ORIGIN 21 W3006SMB 36-in to 72-in Brushed Gold Iron Corner Curtain Rod

Product Information

The Drapery Rod Set is a set of curtain rods designed to hold and support curtains or drapes. It is available in three different models: #W3006SMB,

W3006SBN, and #W3006SBG. The estimated assembly time for this product is 15

minutes.

Tools Required
To assemble and install the Drapery Rod Set, the following tools are required:

• Unspecified tools

Care and Maintenance
Before attempting to assemble or install the product, please read and understand the entire manual. Proper care and maintenance are essential for ensuring the longevity and performance of the Drapery Rod Set.

Package Contents
The package includes the following items:

• A larger bracket (noted with an L at the back of the bracket)
• Two brackets (one preassembled)

Hardware Contents
The hardware contents include:

• Four screws
• One preassembled item
• Four additional items (not specified)
• Two items labeled as 4a and 4b

Product Usage Instructions

• Step 1: Before starting the assembly process, make sure to read and understand the entire manual.
• Step 2: Unfasten the screws between the rods and side brackets [A&B] to remove the side brackets.
• Step 3a: Choose either A or B as the side bracket and proceed to the next step.
• Step 3b: Choose either A or B as the side bracket and proceed to the next step.
• Step 4: Assemble the remaining components according to the provided instructions.
• Step 5: Install the Drapery Rod Set following the recommended guidelines and using the necessary tools.

If you encounter any problems or have further questions, please contact our customer service department at 888-251-1026, from 8 a.m. to 8 p.m. EST, Monday to Sunday. You can also reach us via email at ascs@lowes.com.

Thank you for purchasing this ORIGIN 21 product. We’ve created these easy-to- follow instructions to ensure you spend your time enjoying the product instead of putting it together. if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 888-251-1026, 8 a.m. – 8 p.m.
EST, Monday – Sunday. You could also contact us at ascs@lowes.com

TROUBLESHOOTING

screw hole BEFORE swiveling the bracket arm back to original position and installing the bottom screw hole.
Rod does not extend to desired length / Rod is too short for desired length.| Only two rods were used, and the third larger diameter rod was not applied.| Add the third larger diameter rod to form a longer 3-piece telescopic rod (see step 4).
Rod is too long for desired length.| Three rods were all used, but only two rods are needed.| Discard one larger diameter rod and install just the 2-piece telescopic rod (see step 4).
Rods slide / slip when curtain panels are pulled left and right.| The rods are not properly secured in the brackets.| Tighten the rod-securing-screws on the brackets (see step 6).

PREPARATION

Before beginning installation of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble or install the product.

Estimated Assembly Time: 15 minutes

TOOLS REQUIRED

CARE AND MAINTENANCE

Dust gently with dry cloth.
Periodically check to make sure all components are properly positioned, free from damage and firmly connected

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or install the product.

FEELING CONFIDENT? START YOUR NEXT PROJECT

• Visit lowes.com for more information.

PACKAGE CONTENTS

HARDWARE CONTENTS

INSTALLATION OVERVIEW

Unfasten screws between rods and side brackets [A&B] to remove side brackets.
Please note the removed screws and washers will be used later, so please keep them within sight.

Use both brackets [A&B] as guides to mark desired locations on wall for mounting screws. Use level to ensure screw holes alignment.
Stud installation is recommended, use a stud finder to locate stud. If no studs are present, provided drywall anchors can be used.

For wood/stud installations, anchors [BB] are not required. Pre drill 3/32” pilot holes at market locations.

For drywall/paneling installations, anchors [BB] are required. Predrill 1/4” pilot holes at market locations, then screw anchors [BB] into pilot holes.

For installation rod length shorter than 49” (for 36”-72” rod set), attach drapery panel (sold separately) onto outer rod [C], place rods on center bracket [AA] and secure outer rod [C] onto larger bracket [A] with the washer and screw removed from Step 1. Repeat this operation on the other side for inner rod [D] and smaller bracket [B].

For installation rod length wider than 49” (for 36”-72” rod set), attach drapery panel (sold separately) onto outer rod [C], place rods on center bracket [AA] and secure rod onto larger bracket [A] with the washer and screw removed from Step 1. Insert inner rod [D] into the other outer rod [C] to extend rod length. Attach another drapery panel onto last outer rod [C], and secure rod onto smaller bracket [B] with washer and screw.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>