SONICGRACE SC-C1 Smart Pet Water Fountain User Manual
- June 13, 2024
- SONICGRACE
Table of Contents
SONICGRACE SC-C1 Smart Pet Water Fountain
Before using the product, Please read the operation guide carefully
Product Details
Indicator Light
Reset/ Mode Switch
Button: The default indicator light flashes quickly (WIFI configuration) mode. If you need to switch (hotspot network configuration) mode, please press and hold the reset button for 10 seconds to enter the slow flashing (hotspot network configuration) mode, and press 10s again to restore factory settings.
Installation and use
-
Please clean the water filter with water before initially using
Water filter installation: When installing, please note that the convex surface is facing down and the flat surface is facing upward. -
Filter box installation: the installed filter box positioning groove and the filter positioning bar on the top cover of the water tank should align, and push filter box from the inside to the outside to complete the installation.
-
Install the upper cover of the water tank: Attention! Please install as shown in the picture The outlet pipe of the upper cover is aligned with the outlet of the water pump, otherwise the installa tion cannot be completed.
-
Please use DC5V power adapter.
Smart App Operation Steps
- Download the “eco4life” App, register an account, and sign in.
- Turn on the phone’s Bluetooth and location information and wait for the device to be automatically discovered.
- Enter WiFi password (name without Chinese, password without special symbols)
- Waiting to connect to the network
- Added successfully
- give a name to the device
- Click the device icon to enter the main interface
- Enter the main interface, can select the corresponding option settings according to your needs
- Filter replacement and cleaning time can be customized according to needs
- Enter the main interface to click setting Tap the icon in the upper right corner
- Enter the settings menu option, click “Share Device’
- Add sharing and link accounts (you can become family members only after linking)
Troubleshooting
The connection failed, Please check
- Do not use Chinese for the WiFi name and password. Do not exceed 12 digits. Please use a combination of numbers and letters. 5G WiFi signals are not supported. Please use 2.4G WiFi signals.
- The multi-level network leads to network restrictions, causing the water dispenser to fail to connect to the network server.
- Some software conflicts in the phone can also cause the connection to fail. Please restart the phone. Close the non-mobile phone system software that started with the mobile phone, turn on the mobile phone’s Bluetooth and positioning, and then try to reconnect to the water dispenser
Tips
- Please replace the water filter within 30 days.
- Please replace the water pump filter cotton within 30 days.
- suggested cleaning the water tank and water pump filter cotton within 7 days
- electronic devices at the bottom of the water tank, please do not soak in water when cleaning
- The drinking fountain is offline, please check the distance between the drinking fountain and the router at home, not more than 10 meters, and try not to divide the wall in between. According to WiFi characteristics, the WiFi signal of the partition wall will drop sharply, resulting in unstable connection and offline
- There is no response when turning on the machine, first, check whether the power is plugged in and the power switch is turned on. If they are all plugged in, check whether the power supply is damaged, and contact customer service to purchase the power supply.
After opening the package, please make sure that the Water fountain is in good condition, Please check the list to confirm if the accessories are complete.
- Water fountain X1
- Power cord X1
- Manual X1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>