA to the power supply.

THIS MANUAL IS FOR THE FOLLOWING MODELS

PH-PLEDKT_NV5_DBK01: NV5 Premium D-RGB Kit Black
PH-PLEDKT_NV5_DWT01: NV5 Premium D-RGB Kit White

INSTALLATION GUIDE

Remove Install
Phanteks will not take responsibility for any damages incurred due to incorrect installation or usage of this product.

SCOPE OF DELIVERY PHANTEKS-NV5-Premium-D-RGB-Kit-fig-
13

PANEL REMOVAL

It is recommended to remove all external panels before starting the installation process. For further instructions please check the NV5 chassis manual.

Remove the top panel by loosen the thumb screws and slide it back.
Remove the glass panel by loosen the thumb screws and slide it back.
Remove the front glass panel by removing the two screws and slide it to the left.
Remove the right side panel by loosen the two thumb screws and slide it back. $PHANTEKS-NV5-Premium-D-RGB-Kit-fig- $1$$

INSTALL PREMIUM D-RGB KIT

INSTALL TOP D-RGB STRIP

Slide the D-RGB strip gently in the top of the NV5 chassis. The D-RGB strip secures itself with intergraded magnets.

INSTALL BOTTOM D-RGB STRIP

Slide the D-RGB strip gently in the bottom of the NV5 chassis. The D-RGB strip secures itself with intergraded magnets.

INSTALL SIDE D-RGB STRIP

To install the side D-RGB strip, align the bottom with the lower D-RGB strip and gently slide it to the back to align it with the top D-RGB strip.
The D-RGB strip secures itself with intergraded magnets.

CONNECT D-RGB STRIPS

With all D-RGB strips installed, connect them all together by connecting it to the Digital Output cable provided with the D-RGB Kit Hub. For further instructions see chapter ‘Connect D-RGB Kit to Hub’