FOREVER 1696321301 Smart Watch With Camera User Manual

FOREVER 1696321301 Smart Watch With Camera

Thank you for purchasing a FOREVER product. Please read this manual before operating your device and keep it for future reference. We hope that the product will meet your expectations.

Introduction

Before using the children’s watch, read and understand the manual to ensure watch operates correctly. A children’s watch is a small telecommu­nications device used to locate its location and transmit data. The device relies on the GSM/GPRS cellular network.
IMPORTANT! The device requires the installation of a micro SIM card with the active service of making/receiving calls with the pin lock disabled. Suggested disabling voicemail. When sending location information, the watch will need access to the mobile Internet, so it is worth buying a minimum 1 GB package. During the use of the watch, network and connection fees may be charged according to the operator’s tariff. For safety reasons, the watch can be assigned to one login or with the consent of the former, so that an unauthorized person does not monitor the child.
Therefore, if you want to give the watch to a third party, remem­ber to remove the watch from the app. If this is not done, the next user will not be able to fully use the watch.
How to remove a watch from the app, see the chapter on the app and its features later in this manual.

Manufacturer’s details/Customer service
TelForceOne S.A.
street Krakowska 119
50-428 Wroclaw
Poland
Hotline: (+48) 71 327 20 00
Email: [email protected]
Designed in Poland
Made in China

OVERVIEW

1. Camera
2. ON/OFF/SOS buttons
3. Micro SIM card slot
4. Function/Return button
5. Charging port

Specification

• Display: 1.44″ 128 x 728 px
• Touch screen: yes
• Supported network: 2 G
• Location: LBS
• Waterproof protection: IP 65
• Standby time: up to 2-3 days
• Battery: Li-Ion 3.7V .400 mAh, 1.48Wh
• Power supply: 5 V – 0.2 A
• Microphone and speaker. built-in
• Camera: 0.0SMP
• micro-SIM card
• Compatibility: Android > 5.0, iOS > 8.0
• Frequency range: GSM 900/1800 MHZ
• Maximum power: 33.30 dBm EiRP

Kit contains:

• watch
• USB Charging Cable
• user manual

Charging:
Insert the included charging cable to the charging port on your watch. The magnetic connector will allow us to connect the cable correctly. Plug the other end into the power source. It is recommended to use a charger with SV output parameters. Charger is not included. A message will be displayed on the watch screen when the charging starts

User Manual

1. SIM card installation:

   • Always make sure the watch is off before inserting or removing the SIM card.
   • Unscrew the rubber protection gently, then press the SIM card with the chip up until you hear a click. Close and tighten the cap.
     NOTE: Usually, to properly install the card, it is necessary to use an additional tool that will allow us to push it to the right place.

2. Initial start-up:

   • After installing the SIM card in the watch and charging the device, we can start it by pressing and holding the  2 ON/OFF button
   • When started, the watch will connect to the mobile network automatically.

3. Use of the watch:

   • We operate the watch using the touch screen. While swiping the screen, move between individual functions and select a given function by pressing the screen.
   • To exit or return, use the function button  4 or 2.

WATCH MENU

1. The main screen of the watch showing the current date and time, the battery level, the mobile connection icon and the number of contractual rewards received.
2. Allows you to make a phone call to the numbers entered in the application.
3. Camera. Allows you to take photos.
4. Gallery. Overview of the photos taken.
5. Mathematical game. The user performs mathematical tasks. The game has three levels of difficulty.
6. Chat. It allows for communication in text form.
7. Information about the watch. It allows you to read the registration QR code for the device and the application QR code.

Application support

Search for Forever KidsCare on Google Play or Forever Care on the App Store. Download and Install.

Account and watch registration:
In the registration window, enter your email address, password and area of use of the watch. Then enter or scan the watch code ( REG CODE) located on the bottom of the packaging, on the label attached to the strap or in the watch menu.

Features:

• Chat: Send a text or voice message to your watch by typing it on your keyboard or recording it using your phone’s microphone. Here you can also listen to voice messages sent from the watch.

• Route: select the date and time interval to display the route traveled.
  NOTE: Not available on devices with LBS location only.

• Map: Select the map icon to display the current location of the watch.
  NOTE: For watches with a location of only LBS, the map will show the location of the GSM antenna to which the watch is currently connected, not the watch itself. This is the so-called area location.

• Safety zone: designate a safety zone when the watch is outside the selected zone, you will receive a notification from the app.
  NOTE: Not available on devices with LBS location only.

• Reward: Select the number of rewards you want to send to your child. Once approved, the reward information will be sent to the watch.

• Alarm clock: setting the alarm clock. Set the selected time and repetition rate.

• Find the watch: select the function to find the device if it is near you. The watch will call You, informing you of its location.

• Notifications: here you receive and have a preview of any notifications and alarms received from the watch.

• Remote camera: Take a photo with your watch camera and get it on your phone. The photograph taken appears after a certain waiting time depending on the signal strength of the cellular network.

• My profile:

  • Personal data: Your account settings
  • Device list: Add, edit, or remove a watch association.
  • Change password: Change the password for your account.

Settings

• SOS numbers: when the watch user presses and holds the SOS button, the watch makes an automatic emergency call to the three contacts defined here.
• Voice monitoring: enter the phone number to which the call from the watch is to be called in order to listen to its surroundings. Answer the call and see what’s happening nearby. The user of the watch does not have any notification that such a call has been made.
• Do not disturb: select the time during the day when the user of the watch will not receive phone calls.
• Location mode: select normal mode -refresh the location of the watch once every ten minutes, save energy- once an hour, track- once a minute.
• SMS notifications: enter the number to which you want to receive SMS notifications about events such as: low battery in the watch, activation of the SOS alarm with the watch button.
• Phonebook: define up to ten contacts that the watch user will have available in the phonebook.
• Time zone: Set your time zone so that the watch shows the correct date and time on the screen.
• Language: Select one of the available languages of the watch.
• Setting switch: turn on or off the functions of the watch
• LBS location: enable or disable the location using the antennas of the network operators.
• Turn off the watch remotely: the watch will be turned off remotely.
• Restart the watch will be rebooted remotely.

Questions, problems and solutions
The application does not accept commands and shows information that the watch is not online. Off-line

• Check whether the GSM signal is correct -whether the range columns are available/visible on the display. — If they are crossed out, please turn off the watch. Check that the SIM card is correctly installed in the watch, that it supports 2G Internet and that an internet data package is available. Turn on the watch If the range columns are still crossed out, proceed to the next point.
• Check whether the data transfer arrows appear, if not, set the APN (Access Point Name- a specific packet network, e.g. Internet Please send a text message to the watch number with the content pw,123456,APN, intemet.,,XXXXX#
  *”Internet· means the APN of a particular operator, available on the website or through the helplines of a given operator.
• the X character indicates the digits assigned to a specific operator 26003 -ORANGE
  26001 -PLUS
  26006-PLAY
  26002 -T-MOBILE
  other code digits are available at manual/forever.eu or www.mcc- mnc.com/

After sending the message, wait a few minutes for the watch to download the settings from the network. The data transfer arrows will appear.

• Please send a text message with the content pw,123456,ts#, in response, the watch will send us the watch parameters. Example: ver:G36WS_YDEv7.1_2019.12.19_09.45.40;
  ID: 1234567890;
  imei:123456789012345;
  ip_url:52.28.132.157;
  port:8001;
  upload:600S;
  bat level:96;
  Language 1
  zone:8.00;

• Check the data received in the SMS with the watch number.

• If the ID/I MEI/REG CODE number differs from the badge number attached to the watch or the bottom of the packaging, a new IMEI number must be set.

• Send from the phone to the number of the card installed in the SMS watch with the following content: pw,123456,imei,xxxxxxxxxxxxxxx# where X are the numbers from the badge-the watch, after receiving an SMS with a code, sends back an SMS with a valid IMEI number in response, for
  example: pw,723456,imei,359674514986574#

• If the IP_URL and PORT is different from the example above, send an SMS from the phone to the SIM card number installed in the watch with the content pw,123456,ip,52.28.132.157,8001#-the watch will respond with a text message with the content [surl ,52.28132.157,port ,8001 #]ok.l

• The line from GP RS/NET should contain. OK”. If there is a .NO”, the watch is not connected to the mains. Please follow the recommendations above.

• The value in brackets shows the signal strength.

ATTENTION: please pay attention to punctuation and spaces when writing text messages. This is very important because not using the signs correctly will cause the commands to be misinterpreted by the watch and remain unanswered.

Unable to call the watch. Signal busy or subscriber not responding.
Reason: The watch does not recognize the incoming number or the app is set to do not disturb.
The Solution:

• Check that the number you are calling from is not restricted.
• Check if contact numbers are set in the application.
• The watch only receives calls from numbers previously set in the app contacts.

The watch does not show the current time and date
Reason: The watch did not connect to the application server to update the time.
The Solution:

• If the watch shows a few hours back, check and select the appropriate time zone through the app.
• You can send a configuration SMS to the SIM number of the watch with the following content: pw, 123456, time, and hour. minute.second, date, year. month.day#-for instance giving the correct hour and date: pw,123456,ti­me,09.50.00, date,2016.06.01#

A message appears that it is not possible to assign the watch to the application
The watch is already assigned to another login/account so it has been used before. For safety reasons, the watch can be assigned to one login or with the consent of the former, so that an unauthorized person does not monitor the child. Contact the previous owner to remove the device from their app. If this is not possible, write a request to reset the IMEI of the device, providing its number and proof of purchase. We need to be sure about the owner of the watch. There is data that is sensitive and its leakage can have serious consequences. In addition, the watch is used to monitor the child and unauthorized access is dangerous.

Safety Warnings

• Please read the instructions in the manual carefully. Failure to follow these instructions may be unsafe or illegal.
• The device should only be used for its intended purpose.
• For charging, connect the product only to the appropriate mains socket.
• The packaging is not a toy. Keep them away from children as soon as they are unpacked.
• The unit has a built-in chargeable battery. Avoid exposing the battery to very low or very high temperatures. Extreme temperatures can affect Ill the capacity and life of the battery. Avoid exposing the battery to liquids and metal objects. A used or damaged battery must be placed in a special container. Overcharging the battery may damage it. Therefore, do not charge the battery for longer than necessary to fully charge it
• Do not leave the device unchecked while charging.
• This product may only be repaired by a qualified manufacturer’s service or an authorized service center. Repair of the device by an unqualified service or by an unauthorized service point may result in damage to the device and loss of warranty.
• The manufacturer is not responsible for damage caused by self-modifications.
• Do not use the product when it is damaged.
• Protect the product from falling and strong shocks.
• Do not bend or jam the charging cable. When pulling out the cord, grasp the plug directly, never the cord itself.
• Only use a dry cloth to clean the appliance. Do not use products with a high acid or alkaline concentration.

SYMBOLS

Correct disposal of waste equipment

The device is marked with the symbol of a crossed-out garbage container, in accordance with the European Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). Products marked with this symbol should not be disposed of with other dispose of waste electrical and electronic equipment by delivering it to the designated point at which such hazardous waste is recycled. The accumulation of this type of waste in indicated places and the proper process of its recovery contribute to the protection of natural resources. Proper recycling of waste electrical and electronic equipment has a beneficial effect on human health and the environment.

Correct disposal of the used battery
In accordance with EU Directive 2006/66/EC, as amended by Directive 2013/56/EU on the disposal of batteries, this product is marked with the symbol of a crossed-out waste bin. The symbol indicates that the batteries and accumulators used in this product should not be disposed of together with normal household waste, but treated in accordance with the directive and local regulations.

Declaration of conformity with EU directives
TELFORCEONE SA hereby declares that the radio device SMARTWATCH WITH A CAMERA KW-220 complies with Directive 2014/53/EU. The full text of the EU declaration of Conformity is available at the following internet address: https://www.manual.forever.eu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>