IKEA LED2005R5 TRÅDFRI Smart Wireless Dimmable White Spectrum User Guide
- June 13, 2024
- Ikea
Table of Contents
IKEA LED2005R5 TRÅDFRI Smart Wireless Dimmable White Spectrum
Product Information
- Product Name: LED2005R5, LED2106R3
- Manufacturer: IKEA of Sweden AB
Product Usage Instructions
- Before using your light source, it needs to be paired with a steering device.
- Ensure that your light source is installed and the main power switch is turned on.
- Hold the steering device close to the light source you want to add, no more than 5 cm away.
- Press and hold the pairing button for at least 10 seconds.
- A red light will shine steadily on the steering device, indicating that the pairing process has started.
- Your light source will begin to dim and finally flash once, indicating that it has been successfully paired.
- You can pair up to 10 light sources with 1 steering device.
- Make sure to pair the light sources one at a time. If they are close to each other, disconnect those that have already been paired from the main power switch.
- Do not use standard dimmers with this product. It can only be controlled by IKEA Smart lighting products or the specified control provided in the instructions.
- The color temperature of the light source can be switched between 2200K (warm glow), 2700K (warm white), and 4000K (cool white).
- To reset your device, toggle the main switch 6 times.
CAUTION:
Please dispose of the product separately from household waste. Follow local
environmental regulations for waste disposal and recycle the item to minimize
its impact on the environment. Contact your IKEA store for more information.
For any further assistance or inquiries, please refer to the product manual or contact IKEA directly.
Installation
Insert Remote Battery
ADD LIGHT SOURCES TO YOUR STEERING DEVICE
Before you can use your light source you’ll need to pair it with a steering device.
To add more light sources, just repeat the steps below:
- Make sure that your light source is installed and the main power switch is turned on.
- Hold the steering device close to the light source you want to add (no more than 5 cm away).
- Press and hold the pairing button for at least 10 seconds. A red light will shine steadily on the steering device. Your light source will begin to dim and finally flash one time to indicate that it has been successfully paired.
- Up to 10 light sources can be paired with 1 steering device.
- Make sure to pair them one at a time. If the light sources are close to each other, disconnect those that have already been paired from the main power switch.
CAUTION:
- DO NOT USE WITH STANDARD DIMMERS. Only use the control provided with or specified by these instructions to control this bulb. This bulb will not operate properly when connected to a standard (incandescent) dimmer or dimming control. Only controllable by IKEA Smart lighting products.
- The color temperature can be switched between 2200K (warm glow), 2700K (warm white), and 4000K (cool white).
RESET YOUR DEVICE
Toggle the main switch 6 times.
TECHNICAL DATA
- Operating frequency: 2405 – 2480 MHz
- Output power: 10 dBm
- Manufacturer: IKEA of Sweden AB
- Address: Box 702, SE-343 81 Älmhult, SWEDEN.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
© Inter IKEA Systems B.V. 2022.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>